|
|
|
MAXIM - Dallas Semiconductor
|
Part No. |
MAX6901EVSYS MAX6902EVKIT MAX6901EVKIT
|
OCR Text |
...ether. The two boards should be flush against each other. Do not turn on the power until all connections are made. 2) Connect the 25-pin I/O extension cable from the computer's parallel port to the MAXSMBus board. The EV kit software uses a... |
Description |
Evaluation System/Evaluation Kit for the MAX6901 Evaluation System/Evaluation Kit for the MAX6902
|
File Size |
200.47K /
9 Page |
View
it Online |
Download Datasheet |
|
|
|
Maxim Integrated Products, Inc.
|
Part No. |
MAX6902EVSYS
|
OCR Text |
...ether. The two boards should be flush against each other. Do not turn on the power until all connections are made. 2) Connect the 25-pin I/O extension cable from the computer's parallel port to the MAXSMbus board. The EV kit software uses a... |
Description |
Evaluation System/Evaluation Kit for the MAX6902
|
File Size |
210.81K /
9 Page |
View
it Online |
Download Datasheet |
|
|
|
ETC[ETC]
|
Part No. |
UC3804X UG3804X UY3864X UB3804X UR3864X
|
OCR Text |
flush Mount Round Shape Type
Features
Package 3 Round shape type, UB,UC,UG : Water Clear epoxy UY : Pale Yellow Clear epoxy UR : Pale Red Clear epoxy Outer Dimension 3 Round shape type Operation temperature range. Storage Temperature :-... |
Description |
Single Color PI 3 flush Mount Round Shape Type
|
File Size |
301.32K /
24 Page |
View
it Online |
Download Datasheet |
|
|
|
MAXIM - Dallas Semiconductor
|
Part No. |
MAX1270EVC16 MAX1270EVSYS MAX1270EVKIT
|
OCR Text |
...ether. The two boards should be flush against one another. 2) Connect an +8V to +12V DC-power source to the C module at terminal block J2, located next to the ON/OFF switch, along the top edge of the C module. Observe the polarity marked on... |
Description |
Evaluation Kit/Evaluation System for the MAX1270/MAX1271/MAX127/MAX128 Evaluation Kit/Evaluation System for the MAX1270/ MAX1271/MAX127/MAX128
|
File Size |
187.97K /
7 Page |
View
it Online |
Download Datasheet |
|
|
|
MAXIM - Dallas Semiconductor
|
Part No. |
MAX1662EVKIT
|
OCR Text |
...ether. The two boards should be flush against each other. Make sure switch SW1 on the MAX1662 EV kit is in the "off" position. Connect a +7V to +20V DC power supply to the pads labeled POS9 and GND1 of the SMBus interface board. Make sure J... |
Description |
Evaluation Kit for the MAX1662
|
File Size |
151.38K /
16 Page |
View
it Online |
Download Datasheet |
|
|
|
MAXIM - Dallas Semiconductor
|
Part No. |
MAX1117EVSYS
|
OCR Text |
...ether. The two boards should be flush against one another. 2) Ensure that JU1 and JU2 are open and place the C module's SW1 in the OFF position. 3) Connect a +7V to +16V DC power source to the C module at the terminal block, located next to... |
Description |
Evaluation System for the MAX1115/MAX1116/MAX1117/MAX1118/MAX1119
|
File Size |
137.50K /
4 Page |
View
it Online |
Download Datasheet |
|
Price and Availability
|