|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
luxeon 3014 is an industry standard compatible footprint for ease of installation into existing 3014 sockets and stays consistent with a 3.0mm x 1.4mm x 0.75mm package. luxeon 3014 is hot-color targeted at operating conditions65c. this low power device is an ideal choice when uniformity and reduction in spottiness is necessary for indoor designs. luxeon 3014 hot-color targeted industry standard package for uniform light features and benefits primary applications industry standard footprint and package ofering compatibility with existing designs indoor area lighting 1/9 th ansi micro-color binning enables tight color control lamps hot-color targeted at 65c which leads to better color accuracy specialty lighting rectangular package design allows for increased uniformity C monochrome led drive at maximum current, 120ma for superior value C channel lighting C signage illumination ds208-l luxeon 3014 (legacy) product datasheet ?2017 lumileds holding b.v. all rights reserved. rohs compliant no. e352519
ds208-l luxeon 3014 (legacy) product datasheet 20170216 ?2017 lumileds holding b.v. all rights reserved. i table of contents general product information 2 product test conditions .............................................................................. 2 part number nomenclature .......................................................................... 2 lumen maintenance ................................................................................. 2 environmental compliance ........................................................................... 2 performance characteristics 3 product selection guide .............................................................................. 3 optical characteristics ............................................................................... 3 electrical and thermal characteristics .................................................................. 4 absolute maximum ratings 4 characteristic curves 5 spectral power distribution characteristics ............................................................. 5 light output characteristics .......................................................................... 6 forward current characteristics ....................................................................... 7 radiation pattern characteristics ...................................................................... 8 product bin and labeling defnitions 9 decoding product bin labeling ........................................................................ 9 luminous flux bins .................................................................................. 9 color bin defnitions ................................................................................ 10 forward voltage bins ............................................................................... 16 mechanical dimensions 16 refow soldering guidelines 17 jedec moisture sensitivity ........................................................................... 17 solder pad design .................................................................................. 18 packaging and labeling information 18 pocket tape ....................................................................................... 18 reel ............................................................................................... 19 moisture barrier bag (mbb) .......................................................................... 20 shipment box ...................................................................................... 22 ds208-l luxeon 3014 (legacy) product datasheet 20170216 ?2017 lumileds holding b.v. all rights reserved. 