part number: XZFAMYK10C surface mount display oct 11,2016 xdsb1633 v4x layout: maggie l. p. 1/4 features 0.4 inch digit height robust package low power consumption standard configuration: gray face w/ white segments standard package: 400pcs/ reel msl (moisture sensitivity level): 2a rohs compliant absolute maximum ratings (t a =25c) yellow (algainp) unit reverse voltage v r 5 v forward current i f 30 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 175 ma power dissipation p d 75 mw operating temperature t a 40 ~ +85 c storage temperature tstg 40 ~ +85 package schematics notes: 1. all dimensions are in millimeters (inches), tole rance is 0.25(0.01")unless otherwise noted. 2. specifications are subject to change without not ice. 3.the gap between the reflector and pcb shall not e xceed 0.25mm. part number emitting color emitting material wavelength cie1272007* nm p description min. typ. XZFAMYK10C yellow algainp 21000 5600* 45990 11990* 590* common cathode, rt.hand decimal. luminous intensity cie1272007* (i f =10ma) ucd yellow (algainp) unit forward voltage (typ.) (i f =10ma) v f 1.95 v forward voltage (max.) (i f =10ma) v f 2.5 v reverse current (max.) (v r =5v) i r 10 ua wavelength of peak emission cie1272007* (typ.) (i f =10ma) p 590* nm wavelength of dominant emission cie1272007* (typ.) (i f =10ma) d 590* nm spectral line full width at halfmaximum (typ.) (i f =10ma) 20 nm capacitance (typ.) (v f =0v, f=1mhz) c 20 pf operating characteristics (t a =25c) *luminous intensity value and wavelength are in ac cordance with cie1272007 standards. attention observe precautions for handling electrostatic discharge sensitive devices a relative humidity between 40% and 60% is recommen ded in esdprotected work areas to reduce static build up during assembly process (reference jedec/jesd625a and jedec/jstd 033)
part number: XZFAMYK10C surface mount display oct 11,2016 xdsb1633 v4x layout: maggie l. p. 2/4 yellow led is recommended for reflow soldering and soldering profile is shown below. yellow
part number: XZFAMYK10C surface mount display oct 11,2016 xdsb1633 v4x layout: maggie l. p. 3/4 recommended soldering pattern (units : mm; toleranc e: 0.15) tape specification (units : mm) reel dimension remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous f lux, or wavelength), the typical accuracy of the sorting process is as follo ws: 1. wavelength: +/1nm 2. luminous intensity / luminous flux: +/15% 3. forward voltage: +/0.1v note: accuracy may depend on the sorting parameters .
part number: XZFAMYK10C surface mount display oct 11,2016 xdsb1633 v4x layout: maggie l. p. 4/4 packing & label specifications terms of use 1. data presented in this document reflect statisti cal figures and should be treated as technical refe rence only. 2. contents within this document are subject to imp rovement and enhancement changes without notice. 3. the product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet. user accepts full risk and responsibility when operating the product(s) beyond their intended spec ifications. 4. the product(s) described in this document are in tended for electronic applications in which a perso ns life is not reliant upon the led. please consult with a sunled representative for specia l applications where the led may have a direct impa ct on a persons life. 5. the contents within this document may not be alt ered without prior consent by sunled. 6. additional technical notes are available at http://www.sunledusa.com/technicalnotes.asp
|
