page 1 of 5 the big deal product overview MPGA-122-75+ (rohs compliant) is an advanced wideband dual amplifer fabricated using e-phemt* technology and offers extremely high dynamic range over a broad frequency range and with low noise fgure and fat gain. in addition, the MPGA-122-75+ has excellent input and output return loss when used per suggested application circuit over a broad frequency range. it is enclosed in a 4x4mm, 24 lead mclp package for very good thermal performance. feature advantages broad band: 0.04 to 1.25 ghz usable to 1.5 ghz covers primary catv applications such as docsis 3.1 positive gain slope, 0.3 db compensates for increasing loss versus frequency of cables high ip3 versus dc power consumption: 51 dbm typical at 0.5 ghz the MPGA-122-75+ matches industry leading ip3 performance relative to device size and power consumption. the combination of the design and e-phempt structure pro - vides enhanced linearity over a broad frequency range as evidence in the ip3 being typically 14-19 db above the p 1db point. this feature makes this amplifer ideal for use in catv applications. high ip2, 68 dbm at 0.5 ghz suppresses second order product on wideband applications such as catv low noise figure, 2.8 db at 0.5 ghz low noise fgure performance in combination with the high output ip3 results in high dynamic range. excellent cso/ctb* cso, -80 dbc ctb, -83 dbc measured at channel 17 competitive performance at lower current and supply voltage. MPGA-122-75+ key features 75 ? 40 to 1250 mhz 4x4mm 24-lead, mclp package ? high ip3 ? positive gain slope ? 1w output power dual matched high dynamic range *108 channels fat, 40 dbmv/channel at output, 6 mhz channel spacing. monolithic amplifer notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com
page 2 of 5 simplifed schematic and pad description function pad number description (refer to figure 1) rf in, a1 1 rf input pad. this pad requires the use of an external dc blocking capacitor rf in, a2 6 rf input pad. this pad requires the use of an external dc blocking capacitor rf-out and dc-in, a1 18 rf output and bias pad. dc voltage is present on this pad; therefore a dc blocking capacitor is necessary for proper operation. an rf choke is needed to feed dc bias without loss of rf signal due to the bias connection, as shown in recommended ap - plication circuit, fig. 1 rf-out and dc-in, a2 13 rf output and bias pad. dc voltage is present on this pad; therefore a dc blocking capacitor is necessary for proper operation. an rf choke is needed to feed dc bias without loss of rf signal due to the bias connection, as shown in recommended ap - plication circuit, fig. 1 gnd paddle connections to ground. use via holes as shown in suggested layout for pcb design to reduce ground path inductance for best performance. n/c 2-5, 7,8 10- 12,14-17, 19-21 23-24 no connection. ground externally do not use 9,22 isolate on pcb trace 40-1250 mhz case style: dg1847 MPGA-122-75+ product features ? high ip3, 50 dbm typ. at 0.5 ghz ? gain, 15.1 db typ. at 0.5 ghz ? high pout, p1db 80 dbmv typ. at 0.5 ghz ? low noise figure, 2.9 db at 0.5 ghz ? usable over 40-1800 mhz rev. or m155838 MPGA-122-75+ rs/cp 170315 general description MPGA-122-75+ (rohs compliant) is an advanced wideband dual amplifer fabricated using e-phemt* technology and offers extremely high dynamic range over a broad frequency range and with low noise fgure and fat gain. in addition, the MPGA-122-75+ has excellent input and output return loss when used per suggested application circuit over a broad frequency range. it is enclosed in a 4x4mm, 24 lead mclp package for very good thermal performance. typical applications ? catv, docsis 3.1 ? gpon ? moca ? dbs dual matched high dynamic range *enhanced mode pseudomorhic high electron mobility transistor. monolithic amplifer notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com
