View EALP03SXDYA0-AM_9108301.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1 copyright ? 2010, everlight americas inc. all rights reserved. release date : feb 18 , 201 4 device no :1 www.everlight americas .com p - led ealp03sxdya0 - am lead (pb) free product - rohs compliant features ? high flux output. ? designed for high current operation. ? low thermal resistance. ? low profile. ? packaged in tubes for use with automatic ? insertion equipment. ? the product itself will remain within rohs compliant version. ? compliance with eu reach. ? compliance halogen free .(br <900 ppm ,cl <900 ppm , br+cl < 1500 ppm). a pplications ? automotive lighting ? electronic signs and signals ? spe cial lighting application device selection guide led part no. chip resin color material emitted color ealp03sxdya0 - am algainp brilliant yellow water clear
datasheet p - led ealp03sxdya0 - am 2 copyright ? 2010, everlight americas inc. all rights reserved. release date : feb 18 201 4 device no :1. www.everlight americas .com absolute maximum ratings (ta=25 parameter symbol rating unit reverse voltage v r 5 v c ontinuous forward current i f 70 ma peak forward current (duty 1/10 @1khz) i fp 160 ma power dissipation pd 220 mw led junction temperature t j 1 15 operating temperature t opr - 40 ~ + 100 storage temperature t stg - 40 ~ +1 0 0 electrostatic discharge e sd 2000 v soldering temperature(t=5 sec) t sol wave soldering : 260 for 5 sec. hand soldering : 3 5 0 for 3 sec.
datasheet p - led ealp03sxdya0 - am 3 copyright ? 2010, everlight americas inc. all rights reserved. release date : feb 18 201 4 device no :1. www.everlight americas .com electro - optical characteristics (ta=25 parameter symbol min. typ. max. unit condition total flux v 4500 6 0 00 9000 mlm i f = 70 ma peak wavelength p ----- 59 1 ----- nm i f = 70 ma dominant wavelength d 586 589 59 4 nm i f = 70 ma spectrum radiation bandwidth ? ----- 15 ----- nm i f = 70 ma viewing angle 2 1/2 ----- 5 5 ----- deg i f = 70 ma forward voltage v f 2. 1 2. 6 3. 1 v i f = 70 ma reverse current i r ----- ----- 10 a v r =5v note: 1. tolerance of total flux : 11% 2. tolerance of dominant wavelength: 1nm 3. tolerance of forward voltage: 0.1v
datasheet p - led ealp03sxdya0 - am 4 copyright ? 2010, everlight americas inc. all rights reserved. release date : feb 18 201 4 device no :1. www.everlight americas .com bin rang e of d ominant wavelength (ta=25 note: tolerance of dominant wavelength: 1nm bin min. max. unit condition 1 58 6 59 0 nm i f = 7 0 ma 2 59 0 59 4
datasheet p - led ealp03sxdya0 - am 5 copyright ? 2010, everlight americas inc. all rights reserved. release date : feb 18 201 4 device no :1. www.everlight americas .com bin range of forward voltage ( ta=25 bin min. max. unit condition 3 2. 1 2.3 v i f = 70 ma 4 2.3 2.5 5 2.5 2.7 6 2.7 2.9 7 2.9 3.1 note: tolerance of forward voltage: 0.1v
datasheet p - led ealp03sxdya0 - am 6 copyright ? 2010, everlight americas inc. all rights reserved. release date : feb 18 201 4 device no :1. www.everlight americas .com bin range of total flux (ta=25 bin min. max. unit condition r 4500 5650 mlm i f = 70 ma s 5650 7150 t 7150 9000 note: tolerance of total flux: 11%
datasheet p - led ealp03sxdya0 - am 7 copyright ? 2010, everlight americas inc. all rights reserved. release date : feb 18 201 4 device no :1. www.everlight americas .com typical electro - optical characteristics curves typical curve of spectral distribution relative intensity( ) p(nm) note: v( )=standard eye response curve; i f = 7 0 ma diagram characteristics of radiation relative intensity (%) viewing angle(degree)
datasheet p - led ealp03sxdya0 - am 8 copyright ? 2010, everlight americas inc. all rights reserved. release date : feb 18 201 4 device no :1. www.everlight americas .com forward current vs. forward voltage (ta=25 ) relative intensity vs. wavelength (ta=25 ) forward current (ma) r elative intensity forward vo ltage (v) wavelength (nm) relative intensity vs. forward current (ta=25 ) forward current vs. ambient temp (ta=25 ) r elative i ntensity maxmum dc current (ma) forward current (ma) a mbient te mperature ( ) 590 591 592 593 594 595 596 0 10 20 30 40 50 60 70 80 90 100
datasheet p - led ealp03sxdya0 - am 9 copyright ? 2010, everlight americas inc. all rights reserved. release date : feb 18 201 4 device no :1. www.everlight americas .com package dimension s note: 1. an epoxy meniscus may extend about 1.5mm(0.059") down the leads 2. tolerances unless dimensions 0.25mm 3. all dimensions are in millimeters
datasheet p - led ealp03sxdya0 - am 10 copyright ? 2010, everlight americas inc. all rights reserved. release date : feb 18 201 4 device no :1. www.everlight americas .com inner and outer label explanation outer l abel explanation ? cpn: customers product number ? p/n: product number ? qty: packing quantity ? cat: rank of (vf)(note*)(v) ? no t e : d /cie/color temperature ? hue /ref : reference ? lot no: lot number inner label explanation ? p/n: product number ? qty: packing quantity ? cat: rank of (vf)(note*)(v) ? no t e : d /cie/color temperature ? lot no: lot number
datasheet p - led ealp03sxdya0 - am 11 copyright ? 2010, everlight americas inc. all rights reserved. release date : feb 18 201 4 device no :1. www.everlight americas .com antistatic packing materials tube antistatic packing materials tube materials tube note: 1. tolerances unless mentioned 2 . 0 mm. 2. unit = mm standard boxes note: 1. tolerances unless mentioned 3 . 0 mm. 2. unit = mm
