page 1 www.citrelay.com phone - 763.535.2339 fax - 763.535.2194 speci? cations and availability subject to change without notic e. dimensions shown in mm. dimensions are shown for reference purp oses only. rohs compliant j104d 20.4 x 10.05 x 11.0 mm ? high sensitivity ? low cost ? conforms to fcc part 68 ? clearance more than 1.2mm between coil and contacts ? creepage more than 1.9mm between coil and contacts ? bifurcated contacts for high reliability coil data* general data* contact data* contact arrangement 2c = dpdt bifurcated contacts contact rating 2a @ 24vdc, resistive 1a @ 120vac, resistive contact material agni + au clad contact resistance 50 milliohms initial maximum switching power 48w, 120va maximum switching voltage 250vac, 100vdc maximum switching current 2a electrical life @ rated load 100k cycles, average mechanical life 10m cycles, average insulation resistance 100m min. @ 500vdc initial dielectric strength, coil to contact 1000v rms min. @ sea level initial contact to contact 500v rms min. @ sea level initial shock resistance 100m/s 2 for 11 ms vibration resistance 1.5mm double amplitude 10~40hz terminal (copper alloy) strength 5n operating temperature -40 o c to +85 o c storage temperature -40 o c to +85 o c solderability 260 o c for 5 s weight 5g features coil voltage vdc coil resistance +/- 10% pick up voltage vdc (max) 75% of rated voltage release voltage vdc (min) 10% of rated voltage coil power w operate time ms release time ms rated max .15w .20w .36w .45w 3 3.9 60 45 25 20 2.25 0.3 .15 .20 .36 .45 64 5 6.5 167 125 70 56 3.75 0.5 6 7.8 240 180 100 80 4.50 0.6 9 11.7 540 405 225 180 6.75 0.9 12 15.6 960 720 400 320 9.00 1.2 24 31.2 3840 2880 1600 1280 18.00 2.4 48 62.4 n/a 11520 6400 5100 36.00 4.8 e197851 * values can change due to the switching frequency, desired reliability levels, environmental conditions and in-rush load levels. it is recommended to test actual load conditions for the applica- tion. it is the user?s responsibility to determine the performance suitability for their speci c application. the use of any coil voltage less than the rated coil voltage may compromise the operation of the relay.
www.citrelay.com phone - 763.535.2339 fax - 763.535.2194 speci? cations and availability subject to change without notic e. dimensions shown in mm. dimensions are shown for reference purp oses only. j104d page 2 1. series j104d 2c 12vdc .45 s j104d 2. contact arrangement 2c = dpdt 3. coil voltage 3vdc 5vdc 6vdc 9vdc 12vdc 24vdc 48vdc **not available with .15w coil power 4. coil power .15 = .15w .20 = .20w .36 = .36w .45 = .45w 5. seal s = sealed (standard) ordering information bottom view schematic & pc layout dimensions units = mm 20.37 [.80] 9.97 [.39] 11.10 [.44] 11.42 [.45] 3.58 typ [.14] 7.62 [.30] 5.08 [.20] 5.08 [.20] 7.62 [.30] 1.30 [.05] 1.18 [.05] 7.62 [.30] 5.08 [.20] 5.08 [.20] 7.62 [.30] ? 1.00 typ [.04]
|