product data sheet www.luminus.com ? 2010 luminus devices, inc. all rights reserved last updated 3-5-10 pds_001579 rev 0 1 luminus led ballast 30w single output led ballast LB-030-15-1A75-01-N features luminus led ballasts are ideal turn key solutions f or high power led lighting applications. the featur es, size and performance make them suitable for commercial light ing utilizing luminus sst-50 devices for both indoor and outdoor installations. ? designed for luminus sst-50 led ? capable of driving 1 to 4 leds in series at 1.75a ? universal ac input ? isolated plastic case with ip64 ingress protection ? protections: short circuit / overload / over voltage ? ul1310 class 2 power supply ? cooling by free air convection ? rohs compliant ip64
product data sheet ? 2010 luminus devices, inc. all rights reserved page 2 specifications dc voltage 15v led operating voltage note 7 3 ~ 15v rated current 1.75a rated power 30w ripple & noise note 2 120mvp-p voltage tolerance note 3 5.0% load regulation 2.0% setup, rise time note 6 500ms, 80ms / 230vac 1000ms, 80ms / 11 5vac at full load output hold up time (typ.) 50ms/230vac 16ms/115v ac at full load voltage range 90 ~ 264vac frequency range 47 ~ 63hz efficiency (typ.) 82% ac current 0.75a/115vac 0.48a/230vac inrush current (max.) cold start 60a/230vac input leakage current 0.25ma / 240vac 95 ~ 110% over current note 4 protection type: constant current limiting, recover s automatically after fault condition is removed 17.5 ~ 21v protection over voltage protection type: shut down o/p voltage, re-power on to recover working temp -20 ~ +60c working humidity 20 - 90% rh non-condensing environment storage temp., humidity -40 ~ +80c, 10 ~ 95% rh safety standards ul1310 class 2, can/csa c22.2 no. 223-m91, ip64 appr oved, design refer to tuv en60950-1, en61347-2-13 withstand voltage i/p-o/p: 3kvac isolation resistance i/p-o/p: >100m ohms / 500vdc / 25c / 70% rh emi conduction & radiation compliance to en55022 (cispr22) class b harmonic current compliance to en61000-3-2,-3 safety & emc ems immunity compliance to en6100-4-2,3,4,5,6,8,11; env50204, en 55024, light industry level, criteria a mtbf 628.3khrs min. mil-hdbk-217f (25c) other dimension 145 * 47 * 30mm (l*w*h)
product data sheet ? 2010 luminus devices, inc. all rights reserved page 3 mechanical drawing block diagram
product data sheet ? 2010 luminus devices, inc. all rights reserved page 4 derating curve static characteristics notes : 1. all parameters not specially mentioned are measured at 230vac, rated load and 25c ambient temperature. 2. ripple & noise are measured at 20mhz of bandwidth b y using a 12 twisted pair wire terminated with a 0 .1uf & 47uf parallel capacitor. 3. tolerance: includes set up tolerance, line regulati on and load regulation. 4. derating may be needed under low input voltage. ple ase check the derating curve for more details. 5. the power supply is considered a component which wi ll be installed in final equipment. the final equip ment muse be re-confirmed that it still meets emc directives. 6. length of set up time is measured at first cold sta rt. turning the power supply on/off may lead to inc rease of set up time. 7. constant current operation region is within the spec ified output voltage range above. this is the suita ble operation region for led related applications.
product data sheet ? 2010 luminus devices, inc. all rights reserved page 5 ordering information ordering part number description LB-030-15-1A75-01-N 30w led ballast, 3 C 15v / 1.75a output www.luminus.com the products, their specifications and other inform ation appearing in this document are subject to cha nge by luminus devices without notice. luminus devices assumes no liability for errors that may appear in this docume nt, and no liability otherwise arising from the application or use of th e product or information contained herein. none of the information provided herein should be considered to be a repres entation of the fitness or suitability of the produ ct for any particular application or as any other form of warranty. lumin us devices product warranties are limited to only such warranties as accompany a purchase contract or purchase order for such products. nothing herein is to be construed a s constituting an additional warranty. no information contained in th is publication may be considered as a waiver by lum inus devices of any intellectual property rights that luminus devic es may have in such information. phlatlight ? is a registered trademark of luminus devices, inc., all rights reserved.
|
