1 technical data sheet smb jack bulkhead connector clamp/solder attachment for pe-sr405al, pe-sr405fl, rg405 smb jack bulkhead connector clamp/solder attachment for pe-sr405al, pe-sr405fl, rg405 confguration connector smb jack connector specifcation mil-std-348a connector interface type pe-sr405al,pe-sr405fl,rg405 cable attachment method (shield/contact) clamp/solder body style straight mount method bulkhead electrical specifcations impedance, ohms 50 mechanical specifcations size length, in [mm] 0.695 [17.65] width/dia., in [mm] 0.25 [6] . weight, lbs [g] 0.005 [2.27] connector type smb jack contact material and plating brass, gold contact plating specifcation 30 in. minimum body material and plating brass, nickel body plating specifcation 100 in. minimum dielectric type t efon compliance certifcations (visit www.pasternack.com for current document) rohs compliant y es plotted and other data notes: v alues at 25 c, sea level click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: smb jack bulkhead connector clamp/solder attachment for pe-sr405al, pe-sr405fl, rg405 PE4362 PE4362 PE4362 rev
2 technical data sheet smb jack bulkhead connector clamp/solder attachment for pe-sr405al, pe-sr405fl, rg405 from pasternack enterprises has same day shipment for domestic and international orders. our rf, microwave and fber optic products maintain a 99% availability and are part of the broadest selection in the industry . click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: smb jack bulkhead connector clamp/solder attachment for pe-sr405al, pe-sr405fl, rg405 PE4362 url: http://www.pasternack.com/smb-jack-standard-pe-sr405al-pe-sr405f-rg405-connector-PE4362-p.aspx smb jack bulkhead connector clamp/solder attachment for pe-sr405al, pe-sr405fl, rg405 PE4362 PE4362 rev
? 2013 pasternack enterprises all rights reserved 3 PE4362 rev scale n/a dwg title cad file 2233 fscm no. 53919 rev. - 081604 size a PE4362 notes: 1. unless otherwise specified all dimensions are nominal. 2. all specifications are subject to change without notice at any time. 3. dimensions are in inches [mm]. 4. fits mil-c-17 and equivalent cables. 1. strip cable as shown. do not nick center conductor & dielectric. slide clamp nut (1) over cable. 2. push sleeve (2) over cable until sleeve (2) bottoms on outer conductor with center conductor protruding through hole. solder sleeve (2) to outer conductor. 3. solder contact to center conductor. clean excess solder. slide assembly into body & tighten. assembly procedures smb jack bulkhead connector clamp/solder attachment for pe-sr405al, pe-sr405fl, rg405 pe4 cad drawing
|
