revision 4/26/2018 www.phihong.com 30 w single port power over ethernet midspan ieee802.3at compliant power injector features ? compliant with ieee802.3at standard ? limited power source ? non - vented case ? gigabit compatible ? full protection ovp, ocp ? 1 year warranty ? may power cisco ap1250 with accy125x dongle applications ? ip telephones ? security cameras ? wireless access points ? ip print servers ? bluetooth ? access points ? wimax ? access points safety approvals ? cul/u l ? ce mechanic al characteristics ? length: 140mm (5.51in.) ? height: 36mm (1.42in.) ? width: 65mm (2.55in.) ? weight: 0.2kg (7.58oz) output specifications ph ihong is not responsible for any error, and reserves the right to make changes without notice. please visit our website at ww w.phihong.com for the most up - to - date specifications and contact information. model ac input dc output voltage load regulation min. max. line load poe29 u - 1at three wire 56v 10ma 535ma 5%
revision 4/26/2018 poe29 u - 1at characteristics www.phihong.com input: ac input voltage rating 100 to 240vac ac input voltage range 90 to 264vac ac input current 0.8a (rms) maximum at 120vac 0.55a (rms) maximum at 240vac ac input frequency 47 to 63hz leakage current 350u a ma x max in - rush current 60a max at 240vac and maxload (cold start at ambient 25c) output: output power 30 w hold up time 10msec min at max load at 120vac, 60hz efficiency 80% typical at max load at 120vac, 60hz e nvir onmental: temperature operating - 20 c to + 4 0c non - operating - 20 c to +70 c relative humidity 5 to 90% emi en55022 class b fcc part 15 class b emc esd: iec61000 - 4 - 2 , level 3 rs: iec61000 - 4 - 3, level 3 eft/burst: iec61000 - 4 - 4, level 2 surge: iec61000 - 4 - 5 , level 3 cs: iec61000 - 4 - 6 , level 3 voltage dips: iec61000 - 4 - 11 harmonic: iec61000 - 3 - 2, class a isolation (hi - pot) primary to secondary: 1500vac for 1 minute, 10ma insulation resistance primary to secondary: 10m ohm 500vd c f eatures : over voltage/current, short circuit protection the output is equipped with short - circuit protection and overload protection as per the ieee 802.3at specification and conforms to ul60950 - 2 . the output can be shorted permanently without damage. indicator solid green: valid ieee802.3at load detected and connected on blinking green: power on ready for connection blinking gree n /red : invalid load connected blinking red /green : fault ac input connector iec320 c1 4 - three wire output connection +pins 3,6 / - pins 1,2 data in/poe out connector rj45
revision 4/26/2018 dimensional diagram unit: mm www.phihong.com
|