2 general product information product test conditions luxeon 3014 leds are tested with a 20ms monopulse of 60ma at a junction temperature,t j , of 25c. forward voltage and luminous fux are binned at a t j of 25c, while color is hot targeted at a t j of 65c. part number nomenclature part numbers for luxeon 3014 follow the convention below: l 1 3 0 C a a b b 0 0 1 4 0 0 0 0 1 where: a a C designates nominal cct (22=2200k, 25=2500k, 27=2700k, 30=3000k, 35=3500k, 40=4000k, 50=5000k, 57=5700k, 65=6500k, 80=8000k, 10=10000k) b b designates minimum cri (70=70cri, 80=80cri, 90=90cri) therefore, the following part number is used for a luxeon 3014 3000k 80cri: l 1 3 0 C 3 0 8 0 0 0 1 4 0 0 0 0 1 lumen maintenance please contact your local sales representative or lumileds technical solutions manager for more information about the long- term performance of this product. environmental compliance lumileds llc is committed to providing environmentally friendly products to the solid-state lighting market. luxeon 3014 is compliant to the european union directives on the restriction of hazardous substances in electronic equipment, namely the rohs directive 2011/65/eu and reach regulation (ec) 1907/2006. lumileds llc will not intentionally add the following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (pbb) or polybrominated diphenyl ethers (pbde). ds208-l luxeon 3014 (legacy) product datasheet 20170216 ?2017 lumileds holding b.v. all rights reserved. 3 performance characteristics product selection guide table 1 product performance of luxeon 3014 at 60ma and 30ma at test temperature nominal cct [1] minimum cri [2, 3, 4] luminous flux [3] ( lm ) typical luminous efficacy (lm/w) typical luminous flux (lm) typical luminous efficacy (lm/w) part number minimum typical 60 m a 30 m a 8000k 70 23 26 140 14 151 l130-8070001400001 10000k 70 21 24 129 14 151 l130-1070001400001 2200k 80 19 21 113 11 118 L130-2280001400001 2500k 80 21 23 124 12 129 l130-2580001400001 2700k 80 20 24 129 13 139 l130-2780001400001 3000k 80 22 26 140 12 129 l130-3080001400001 3500k 80 22 26 140 13 140 l130-3580001400001 4000k 80 23 27 145 14 151 l130-4080001400001 5000k 80 23 27 145 14 151 l130-5080001400001 5700k 80 23 27 145 14 151 l130-5780001400001 6500k 80 23 27 145 14 151 l130-6580001400001 2700k 90 17 19 102 10 108 l130-2790001400001 3000k 90 17 19 102 10 108 l130-3090001400001 3500k 90 19 21 113 11 118 l130-3590001400001 4000k 90 19 21 113 11 118 l130-4090001400001 5000k 90 19 22 118 12 129 l130-5090001400001 5700k 90 19 22 118 12 129 l130-5790001400001 6500k 90 19 21 113 11 118 l130-6590001400001 notes for table 1: 1. correlated color temperature is hot targeted at t j =65c. 2. lumileds maintains a tolerance of 2 on cri and 6.5% on luminous fux measurements. 3. typical cri is approximately 2 points higher than the minimum cri specifed, but this is not guaranteed. 4. for 90cri products, r950. optical characteristics table 2 optical characteristics for luxeon 3014 at 60ma, t j =25c part number typical total included angle [1] typical viewing angle [2] l130-xxxx001400001 140 116 notes for table 2: 1. total angle at which 90% of total luminous fux is captured. 2. viewing angle is the of axis angle from the led centerline where the luminous intensity is ? of the peak value. ds208-l luxeon 3014 (legacy) product datasheet 20170216 ?2017 lumileds holding b.v. all rights reserved. 4 electrical and thermal characteristics table 3 electrical and thermal characteristics for luxeon 3014 at 60ma, t j =25oc part number forward voltage [1] (v) typical temperature coefficient of forward voltage ( m v/c) [2] typical thermal resistancejunction to solder pad (c/w) minimum typical maximum l130-xxxx001400001 2.8 3.1 3.3 -2.0 to -4.0 35 notes for table 3: 1. lumileds maintains a tolerance of 0.1v on forward voltage measurements. 2. measured between 25c and 85c. absolute maximum ratings table 4 absolute maximum ratings for luxeon 3014 parameter maximum performance dc forward current [1,2] 120ma peak pulsed forward current [1,3] 150ma led junction temperature [1] (dc & pulse) 115c esd sensitivity (ansi/esda/jedec js-001-2012) class 2 operating case temperature [1] -40c to 105c led storage temperature -40c to 100c soldering temperature jedec 020d 260c allowable refow cycles 3 reverse voltage (v reverse ) -5v notes for table 4: 1. proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature. 