datasheet p - led ealp03sxdya0 - am 12 copyright ? 2010, everlight americas inc. all rights reserved. release date : feb 18 201 4 device no :1. www.everlight americas .com precautions for use 1. lead forming ? during lead formation , the leads should be bent at a point at least 3mm from the base of the epoxy bu lb. ? lead forming should be done before soldering. ? avoid stressing the led package during leads forming . the stress to the base may damage the leds characteristics or it may break the leds. ? cut the led leadframes at room temperature. cutting the leadframes at high temperatures may cause failure of the leds. ? when mounting the leds onto a pcb , the pcb holes must be aligned exactly with the lead position of the led. if the leds are mounted with stress at the leads, it causes deterioration of the epoxy resin an d this will degrade the leds. 2. storage ? t he leds should be stored at 30 c or less and 60 %rh or less after being shipped from everlight americas and the storage life limits are 3 months. if the leds are stored for 3 months or more, they can be stored for a y ear in a sealed container with a nitrogen atmosphere and moisture absorbent material. ? please avoid rapid transitions in ambient temperature, especially, in high humidity environments where condensation can occur. 3. soldering ? careful attention should be paid during soldering. solder the led no lower than 1.6mm from the base of stopper is recommended. ? avoiding applying any stress to the lead frame while the leds are at high temperature particularly when soldering. ? recommended soldering conditions: hand solderi ng dip soldering temp. at tip of iron 300 max. (30w max.) preheat temp. 100 max. (60 sec max.) soldering time 3 sec max. bath temp. 260 max. distance no lower than 1.6mm from the base of stopper bath time. 5 sec max. distance no lower than 1.6mm fr om the base of stopper
datasheet p - led ealp03sxdya0 - am 13 copyright ? 2010, everlight americas inc. all rights reserved. release date : feb 18 201 4 device no :1. www.everlight americas .com ? recommended soldering profile ? to avoid any stress to the lead frame while the leds are at high temperature particularly when soldering. ? dip or hand soldering should not be done more than one time. ? the len of le ds should be protected from mechanical shock or vibration until return to room temperature after soldering. ? cooling rapidly is not recommended after cold down from peak temperature. ? dipping parameters must be set and maintain according to recommended range. 4. cleaning ? cleaning with isopropyl alcohol should not more than one minute and dry it in room temperature. ? ultrasonic cleaning is prohibited which may damage the leds. 5. thermal management sufficient thermal management must be implemented. otherwise, the junction temperature of the die might be over the limit at high current driving condition and leds lifetime might be decreases dramatically. 6. esd (electrostatic discharge) ? the products are sensitive to static electricity or surge voltage. esd can damage a die and its reliability . when handling the products , the following measures against electrostatic discharge are strongly recommended: eliminating the charge grounded wrist strap , esd footw ear, clothes, and floors grounded workstation equipment and tools esd table/shelf mat made of conductive materials ? proper grounding is required for all devices, equipment, and machinery used in product assembly. surge protection should be considered when d esigning of commercial products. ? if tools or equipment contain insulating materials such as glass or plastic,
datasheet p - led ealp03sxdya0 - am 14 copyright ? 2010, everlight americas inc. all rights reserved. release date : feb 18 201 4 device no :1. www.everlight americas .com the following measures against electrostatic discharge are strongly recommen d ed: dissipating static charge with conductive materials preventing c harge generation with moisture neutralizing the charge with ionizers 7. directions for use ? the leds should be operated with forward bias. the driving circuit must be designed so that the leds are not subjected to forward or reverse voltage while it is off. if reverse voltage is continuously applied to the leds, it may cause migration resulting in led damage 8. other ? everlight americas assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratin gs and the instructions included in these specification sheets. ? these specification sheets include all the contents are protected under copyright of everlight americas corporation. please dont reproduce or cause anyone to reproduce without everlight ameri cas s permission .
datasheet p - led ealp03sxdya0 - am 15 copyright ? 2010, everlight americas inc. all rights reserved. release date : feb 18 201 4 device no :1. www.everlight americas .com application restrictions high reliability applications such as military/aerospace, automotive safety/security systems,and medical equipment may require different product. if you have any concerns, p lease contact everlight before using this product in your application. this specification guarantees the quality and performance of the product as an individual component. do not use this product beyond the specification described in this document. revision history s
datasheet p - led ealp03sxdya0 - am 16 copyright ? 2010, everlight americas inc. all rights reserved. release date : feb 18 201 4 device no :1. www.everlight americas .com rev. modified date file modified contents 1 2012 - 4 - 13 new spec . 2 2014 - 2 - 18 modify the version format

▲Up To Search▲

Price & Availability of EALP03SXDYA0-AM

	To Download EALP03SXDYA0-AM Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .