TFS309.doc version 1.5 13.07.2000 vi telefilter filter specification tfs 309 1/5 vi telefilter vectron international, inc. potsdamer stra?e 18 267 lowell road d 14 513 teltow / germany hudson, nh 03051 / usa tel: (+49) 3328 4784-52 / fax: (+49) 3328 4784-30 tel: (603) 598-0070 fax: (603) 598-0075 e-mail: tft@telefilter.com e-mail: vti@vtinh.com vi telefilter reserves the right to make changes to the product(s) and/or information contained herein without notice. no liab ility is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or infor mation. measurement condition ambient temperature: 23 c input power level: 0 dbm terminating impedances for input: 540 ohm // -1,7 pf for output: 540 ohm // -1,7 pf external coil: 116 nh characteristics remark: reference level for the relative attenuation a rel of the tfs 309 is the insertion loss. the insertion loss a e is defined as the insertion loss at the nominal frequency f n . the centre frequency f c is the arithmetic mean value of the upper and lower frequencies at the 3 db filter attenuation level relative to the insertion loss a e . the nominal frequency f n is fixed on 309,6 mhz without tolerance. the specified values have to be reached in operating temperature range. d a t a typ.value tolerance/limit insertion loss a e2,75db 2,1 ... 4,1 db (reference level) nominal frequency f n - 309,600 mhz centre frequency f c 309,62 mhz - 1 db bandwidth bw 270 khz - relative attenuation a rel f n 1,8 mhz ... f n 6 mhz 47 db min. 30 db f n 6 mhz ... f n 100 mhz 28...65 db min. 20 db vswr @ f n 1,2:1 min. 1,8 : 1 group delay gd @ f n 2,6 s max. 4,6 s input power -max.10dbm operating temperature range - 5 c ... + 80 c temperature coefficient of frequency tc ca. ? 0,036 ppm/k2 frequency inversion temperature + 25 c generated: checked / approved:
TFS309.doc version 1.5 13.07.2000 vi telefilter filter specification tfs 309 2/5 vi telefilter vectron international, inc. potsdamer stra?e 18 267 lowell road d 14 513 teltow / germany hudson, nh 03051 / usa tel: (+49) 3328 4784-52 / fax: (+49) 3328 4784-30 tel: (603) 598-0070 fax: (603) 598-0075 e-mail: tft@telefilter.com e-mail: vti@vtinh.com vi telefilter reserves the right to make changes to the product(s) and/or information contained herein without notice. no liab ility is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or infor mation. construction, pin configuration and 50 ? ? ? ? - matching network (all dimensions in mm) s 309 m24 date code 3 1 5 7 5.0 sq +0.15 -0.1 pin 1 output pin 2,6,7 ground pin 3 external coil pin 4,8 package ground pin 5 input 50 ohm test circuit 1 1 5 2, 4, 6, 7, 8 saw c1 l1 c2 l2 l3 3 50 ohm test circuit 2 1 5 2, 4,6,7,8 saw l1 c1 l2 c2 3 l3 datecode: year+week k 1998 l 1999 m 2000 ...
TFS309.doc version 1.5 13.07.2000 vi telefilter filter specification tfs 309 3/5 vi telefilter vectron international, inc. potsdamer stra?e 18 267 lowell road d 14 513 teltow / germany hudson, nh 03051 / usa tel: (+49) 3328 4784-52 / fax: (+49) 3328 4784-30 tel: (603) 598-0070 fax: (603) 598-0075 e-mail: tft@telefilter.com e-mail: vti@vtinh.com vi telefilter reserves the right to make changes to the product(s) and/or information contained herein without notice. no liab ility is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or infor mation. stability characteristics after the following tests the filter shall meet the whole specification: 1. shock: 500g, 18 ms, half sine wave, 3 sho cks each pl ane; din iec 68 t2 - 27 2. vibration: 10 hz to 500 hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans; din iec 68 t2 - 6 3. damp heat: 25 c to 55c / 95% r.h. / 10 cycles (cycle) din iec 68 - 2 ? 30 db 4. resistance to solder heat (reflow): max. 2 times reflow process; for temperature conditions refer to the attached "air reflow temperature conditions" on page 4; packing tape & reel: iec 286 - 3, with exception of value for n and minimum bending radius; tape type ii , embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: 3000 real of empty components at start: min 300 mm real of empty components at start including leader: min 500 mm trailer min 300 mm d o p o e f w p 1 embossed carrier tape cover tape g p 2 b o a o ct d 1 tape (all dimensions in mm) w : 12 0,3 po : 4 0,1 do : 1,5 + 0,1 e : 1,75 0,1 f : 5,5 0,05 g (min) : 0,75 p2 : 2 0,05 p1 : 8 0,1 d1(min) : 1,5 ao : 5,3 0,1 bo : 5,3 0,1 ct : 9,5 0,1 a c n w 1 w 2 reel (all dimensions in mm): a : 330 w1 : 12,4 + 0,2 w2 (max) : 18,4 n (min) : 50 c : 13 0,2 the minimum bending radius is 45 mm. the mounting surface of the filters faces the bottom side of the embossed carrier tape. the marking of the filters is able to read if the view is directed on the upper side of the carrier tape with the sprocket hole s on the right side of the tape.
TFS309.doc version 1.5 13.07.2000 vi telefilter filter specification tfs 309 4/5 vi telefilter vectron international, inc. potsdamer stra?e 18 267 lowell road d 14 513 teltow / germany hudson, nh 03051 / usa tel: (+49) 3328 4784-52 / fax: (+49) 3328 4784-30 tel: (603) 598-0070 fax: (603) 598-0075 e-mail: tft@telefilter.com e-mail: vti@vtinh.com vi telefilter reserves the right to make changes to the product(s) and/or information contained herein without notice. no liab ility is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or infor mation. air reflow temperature conditions 1st and 2nd air reflow profile name: pre-heating periods main-heating periods peak temperature temperature: 150 c - 170 c over 200 c 255 c 5 c time: 60 sec. - 90 sec. 20 sec. - 25 sec. chip-mount air reflow profile time / sec. temperature / c 0 20 40 60 80 100 120 140 160 180 200 220 240 260 0 20 40 60 80 100 120 140 160 180 200 220 240 table for temperature vs. time during the air reflow process tolerance of temperatures: 5 c time / sec. temperature / c time / sec. temperature / c 0 23 140 160 10 34 150 161 20 46 160 164 30 60 170 170 40 80 180 180 50 103 190 205 60 121 195 230 70 134 200 255 80 143 205 230 90 150 210 205 100 154 215 180 110 156 220 165 120 158 230 140 130 159 240 120
TFS309.doc version 1.5 13.07.2000 vi telefilter filter specification tfs 309 5/5 vi telefilter vectron international, inc. potsdamer stra?e 18 267 lowell road d 14 513 teltow / germany hudson, nh 03051 / usa tel: (+49) 3328 4784-52 / fax: (+49) 3328 4784-30 tel: (603) 598-0070 fax: (603) 598-0075 e-mail: tft@telefilter.com e-mail: vti@vtinh.com vi telefilter reserves the right to make changes to the product(s) and/or information contained herein without notice. no liab ility is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or infor mation. history version reason of changes name date 1.2 add preliminary values for termination impedance dr. wall 09.05.2000 add history modify monthly date code into weekly date code 1.3 correct tape and reel information dr. wall 15.06.2000 add limit values for package dimensions add final termination conditions add typical filter data add limits for insertion loss 1.4 add maximum input power dr. wall 28.06.2000 add reletive attenuation value for f n 6 mhz ... f n 100 mhz add group delay notice 1 db bandwidth instead of 3 db bandwidth increase window for insertion loss to two db 1.5 maximum input power changed to 10 dbm dr. wall 13.07.2000
|