2. residual periodic variations due to power conversion from alternating current (ac) to direct current (dc), also called ripple, are acceptable if the following conditions are met: C the frequency of the ripple current is 100hz or higher C the average current for each cycle does not exceed the maximum allowable dc forward current C the maximum amplitude of the ripple does not exceed 15% of the maximum allowable dc forward current 3. at 10% duty cycle with pulse width of 10ms. ds208-l luxeon 3014 (legacy) product datasheet 20170216 ?2017 lumileds holding b.v. all rights reserved. 5 characteristic curves spectral power distribution characteristics figure 1a. typical normalized power vs. wavelength for l130-xx70001400001 at 60ma, t j =25oc figure 1b. typical normalized power vs. wavelength for l130-xx80001400001 at 60ma, t j =25oc ds208-l luxeon 3014 (legacy) product datasheet 20170216 ?2017 lumileds holding b.v. all rights reserved. 6 light output characteristics figure 1c. typical normalized power vs. wavelength for l130-xx90001400001 at 60ma, t j =25oc figure 2a. typical normalized light output vs. junction temperature for l130-xxxx001400001 at 60ma ds208-l luxeon 3014 (legacy) product datasheet 20170216 ?2017 lumileds holding b.v. all rights reserved. 7 forward current characteristics figure 2b. typical normalized light output vs. forward current for l130-xxxx001400001 at t j =25oc figure 3. typical forward current vs. forward voltage for l130-xxxx001400001 at t j =25oc ds208-l luxeon 3014 (legacy) product datasheet 20170216 ?2017 lumileds holding b.v. all rights reserved. 8 radiation pattern characteristics figure 4. typical radiation pattern for l130-xxxx001400001 at 60ma, t j =25oc figure 5. typical polar radiation pattern for l130-xxxx001400001 at 60ma, t j =25oc ds208-l luxeon 3014 (legacy) product datasheet 20170216 ?2017 lumileds holding b.v. all rights reserved. 9 product bin and labeling defnitions decoding product bin labeling in the manufacturing of semiconductor products, there are variations in performance around the average values given in the whfklfdogdwdvkhhw)ruwklvuhdvr/xplohgvelv/(frpsrhwviruoxplrxv5x[ruudglrphwulfsrzhufrorusrlwshdnru dominant wavelength and forward voltage. luxeon 3014 leds are labeled using a 4-digit alphanumeric cat code following the format below: a b c d a gldoxplrx5xeldpo roxp) roxp b c C designates color bin (example: 7d, 7e, 7f, 7g, 7h, 7j, 7k, 7l, 7m for 3000k parts) d C designates forward voltage bin (example: t=2.80v to 2.90v, w=3.00v to 3.10v) therefore, a luxeon 3014 with a lumen range of 10.0 to 11.5, color bin of 7d and a forward voltage range of 2.80v to 2.90v has the following cat code: b 7 d t luminous flux bins table 5 lists the standard luminous ux bins for leon 3014 emitters although several bins are outlined, product availability in a particular bin varies by production run and by product performance. not all bins are available in all ccts. table 5. luminous fux bin defnitions for luxeon 3014 at 60ma, t j =25c bin luminous flux [1] ( lm ) minimum maximum a 8.5 10.0 b 10.0 11.5 c 11.5 13.0 d 13.0 15.0 e 15.0 17.0 f 17.0 19.0 g 19.0 21.0 h 21.0 24.0 j 24.0 28.0 k 28.0 32.0 notes for table 5: 1. /xplohgvpdlwdlvdwrohudfhrisroxplrxv5x[phdvxuhphwv ds208-l luxeon 3014 (legacy) product datasheet 20170216 ?2017 lumileds holding b.v. all rights reserved. 10 table 6a. 3- and 5-step macadam ellipse color bin defnitions for l130-22xx001400001 at 60ma, hot-color targeted at t j =65c nominal cct color space center point (cx, cy) major axis, a minor axis, b ellipse rotation angle, 2200k single 3-step macadam ellipse (0.5037, 0.4142) 0.0072 0.0042 51.0 2200k single 5-step macadam ellipse (0.5037, 0.4142) 0.0120 0.0070 51.0 1rwhviru7deohe 1. lumileds maintains a tolerance of 0.005 on x and y coordinates in the cie 1931 color space. &roru%lh4lwlrv figure 6. 