aluminum electrolytic capacitors (smd type) surface mount type series: medium-size tp type: v high temperature lead-free reflow endurance : 125 3000 to 4000 h high ripple current (2 to 5 times as high as tk ser ies) low esr (40 to 70 % lower than tk series) large capacitance (up to 80 % larger than tk series) vibration-proof product (30g guaranteed) is available upon request rohs compliant example25 v.dc 1800 f marking color : black unitmm r.voltage code unitv.dc ?the dimensions of the vibration-proof products, please refer to the page of the mounting specification. shelf life after storage for 1000 hours at +125 2 with no voltage applied and th en being (with voltage treatment) 120 1 k 10 k 100 k to 0.75 0.90 0.95 1.00 capacitance change within 10 % of the initial value aec-q200 within the initial limit leakage current after reflow soldering and then being stabilized at +20 , capacitors shall meet the resistance to soldering heat within the initial limit frequency (hz) correction factor following limits. stabilized at +20 , capacitors shall meet the limits specifi ed in endurance. dimensions d dissipation factortan ) aec-q200 compliant l j 63 25 e i w p k a, b h marking frequency correction factor for ripple current code size design and specifications are each subject to change without noti ce. ask factory for the current technical specifications befor e purchase and/or use. should a safety concern arise regarding this product, please be su re to contact us immediately. 17-apr-19 19.0 21.50.5 18.0 k21 17.0 16.50.5 16.0 j16 21.0 max. k16 18.0 16.50.5 19.0 21.0 max. 6.7 1.200.3 6.7 0.700.3 35 80 k leakage current rated voltage range 25 v.dc to 80 v.dc characteristics at low temperature rated voltage (v.dc) z (C25 ) / z (+20 ) z (C40 ) / z (+20 ) capacitance tolerance 20 % (120 hz / +20 ) leakage current i Q 0.01 cva after 2 minutes dissipation factor (tan ) please see the attached characteristics list capacitance range 390 f to 3300 f 25 2 4 within the initial limit endurance after applying rated working voltage for 4000 hours at +125 2 and the n being (j16, k16 size : 3000 h) capacitance change features specifications category temp. range C55 to +125 within 30 % of the initial value (35 v.dc or less : within 35 %) dissipation factortan ) Q 300 % of the initial limit 35 to 80 2 3 (impedance ratio at 120 hz) stabilized at +20 c, capacitors shall meet the followin g limits. v 0.700.3 0.700.3 6.7 6.7 1.200.3 1.200.3 5.5 6.7 19.0 max. 50 70 h 70 0.3 max. d 0.5 l h a 0.2 b 0.2 w i p i 1800 e tp k negative polarity marking ( C) capacitance ( f) series identification rated voltage code lot number mark for lead - free products (black dot) pressure relief reference size downloaded from: http:///
$ o x p l q x p ( o h f w u r o \ w l f & |