page 3 of 5 MPGA-122-75+ 1. measured on mini-circuits characterization test board mb012. pcb material rogers 4350b. see characterization test circuit (fig. 1). 1a. measured on mini-circuit evaluation board tb-937+ (pcb material fr4) vdd=12v is applied to get 9v at dut (fig. 2) 2. output ip2 measured at sum frequency of the two tones (f means= f1+f2). 3. (current at 85c - current at -45c)/130 electrical specifcations 1 at 25c, 75 ? unless noted parameter condition (ghz) v dd =9v (note 1) v dd =8v (note 1) v dd =9v (note 1a) units min. typ. max. min. typ. max. typ. frequency range 0.04 1.25 0.04 1.25 0.04-1.25 ghz gain 0.04 15 14.9 15.0 db 0.5 15.1 15.1 15.1 0.86 13.8 15.3 16.9 15.3 15.3 1.25 15.3 15.3 15.0 1.5 15.1 15.0 14.5 input return loss 0.04 13.6 13.7 13.4 db 0.5 16.4 16.3 15.3 0.86 20.5 20.1 20.6 1.25 19.1 18.7 20.3 1.5 15.1 14.6 15.7 output return loss 0.04 16.8 16.7 16.7 db 0.5 13.7 13.6 13.4 0.86 16.4 16.3 17.1 1.25 17.5 17.0 15.3 1.5 12.6 12.2 9.7 reverse isolation 1.0 21.5 21.5 21.7 db output power @1db compression 0.04 30.1 (78.8) 29.1 (77.8) 30.2 (78.9) dbm (dbmv) 0.5 30.9 (79.6) 29.9 (78.7) 30.9 (79.7) 0.86 30.6 (79.4) 29.6 (78.3) 30.5 (79.2) 1.25 28.6 (77.4) 27.4 (76.2) 28.0 (76.7) 1.5 28.2 (76.4) 27.1 (75.9) 27.3 (76.0) output ip3 0.04 45.9 45.4 44.4 dbm 0.5 49.7 48.9 50.6 0.86 48.8 46.5 47.0 1.25 48.4 48.6 46.3 1.5 42.8 43.0 40.7 output ip2 2 0.04 75.7 73.7 76.2 dbm 0.5 68.9 69.4 69.2 0.86 68.8 66.8 67.1 1.25 72.5 70.6 66.2 1.5 55.3 53.1 50.1 noise fgure 0.04 2.9 2.8 2.8 db 0.5 2.9 2.8 2.9 0.86 3.2 3.2 3.2 1.25 3.6 3.5 3.6 1.5 3.9 3.9 4.1 supply operating voltage 9.0 8.0 9.0 v supply operating current (total) 391 487 343 392 ma device current variation vs temperature 3 9.4 29.4 a/c device current variation vs voltage 0.0506 0.0507 ma/mv thermal resistance, junction-to-ground lead 8.6 8.6 8.6 c/w parameter ratings operating temperature (ground lead) -40c to 85c storage temperature -65c to 150c operating current at 9.0v 464 ma power dissipation 8.5 w input power (cw) at 9v +28 dbm (5 minutes) +25 dbm (continuous) dc voltage on pad 13 & 18 12v absolute maximum ratings 6 6. permanent damage may occur if any of these limits are exceeded. electrical maximum ratings are not intended for continuous normal operation. dual matched monolithic e-phemt mmic amplifer notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com
page 4 of 5 MPGA-122-75+ fig 1 . block diagram of test circuit used for characterization. (dut tested on mini-circuits characterization test board mb012) gain, return loss, output power at 1db compression (p1 db) , output ip3 (oip3), output ip2 (oip2) and noise fgure measured using agilents n5242a pna-x microwave network analyzer. conditions: 1. gain and return loss: pin= -25dbm 2. output ip3 (oip3): two tones, spaced 1 mhz apart, 5 dbm/tone at output. 3. output ip2 (oip2): two tones, spaced 1 mhz apart, 5 dbm/tone at output. characterization and applicationtest circuit product marking mcl mpga22 marking may contain other features or characters for internal lot control component size value manufacturers p/n manufacturer dut -- --- MPGA-122-75+ mini-circuits c1 & c2 0402 220 pf grm1555c1h221ja01d murata c3 & c4 0402 220 pf grm1555c1h221ja01d murata c5 & c6 0402 0.01 f grm155r71e103ka01d murata c7 & c8 1210 10 f grm32er71h106ma2l murata l1, l2 0805 390 nh 0805cs-391xglc coilcraft t1 & t2 -- -- trs1-182-75+ mini-circuits application circuit 12v 9v 9v 12v 9v 9v fig 2 . block diagram of application circuit (dut soldered on tb-937+) due to 3v drop at the voltage regulator and reversed voltage protection circuit, v dd =12v is needed to get 9v at dut. dual matched monolithic e-phemt mmic amplifer notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com
page 5 of 5 MPGA-122-75+ msl test flow chart esd rating human body model (hbm): class 1a (pass 250v) in accordance with ansi/esd stm 5.1 - 2001 msl rating moisture sensitivity: msl1 in accordance with ipc/jedec j-std-020d performance data data table swept graphs s-parameter (s2p files) data set (.zip fle) case style dg1847 plastic package, exposed paddle lead fnish: matt-tin tape & reel f68 standard quantities available on reel 7 reels with 20, 50, 100, 200, 500 or 1k devices suggested layout for pcb design pl-500 evaluation board tb-937+ environmental ratings env08t1 additional detailed technical information additional information is available on our dash board. to access this information click here visual inspection electrical test sam analysis refow 3 cycles, 260c soak 85c/85rh 168 hours bake at 125c, 24 hours visual inspection electrical test sam analysis start finish additional notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp dual matched monolithic e-phemt mmic amplifer notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com
|