3-, 4- and 5-step macadam ellipse illustration for table 6. figure 7a. color bin structure for luxeon 3014 2200k, hot-color targeted at t j =65c ds208-l luxeon 3014 (legacy) product datasheet 20170216 ?2017 lumileds holding b.v. all rights reserved. 11 table 6c. 3- and 5-step macadam ellipse color bin defnitions for l130-27xx001400001 at 60ma, hot-color targeted at t j = 65c nominal cct color space center point (cx, cy) major axis, a minor axis, b ellipse rotation angle, 2700k single 3-step macadam ellipse (0.4578, 0.4101) 0.00810 0.00420 53.70 2700k single 5-step macadam ellipse (0.4578, 0.4101) 0.01350 0.00700 53.70 1rwhviru7deohf 1. lumileds maintains a tolerance of 0.005 on x and y coordinates in the cie 1931 color space. 0. 37 0 0. 38 0 0. 39 0 0. 40 0 0. 41 0 0. 42 0 0. 43 0 0. 44 0 0. 45 0 0. 43 0 0. 43 5 0. 44 0 0. 44 5 0. 45 0 0. 45 5 0. 46 0 0. 46 5 0. 47 0 0. 47 5 0. 48 0 0. 48 5 0. 49 0 y x 8j 8k 8f 8h 8m 2580 2870k 8l 8g 8d 8e figure 7c. color bin structure for luxeon 3014 2700k, hot-color targeted at t j =65c table 6b. 3- and 5-step macadam ellipse color bin defnitions for l130-25xx001400001 at 60ma, hot-color targeted at t j =65c nominal cct color space center point (cx, cy) major axis, a minor axis, b ellipse rotation angle, 2500k single 3-step macadam ellipse (0.4753, 0.4127) 0.0075 0.0042 53.0 2500k single 5-step macadam ellipse (0.4753, 0.4127) 0.0125 0.0070 53.0 1rwhviru7deohe 1. lumileds maintains a tolerance of 0.005 on x and y coordinates in the cie 1931 color space. figure 7b. color bin structure for luxeon 3014 2500k, hot-color targeted at t j =65c ds208-l luxeon 3014 (legacy) product datasheet 20170216 ?2017 lumileds holding b.v. all rights reserved. 12 table 6e. 3- and 5-step macadam ellipse color bin defnitions for l130-35xx001400001 at 60ma, hot-color targeted at t j = 65c nominal cct color space center point (cx, cy) major axis, a minor axis, b ellipse rotation angle, 3500k single 3-step macadam ellipse (0.4073, 0.3917) 0.00927 0.00414 54.00 3500k single 5-step macadam ellipse (0.4073, 0.3917) 0.01545 0.00690 54.00 1rwhviru7deohh 1. lumileds maintains a tolerance of 0.005 on x and y coordinates in the cie 1931 color space. 0.360 0.370 0.380 0.390 0.400 0.410 0.420 0.430 0.380 0.385 0.390 0.395 0.400 0.405 0.410 0.415 0.420 0.425 0.430 0.435 0.440 y x 3750k 6j 6l 6k 6e 6d 6m 3250k 6f 6g 6h figure 7e. color bin structure for luxeon 3014 3500k, hot-color targeted at t j =65c table 6d. 3- and 5-step macadam ellipse color bin defnitions for l130-30xx001400001 at 60ma, hot-color targeted at t j = 65c nominal cct color space center point (cx, cy) major axis, a minor axis, b ellipse rotation angle, 3000k single 3-step macadam ellipse (0.4338, 0.4030) 0.00834 0.00408 53.22 3000k single 5-step macadam ellipse (0.4338, 0.4030) 0.01390 0.00680 53.22 1rwhviru7deohg 1. lumileds maintains a tolerance of 0.005 on x and y coordinates in the cie 1931 color space. 0.365 0.375 0.385 0.395 0.405 0.415 0.425 0.435 0.445 0.405 0.410 0.415 0.420 0.425 0.430 0.435 0.440 0.445 0.450 0.455 0.460 0.465 y x 7j 7l 7k 7d 7h 7m 2870k 3200k 7e 7f 7g figure 7d. color bin structure for luxeon 3014 3000k, hot-color targeted at t j =65c ds208-l luxeon 3014 (legacy) product datasheet 20170216 ?2017 lumileds holding b.v. all rights reserved. 13 table 6g. 3- and 5-step macadam ellipse color bin defnitions for l130-50xx001400001 at 60ma, hot-color targeted at t j = 65c nominal cct color space center point (cx, cy) major axis, a minor axis, b ellipse rotation angle, 5000k single 3-step macadam ellipse (0.3447, 0.3553) 0.00822 0.00354 59.62 5000k single 5-step macadam ellipse (0.3447, 0.3553) 0.01370 0.00590 59.62 1rwhviru7deohj 1. lumileds maintains a tolerance of 0.005 on x and y coordinates in the cie 1931 color space. 0. 32 0 0. 33 0 0. 34 0 0. 35 0 0. 36 0 0. 37 0 0. 38 0 0. 39 0 0. 32 5 0. 33 0 0. 33 5 0. 34 0 0. 34 5 0. 35 0 0. 35 5 0. 36 0 0. 36 5 y x 5250k 3e 3l 3f 3d 3j 3h 4750k 3k 3m 3g figure 7g. color bin structure for luxeon 3014 5000k, hot-color targeted at t j =65c table 6f. 3- and 5-step macadam ellipse color bin defnitions for l130-40xx001400001 at 60ma, hot-color targeted at t j = 65c nominal cct color space center point (cx, cy) major axis, a minor axis, b ellipse rotation angle, 4000k single 3-step macadam ellipse (0.3818, 0.3797) 0.00939 0.00402 53.72 4000k single 5-step macadam ellipse (0.3818, 0.3797) 0.01565 0.00670 53.72 1rwhviru7deohi 1. lumileds maintains a tolerance of 0.005 on x and y coordinates in the cie 1931 color space. 0. 34 0 0. 35 0 0. 36 0 0. 37 0 0. 38 0 0. 39 0 0. 40 0 0. 41 0 0. 42 0 0. 36 0 0. 36 5 0. 37 0 0. 37 5 0. 38 0 0. 38 5 0. 39 0 0. 39 5 0. 40 0 0. 40 5 0. 41 0 y x 3750k 4250k 5k 5l 5e 5d 5m 5j 5f 5h 5g figure 7f. color bin structure for luxeon 3014 4000k, hot-color targeted at t j =65c ds208-l luxeon 3014 (legacy) product datasheet 20170216 ?2017 lumileds holding b.v. all rights reserved. 14 table 6i. 3- and 5-step macadam ellipse color bin defnitions for l130-65xx001400001 at 60ma, hot-color targeted at t j = 65c nominal cct color space center point (cx, cy) major axis, a minor axis, b ellipse rotation angle, 6500k single 3-step macadam ellipse (0.3123, 0.3282) 0.00669 0.00285 58.57 6500k single 5-step macadam ellipse (0.3123, 0.3282) 0.01115 0.00475 58.57 1rwhviru7deohl 1. lumileds maintains a tolerance of 0.005 on x and y coordinates in the cie 1931 color space. 0.295 0.305 0.315 0.325 0.335 0.345 0.355 0.365 0.290 0.295 0.300 0.305 0.310 0.315 0.320 0.325 0.330 0.335 y x 7000k 1j 1l 1k 1e 1g 1m 6000k 1f 1d 1h figure 7i. color bin structure for luxeon 3014 6500k, hot-color targeted at t j =65c 0. 31 0 0. 32 0 0. 33 0 0. 34 0 0. 35 0 0. 36 0 0. 37 0 0. 31 0 0. 31 5 0. 32 0 0. 32 5 0. 33 0 0. 33 5 0. 34 0 0. 34 5 0. 35 0 y x 6000k 2e 2l 2f 2d 2j 2m 5250k 2k 2h 2g figure 7h. color bin structure for luxeon 3014 5700k, hot-color targeted at t j =65c table 6h. 3- and 5-step macadam ellipse color bin defnitions for l130-57xx001400001 at 60ma, hot-color targeted at t j = 65c nominal cct color space center point (cx, cy) major axis, a minor axis, b ellipse rotation angle, 5700k single 3-step macadam ellipse (0.3287, 0.3417) 0.00746 0.00320 59.09 5700k single 5-step macadam ellipse (0.3287, 0.3417) 0.01243 0.00533 59.09 1rwhviru7deohk 1. lumileds maintains a tolerance of 0.005 on x and y coordinates in the cie 1931 color space. ds208-l luxeon 3014 (legacy) product datasheet 20170216 ?2017 lumileds holding b.v. all rights reserved. 15 table 6j. 4-step macadam ellipse color bin defnitions for l130-80xx01400001 at 60ma, hot-color targeted at t j = 65c nominal cct color space center point (cx, cy) major axis, a minor axis, b ellipse rotation angle, 8000k single 4-step macadam ellipse (0.2966, 0.3126) 0.00844 0.00334 58.64 1rwhviru7deohm 1. lumileds maintains a tolerance of 0.005 on x and y coordinates in the cie 1931 color space. table 6k. 4-step macadam ellipse color bin defnitions for l130-10xx01400001 at 60ma, hot-color targeted at t j = 65c nominal cct color space center point (cx, cy) major axis, a minor axis, b ellipse rotation angle, 10000k single 4-step macadam ellipse (0.2720, 0.2860) 0.00877 0.00332 63.28 1rwhviru7deohn 1. lumileds maintains a tolerance of 0.005 on x and y coordinates in the cie 1931 color space. figure 7j. color bin structure for luxeon 3014 8000k, hot-color targeted at t j =65c figure 7k. color bin structure for luxeon 3014 10000k, hot-color targeted at t j =65c ds208-l luxeon 3014 (legacy) product datasheet 20170216 ?2017 lumileds holding b.v. all rights reserved. 