View EALP05RDLBA1_9063539.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

lifecyclephase: revision : 2 expired period: forever release date:2015-07-01 19:06:47.0 1 copyright ? 2010, everlight all rights reserved. release date :june. 29, 2015. issue no: dle-0007757_rev.2 www.everlight.com lamp EALP05RDLBA1 features ? popular t-1 3/4 round package. ? choice of various viewing angles. ? available on tape and reel. ? reliable and robust. ? the product itself will remain within rohs compliant version . ? compliance with eu reach ? compliance halogen free. (br <900 ppm, cl<900 ppm, br+cl <1500 ppm) descriptions ? the series is specially designed for applications requiring higher brightness. ? the led lamps are available with different colors, intensities, epoxy colors, etc. applications ? color graphic signs ? message boards ? variable message signs (vms) ? commercial outdoor advertising
lifecyclephase: revision : 2 expired period: forever release date:2015-07-01 19:06:47.0 datasheet lamp EALP05RDLBA1 2 copyright ? 2010, everlight all rights reserved. release date : june. 29, 2015. issue no: dle-0007757_rev.2 www.everlight.com device selection guide chip materials emitted color resin color ingan blue water clear absolute maximum ratings (ta=25 )
parameter symbol rating unit reverse voltage v r 5 v forward current i f 30 ma peak forward current (duty 1/10 @1khz) i fp 100 ma power dissipation pd 120 mw operating temperature topr -40 ~ +85
storage temperature tstg -40 ~ +100
soldering temperature tsol 260 for 5 sec.
electro -optical characteristics (ta=25 )
parameter symbol min. typ. max. unit condition radiometric intensity iv 1800 2850 4500 mcd i f =20ma viewing angle 2 1/2 -- 30 -- deg i f =20ma peak wavelength p -- 468 -- nm i f =20ma dominant wavelength d 465 470 475 nm i f =20ma spectrum radiation bandwidth ? -- 26 -- nm i f =20ma forward voltage v f 2.8 -- 3.6 v i f =20ma reverse current i r -- -- 50 a v r =5v
lifecyclephase: revision : 2 expired period: forever release date:2015-07-01 19:06:47.0 datasheet lamp EALP05RDLBA1 3 copyright ? 2010, everlight all rights reserved. release date : june. 29, 2015. issue no: dle-0007757_rev.2 www.everlight.com bin range of radiometric intensity bin code min. max. unit condition m 1800 2250 mcd i f =20ma n 2250 2850 p 2850 3600 q 3600 4500 note: measurement uncertainty of radiometric intensity: 10% bin range of dominant wavelength bin code min. max. unit condition 1 465 470 nm i f =20ma 2 470 475 note: measurement uncertainty of dominant wavelength 1.0nm bin range of forward voltage bin code min. max. unit condition 0 2.8 3.0 v i f =20ma 1 3.0 3.2 2 3.2 3.4 3 3.4 3.6 note: tolerance of forward voltage: 0.1v
lifecyclephase: revision : 2 expired period: forever release date:2015-07-01 19:06:47.0 datasheet lamp EALP05RDLBA1 4 copyright ? 2010, everlight all rights reserved. release date : june. 29, 2015. issue no: dle-0007757_rev.2 www.everlight.com 350 400 450 500 550 600 0.0 0.2 0.4 0.6 0.8 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 0 5 10 15 20 25 0 5 10 15 20 25 30 0.0 0.5 1.0 1.5 0 20 40 60 80 100 0 10 20 30 40 typical electro-optical characteristics curves relative intensity vs. wavelength (ta=25 )
directivity (ta=25 )
r e l a t i v e i n t e n s i t y ( a . u . ) r a d i a t i o n a n g l e wavelength (nm) relative intensity (a.u.) forward current vs. forward voltage (ta=25 )
relative intensity vs. forward current (ta=25 )
f o r w a r d c u r r e n t ( m a ) r e l a t i v e i n t e n s i t y ( a . u . ) forward voltage (v) forward current (ma) relative intensity vs. ambient temp. forward current vs. ambient temp. r e l a t i v e i n t e n s i t y ( a . u . ) f o r w a r d c u r r e n t ( m a ) ambient temperature ta(
) ambient temperature ta(
) 25 30 35 40 45 50 55 60 65 70 0.0 0.5 1.0 1.5 2.0
lifecyclephase: revision : 2 expired period: forever release date:2015-07-01 19:06:47.0 datasheet lamp EALP05RDLBA1 5 copyright ? 2010, everlight all rights reserved. release date : june. 29, 2015. issue no: dle-0007757_rev.2 www.everlight.com p ackage dimension 1 2 cathode anode 1 2 note: B other dimensions are in millimeters, tolerance is 0.25mm except being specified. B protruded resin under flange is 1.5mm max led.
lifecyclephase: revision : 2 expired period: forever release date:2015-07-01 19:06:47.0 datasheet lamp EALP05RDLBA1 6 copyright ? 2010, everlight all rights reserved. release date : june. 29, 2015. issue no: dle-0007757_rev.2 www.everlight.com 1c &- &$53 045"5*$ &-&$53 0/"(/&5 *$ ."(/&5*$03 3"%*0"$5*7&3&-%4 boujtubujdgps label moisture resista nt packing materials label explanation ? cpn: customer?s production number ? p/n : production number ? qty: packing quantity ? cat: ranks of luminous intensity ? hue: color rank ? ref: forward voltage ? lot no: lot number packing specification anti-electrostatic bag inner carton outside carton ? packing quantity 1. min 200pcs to max 500 pcs/1 bag, 5 bags/1 inner carton. 2. 10 inner cartons/1 outside carton
