rev. a m151121 edr-8735auf1 zx75-12+ urj/rav 170201 page 1 of 1 50 ? 9 to 15 mhz zx75-12+ bandpass filter typical performance data at 25 o c bandpass filter electrical specifcations (t amb = 25 o c) typical frequency response outline drawing (hy1239) functional schematic frequency insertion loss vswr (mhz) (db) (:1) 0.3 100.39 1737.18 7.0 53.30 62.05 7.5 36.73 35.46 8.0 14.55 9.74 8.2 5.51 2.37 8.5 3.45 2.36 9.0 1.85 1.22 11.0 1.31 1.40 12.0 1.26 1.37 13.0 1.59 1.77 15.0 2.09 1.75 15.7 4.10 2.81 16.0 6.58 4.66 16.6 15.51 11.77 18.0 37.07 30.49 20.0 60.12 59.91 100.0 94.22 248.17 1000.0 67.12 23.49 3000.0 59.03 6.19 features ? high rejection ? sharp insertion loss roll off ? shielded case applications ? high rejection applications ? image rejection ? if signal processing ? receivers / transmitters ? test lab zx75-12+ insertion loss 0 20 40 60 80 100 120 0 1 10 100 1000 10000 frequency (mhz) insertion loss (db) zx75-12+ vswr 1 10 100 1000 10000 0 1 10 100 1000 10000 frequency (mhz) vswr maximum ratings operating temperature -40c to 85c storage temperature -55c to 100c rf power input 0.25 w at 25c a b c d e f 1.20 .75 .46 1.18 .04 .17 30.48 19.05 11.68 29.97 1.02 4.32 g h j k l m wt. 1.00 .50 .35 .18 .106 1.88 grams 25.40 12.70 8.89 4.57 2.69 47.75 35.0 coaxial outline dimensions ( ) inch mm f6 f4 f2 f1 f3 f5 40 20 3.5 attenuation (db) frequency (mhz) male female sma shown rf in rf out center passband stopbands (mhz) vswr (:1) freq. (mhz) (mhz) (loss < 3.5db) loss > 20db loss > 40db passband stopband fc f1 - f2 f3 f4 f5 f6 typ. max. typ. 12 9 - 15 7.5 18 7 20 - 3000 1.5 2.2 30 sma connectors model case input output female female ZX75-12-S+ hy1239 male female zx75-12m-s+ hy1238 note: * m dimension is 2.05 inch (52.07 mm) for hy1238 case style. permanent damage may occur if any of these limits are exceeded. notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com * +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
|