16 forward voltage bins table 7. forward voltage bin defnitions for luxeon 3014 at 60ma, t j =25c bin forward voltage [1] (v) minimum maximum t 2.80 2.90 v 2.90 3.00 w 3.00 3.10 x 3.10 3.20 y 3.20 3.30 z 3.30 3.40 notes for table 7: 1. lumileds maintains a tolerance of 0.1v on forward voltage measurements. mechanical dimensions notes for figure 8: 1. drawings are not to scale. 2. all dimensions are in millimeters. figure 8 mechanical dimensions for luxeon 3014 1 , 1 5 2 , 50 1 , 4 2 , 9 0 , 7 1 ,6 0 , 7 0 0 , 75 0 , 3 0 0 , 7 5 0 , 0 8 3 , 1 m a x 3 , 2 m a x ds208-l luxeon 3014 (legacy) product datasheet 20170216 ?2017 lumileds holding b.v. all rights reserved. 17 refow soldering guidelines table 8. refow profle characteristics for luxeon 3014. profile feature lead-free assembly preheat minimum temperature (t smin ) 150c preheat maximum temperature (t smax ) 200c preheat time (t smin to t smax ) 60 to 120 seconds ramp-up rate (t l to t p ) 3c / second maximum liquidus temperature (t l ) 217c time maintained above temperature t l (t l ) 60 to 150 seconds peak / classifcation temperature (t p ) 260c time within 5c of actual temperature (t p ) 20 to 40 seconds ramp-down rate (t p to t l ) 6c / second maximum time 25c to peak temperature 8 minutes maximum -((&0rlvwxuh6hvlwlylw table 9 moisture sensitivity levels for luxeon 3014 level floor life soak requirements standard time conditions time conditions 3 168 hours 30c / 60% rh 192 hours +5 / -0 30c / 60% rh t p t l 25 time 25oc to peak jedec j-std-020d critical zone t l to t p t l t p ramp-up ramp-down temperature time t s preheat area t smax t smin figure 9. visualization of the acceptable refow temperature profle as specifed in table 8. ds208-l luxeon 3014 (legacy) product datasheet 20170216 ?2017 lumileds holding b.v. all rights reserved. 18 packaging and labeling information there are two labeling formats used on the reel, moisture barrier bag (mbb) and shipment box. either format a or format b is used throughout all the packaging steps. lumileds uses code 128 barcode font on all the labels. pocket tape notes for figure 11: 1. drawings are not to scale. 2. all dimensions are in millimeters. solder pad design notes for figure 10: 1. drawings are not to scale. 2. all dimensions are in millimeters. figure 10 recommended pcb solder pad layout for luxeon 3014 figure 11 pocket tape dimensions for luxeon 3014 solder mask stencil top copper 0.69 0.79 1.61 0.60 0.80 0.70 0.72 0.62 package geometric center 1.51 0.11 0.36 ds208-l luxeon 3014 (legacy) product datasheet 20170216 ?2017 lumileds holding b.v. all rights reserved. 19 reel notes for figure 12: 1. drawings are not to scale. 2. all dimensions are in millimeters. notes for figure 13a and figure 13b reel label descriptions for customer use: qr code and all other feld labels not described are for lumileds internal use only. 1. number of led emitters in a reel. 2. lumileds part number. 3. product category code. 4. unique production lot identifcation number. first six numbers refer to manufacturing date code in yymmdd format. this number is required for traceability purpose. 5. country code of origin of manufacturing of parts. e.g. my for malaysia, cn for china according to iso 3166-1 alpha-2 document. 6. lumileds product name. lumileds part number is provided in mbb label format b #2 as shown in figure 25c. figure 12 reel dimensions for luxeon 3014 figure 13a: example of reel label format a figure 13b example of reel label format b ds208-l luxeon 3014 (legacy) product datasheet 20170216 ?2017 lumileds holding b.v. all rights reserved. 20 moisture barrier bag (mbb) notes for figure 14: 1. drawings are not to scale. there are two mbb labels attached (#1 and #2). the peeled of label (figure 28) must be detached and afxed to the reel upon opening of the mbb package. notes for figure 15a mbb label descriptions for customer use: qr code and all other feld labels not described are for lumileds internal use only. 1. number of led emitters in a reel. 2. lumileds part number. 3. customer part number for custom requests only. 4. led test date in yyww format. 