lifecyclephase: revision : 2 expired period: forever release date:2015-07-01 19:06:47.0 datasheet lamp EALP05RDLBA1 7 copyright ? 2010, everlight all rights reserved. release date : june. 29, 2015. issue no: dle-0007757_rev.2 www.everlight.com prehead laminar wave fluxing notes 1. lead forming ? during lead formation, the leads should be bent at a point at least 3mm from the base of the epoxy bulb. ? lead forming should be done before soldering. ? avoid stressing the led package during leads forming. the stress to the base may damage the led?s characteristics or it may break the leds. ? cut the led lead frames at room temperature. cutting the lead frames at high temperatures may cause failure of the leds. ? when mounting the leds onto a pcb, the pcb holes must be aligned exactly with the lead position of the led. if the leds are mounted with stress at the leads, it causes deterioration of the epoxy resin and this will degrade the leds. 2. storage ? the leds should be stored at 30c or less and 70%rh or less after being shipped from everlight americas and the storage life limits are 3 months. if the leds are stored for 3 months or more, they can be stored for a year in a sealed container with a nitrogen atmosphere and moisture absorbent material. ? please avoid rapid transitions in ambient temperature, especially, in high humidity environments where condensation can occur. 3. soldering ? careful attention should be paid during soldering. when soldering, leave more then 3mm from solder joint to epoxy bulb, and soldering beyond the base of the tie bar is recommended. ? recommended soldering conditions: hand soldering dip soldering temp. at tip of iron 300
max. (30w max.) preheat temp. 100
max. (60 sec max.) soldering time 3 sec max. bath temp. & time 260 max., 5 sec max distance 3mm min.(from solder joint to epoxy bulb) distance 3mm min. (from solder joint to epoxy bulb) ? recommended soldering profile preheat
lifecyclephase: revision : 2 expired period: forever release date:2015-07-01 19:06:47.0 datasheet lamp EALP05RDLBA1 8 copyright ? 2010, everlight all rights reserved. release date : june. 29, 2015. issue no: dle-0007757_rev.2 www.everlight.com ? avoiding applying any stress to the lead frame while the leds are at high temperature particularly when soldering. ? dip and hand soldering should not be done more than one time ? after soldering the leds, the epoxy bulb should be protected from mechanical shock or vibration until the leds return to room temperature. ? a rapid-rate process is not recommended for cooling the leds down from the peak temperature. ? although the recommended soldering conditions are specified in the above table, dip or hand soldering at the lowest possible temperature is desirable for the leds. ? wave soldering parameter must be set and maintain according to recommended temperature and dwell time in the solder wave. 4. cleaning ? when necessary, cleaning should occur only with isopropyl alcohol at room temperature for a duration of no more than one minute. dry at room temperature before use. ? do not clean the leds by the ultrasonic. when it is absolutely necessary, the influence of ultrasonic cleaning on the leds depends on factors such as ultrasonic power and the assembled condition. ultrasonic cleaning shall be pre-qualified to ensure this will not cause damage to the led 5. heat management ? heat management of leds must be taken into consideration during the design stage of led application. the current should be de-rated appropriately by referring to the de-rating curve found in each product specification. ? the temperature surrounding the led in the application should be controlled. please refer to the data sheet de-rating curve. 6. esd (electrostatic discharge) ? the products are sensitive to static electricity or surge voltage. esd can damage a die and its reliability. when handling the products, the following measures against electrostatic discharge are strongly recommended: eliminating the charge grounded wrist strap, esd footwear, clothes, and floors grounded workstation equipment and tools esd table/shelf mat made of conductive materials ? proper grounding is required for all devices, equipment, and machinery used in product assembly. surge protection should be considered when designing of commercial products. ? if tools or equipment contain insulating materials such as glass or plastic, the following measures against electrostatic discharge are strongly recommended: dissipating static charge with conductive materials preventing charge generation with moisture neutralizing the charge with ionizers 7. directions for use ? the leds should be operated with forward bias. the driving circuit must be designed so that the leds are not subjected to forward or reverse voltage while it is off. if reverse voltage is continuously applied to the leds, it may cause migration resulting in led damage. 8. other ? above specification may be changed without notice. everlight americas will reserve authority on material change for above specification. ? when using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. everlight americas assumes no responsibility for any damage resulting from use of the product
lifecyclephase: revision : 2 expired period: forever release date:2015-07-01 19:06:47.0 datasheet lamp EALP05RDLBA1 9 copyright ? 2010, everlight all rights reserved. release date : june. 29, 2015. issue no: dle-0007757_rev.2 www.everlight.com which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. ? these specification sheets include materials protected under copyright of everlight americas inc .please don?t reproduce or cause anyone to reproduce them without everlight americas's consent

▲Up To Search▲

Price & Availability of EALP05RDLBA1

	To Download EALP05RDLBA1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .