dimensions scocxol family package dil 14 fast warm-up up to 54 mhz low current 20.20 15.24 1 7 8 14 0.46 0.8 7.8 6.35 10.7 12.52 7.62 5.35 package: all dimensions in mm typical description: this dil 14 package has been specially designed for the applications: - digital switching - telecom transmission - sonet / sdh / dwdm / fdm/36 / wimax - airbone equipments - battery operated systems - instrumentation - radio transceiver the ocxo are supplied on trays (50 pcs/tray). oven control quartz crystal oscillator fundamental mode frequency high shock and vibration resistance wide temperature range low aging customer specification on request ultra fast warm up ultra low power consumption swiss made quality electrical characteristics 25c frequency versus temperature a: 0 to +60c b: -20 to +70c c: -40 to +85c e: -55 to +85c f/f see table 1 (without air fow) frequency long term aging 1) long term aging 10 years long term aging 1 st year f/f < 2.5 0.3 ppm frequency control range vc 2.5 (see table 3) ppm supply voltage vdd 3.3 / 5 / 12 v input current idd see table 2 output signal hc-mos compatible symmetry at vdd/2 40 / 60 % rise & fall time (without load) 7 ns level "0" & "1" <0.4v> vcc-0.5 v start-up time t <5 ms load min / max 3/47 pf frequency stability versus load 10% f/f 10 ppb warm-up within 0.1 ppm at 25c vdd 3.3 5 12 v t 30 20 15 s stability versus vdd f/f < 0.1 ppm short term stability 0.1 to 30s 5e-11 typ at 1s ta u < 1 e-10 phase noise typical at 10 mhz static conditions bw = 1hz 10hz 100hz 1 khz 10 khz 3.3 / 5v 12v dbc/ hz -100 -130 -140 -145 -90 -120 -130 -135 rohscompliant: pin out pin 1 = voltage control pin 7 = gnd pin 8 = fout pin 14 = vdd 1) < 1 e-9 / day after 30 days operating
micro crystal ag tel. +41 32 655 82 82 mhlestrasse 14 fax +41 32 655 80 90 ch-2540 grenchen sales@microcrystal.com switzerland www.microcrystal.com t able 2: idd t able 1: vdd = 5v t able 1: vdd = 12v t able 3: operating temperature range vdd = 3.3v 0.15v version standard version high stability a = 0 to +60c 75 ppb 50 ppb b = -20 to +70c 150 ppb 75 ppb c = -40 to +85c 250 ppb 100 ppb e = -55 to +85c 400 ppb 200 ppb operating temperature range vdd = 12v 0.5v version standard version high stability a = 0 to +60c < 50 ppb 25 ppb b = -20 to +70c 100 ppb 50 ppb c = -40 to +85c 150 ppb 100 ppb e = -55 to +85c 400 ppb 200 ppb operating temperature range vdd = 5v 0.2v version standard version high stability a = 0 to +60c 50 ppb 25 ppb b = -20 to +70c 100 ppb 50 ppb c = -40 to +85c 150 ppb 100 ppb e = -55 to +85c 400 ppb 200 ppb t able 1: vdd = 3.3v temperature vdd = 3.3v vdd = 5v vdd = 12v 25c -20c 80 ma 120 ma 50 ma 80 ma 25 ma 40 ma start-up current at 25c duration 350ma 10s 300ma 10s 250ma 10s frequency control adjustment response slope positive vdd = 3.3v vdd = 5v vdd = 12v voltage control input impedance > 47k? 0 to 3.3v 0.5 to 5v 0.5 to 5v resistor control r connect pin 1 to ground (input impedance > -4,7k?) 0 to 10k? 0 to 10k? 0 to 10k? no frequency control ya or yb pin 1 connect to gnd
version 15/02.2015 micro crystal ag tel. +41 32 655 82 82 mhlestrasse 14 fax +41 32 655 80 90 ch-2540 grenchen sales@microcrystal.com switzerland www.microcrystal.com environmental characteristics: storage temp. range -55 to +125c vibration resistance 10 to 2000hz / 20g shocks resistance 5000g / 0.3ms / ? sine terminations and processing: pin soldering +235c / 10s max +260c / 5s max package smd version option d1 or d2 see application note dil 14.4 pins gnd to case height = 8mm product description and ordering information: all specifications subject to change without notice. frequency ?mhz? 10 12.8 14.7456 16.384 20 25.6 26 32.768 40 52 54 other frequencies from 10 khz up to 54 mhz on request standard frequencies: w = vdd 3.3v v = vdd 5v blank = vdd 12v t = high stability blank = standard stability a = 0 to +60c b = -20 to +70c c = -40 to +85c e = -55 to +85c x = custom r1 = r = 0 to 10k? v3 = vc = 0 to 3.3v v5 = vc = 0.5 to 5v ya internal accuracy= 1ppm yb internal accuracy= 0.5ppm y = custom frequency customer spec n scocxol v t - c v5 20mhz xxx a unique part number will be generated for each product specifcation, i.e: 20xxxx-ea00 ( in esd plastic tray) please contact us.
|