5. kitting information for custom request only. 6. unique production lot identifcation number. first six numbers refer to manufacturing date code in yymmdd format. this number is required for traceability purpose. 7. product category code. 8. date in which mbb was sealed in yyyymmdd format. figure 14 illustration of typical moisture barrier bag (mbb) packaging of a luxeon emitter reel mbb consists of humidity indicator fdugglffded0odeodg(pluuo70dfndldluldogu((67 figure 15a example of mbb label format a ds208-l luxeon 3014 (legacy) product datasheet 20170216 ?2017 lumileds holding b.v. all rights reserved. 21 notes for figure 15b and figure 15c mbb label descriptions for customer use: qr code and all other feld labels not described are for lumileds internal use only. 1. number of led emitters in a reel. 2. lumileds product name. 3. led test date in yyww format. 4. unique production lot identifcation number. first six numbers refer to manufacturing date code in yymmdd format. this number is required for traceability purpose. 5. product category code. 6. date in which mbb was sealed in yyyymmdd format. 7. lumileds part number. 8. customer part number for custom requests only. 9. kitting information for custom request only. figure 15b example of mbb label format b #1 figure 15c example of mbb label format b #2 ds208-l luxeon 3014 (legacy) product datasheet 20170216 ?2017 lumileds holding b.v. all rights reserved. 22 shipment box notes for figure 16: 1. drawings are not to scale. notes for figure 17a shipment box label descriptions for customer use: all other feld labels not described are for lumileds internal use only. 1. lumileds part number. 2. customer part number for custom requests only. 3. maximum of 10 reels printed per label. for example, if there are 21 reels in a shipment box, there will be 3 labels printed. figure 16 illustration of mbbs packing into a shipment box figure 17a example of shipment box label format a ds208-l luxeon 3014 (legacy) product datasheet 20170216 ?2017 lumileds holding b.v. all rights reserved. 23 notes for figure 17b shipment box label descriptions for customer use: all other feld labels not described are for lumileds internal use only. 1. lumileds part number. 2. customer part number for custom requests only. 3. total number of led emitters in a shipment box. 4. maximum of 10 reels printed per label. for example, if there are 21 reels in a shipment box, there will be 3 labels printed. 5. lumileds product name. figure 17b example of shipment box label format b ?2017 lumileds holding b.v. all rights reserved. luxeon is a registered trademark of the lumileds holding b.v. in the united states and other countries. lumileds.com about lumileds lumileds is the global leader in light engine technology. the company develops, manufactures and distributes groundbreaking leds and automotive lighting products that shatter the status quo and help customers gain and maintain a competitive edge. with a rich history of industry frsts, lumileds is uniquely positioned to deliver lighting advancements well into the future by maintaining an unwavering focus on quality, innovation and reliability. to learn more about our portfolio of light engines, visit lumileds.com . ds208-l luxeon 3014 (legacy) product datasheet 20170216 neither lumileds holding b.v. nor its afliates shall be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. although lumileds holding b.v. and/or its afliates have attempted to provide the most accurate information and data, the materials and services information and data are provided as is, and neither lumileds holding b.v. nor its afliates warrants or guarantees the contents and correctness of the provided information and data. lumileds holding b.v. and its afliates reserve the right to make changes without notice. you as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data. |
Price & Availability of L130-2280001400001 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |