design and specifications are each subject to change without notice. ask factory for the current technical specifications before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. conductive polymer aluminum solid capacitors + ? f d l p r c w h 0.2 max. lot. no. polarity marking (?) series r. capacitance r. voltage surface mount type series : svqp 125 c 1000 h rohs compliance, halogen free speci cations features size code c6 e7 category temperature range ?55 c to +125 c rated voltage range 4 v.dc to 20 v.dc 6.3 v.dc to 20 v.dc rated capacitance range 22 f to 150 f 47 f to 220 f capacitance tolerance 20 % (120 hz / + 20 c) leakage current please see the attached characteristics list dissipation factor (tan ) please see the attached characteristics list endurance +125 c, 1000 h, rated voltage applied capacitance change within 20 % of the initial value tan < 200 % of the initial limit dc leakage current within the initial limit damp heat (steady state) +60 c, 90 % to 95 %, 1000 h, no-applied voltage capacitance change within 20 % of the initial value tan < 150 % of the initial limit dc leakage current within the initial limit (after voltage processing) marking unit : mm size code f d0.5 l +0.1 w0.2 h0.2 c0.2 r p0.2 c6 6.3 5.9 6.6 6.6 7.3 0.6 to 0.8 2.1 e7 8.0 6.9 8.3 8.3 9.0 0.6 to 0.8 3.2 ?0.4 ? 1 ripple current (100 khz/ +105 c < tx < 125 c), allowable ripple current (100 khz / tx < 105 c) ? 2 esr (100 khz to 300 khz/+20 c) ? 3 tan (120 hz/+20 c) ? 4 after 2 minutes please refer to each page in this catarog for ?reflow conditions? and ?taping specifications?. frequency 120 hz < f < 1 khz 1 khz < f < 10 khz 10 khz < f < 100 khz 100 khz < f < 500 khz coef? cient 0.05 0.3 0.7 1 series rated voltage (v.dc) rated capacitance (f) case size (mm) size code specifications standard (reel size : f 380) f d l ripple ? 1 current (mar.m.s.) allowable ? 1 ripple current (mar.m.s.) esr ? 2 (m max.) tan ? 3 lc ? 4 (a) part number min. packaging q'ty (pcs) svqp 4.0 150 6.3 5.9 c6 572 1810 40 0.12 300 4svqp150m 1000 6.3 82 6.3 5.9 538 1700 45 0.12 258 6svqp82m 1000 100 6.3 5.9 572 1810 40 0.12 315 6svqp100m 1000 220 8.0 6.9 e7 810 2560 35 0.12 693 6svqp220m 1000 10 56 6.3 5.9 c6 538 1700 45 0.12 280 10SVQP56M 1000 120 8.0 6.9 e7 810 2560 35 0.12 600 10svqp120m 1000 150 8.0 6.9 810 2560 35 0.12 750 10svqp150m 1000 16 39 6.3 5.9 c6 512 1620 50 0.10 312 16svqp39m 1000 82 8.0 6.9 e7 670 2120 40 0.12 656 16svqp82m 1000 20 22 6.3 5.9 c6 459 1450 60 0.10 220 20svqp22m 1000 47 8.3 6.9 e7 598 1890 45 0.12 470 20svqp47m 1000 dimensions (not to scale) ? externals of ? gure are the reference. frequency correction factor for ripple current characteristics list nov. 2015 01 downloaded from: http:///
if you want to use our products described in this onlin e catalog for applications requiring special qualities or reliability, or for applications where the failure or malfunction of the products may directly jeopardize human life or potentially caus e personal injury (e.g. aircraft and aerospace equipment, traffic and transportat ion equipment, combustion equipment, medical equipment, accident prevention, anti-crime eq uipment, and/or safety equipment), it is necessary to verify whether the specificatio ns of our products fit to such applications. please ensure that you will ask and check with our inquiry desk as to whether the specifications of our products fit to such applications use before you use our products. the quality and performance of our products as described in this online catalog only apply to our products when used in isolation. therefore, please en sure you evaluate and verify our products under the specific circumstances in which our pr oducts are assembled in your own products and in which our products will actually be used. if you use our products in equipment that requires a h igh degree of reliability, regardless of the application, it is recommended that you set up protectio n circuits and redundancy circuits in order to ensure safety of your equipment. the products and product specifications described in this online catalog are subject to change for improvement without prior notice. therefore, pleas e be sure to request and confirm the latest product specifications which explain the specifications of our products in detail, before you finalize the design of your applications, pu rchase, or use our products. the technical information in this online catalog provides example s of our products' typical operations and application circuits. we do not guarantee the non-infringement of third party's intellectual property rights and we do not grant any license, right, or interest in our intellectual property. if any of our products, product specifications and/or technical information in this online catalog is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially with regard to security and ex port control, shall be observed. the switchover date for compliance with the rohs directive /reach regulations varies depending on the part number or series of our products. when you use the inventory of our products for which it is unc lear whether those products are compliant with the rohs directive/reach regulation, please se lect "sales inquiry" in the website inquiry form and contact us. we do not take any responsibility for the use of our products outside the scope of the specifications, descriptions, guidelines and precautions described in this online catalog. guidelines and precautions regarding the described in this online catalog. downloaded from: http:///
|
