1 confguration ? smb jack connector ? mil-std-348a ? 50 ohms ? straight body geometry ? pe-sr405al, pe-sr405fl, rg405 interface type ? clamp/solder attachment ? bulkhead features ? gold plated brass contact ? 30 in minimum contact plating applications ? general purpose test ? rack and panel mount applications ? custom cable assemblies . description pasternacks pe4362 smb jack bulkhead connector with clamp/solder attachment for pe-sr405al, pe-sr405fl and rg405 is part of our full line of rf components available for same-day shipping. this smb bulkhead connector allows designers to create external connections on their product enclosures, and can be used in a variety of other rack mount and panel mount applications. our smb jack bulkhead connector pe4362 datasheet specifcations and drawing with dimensions are shown below in this pdf. pasternacks broad catalog of rf, microwave and millimeter wave connectors allows designers to confgure and customize their signal connections however they like. whether the need is to provide an i/o for a board design, or simply create a custom cable assembly confguration, pasternack has the right connector for the job. pasternack can also expertly build your custom cable assemblies for you and ship same-day. mechanical specifcations size length 0.695 in [17.65 mm] width/dia. 0.25 in [6.35 mm] . weight 0.005 lbs [2.27 g] . material specifcations description material plating contact brass gold 30 in minimum insulation ptfe body brass nickel 100 in minimum . click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: smb jack bulkhead mount connector clamp/solder attachment for pe-sr405al, pe-sr - 405fl, rg405 pe4362 pe4362 rev 1.1 smb jack bulkhead mount connector clamp/solder attachment for pe-sr405al, pe-sr405fl, rg405 rf connectors technical data sheet pe4362
2 compliance certifcations (see product page for current document) plotted and other data notes: smb jack bulkhead mount connector clamp/solder attachment for pe-sr405al, pe-sr405fl, rg405 from pasternack enterprises has same day shipment for domestic and international orders. our rf, microwave and millimeter wave products maintain a 99% availability and are part of the broadest selection in the industry. click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: smb jack bulkhead mount connector clamp/solder attachment for pe-sr405al, pe-sr405fl, rg405 pe4362 url: https://www.pasternack.com/smb-jack-standard-pe-sr405al-pe-sr405f-rg405-connector-pe4362-p.aspx pe4362 rev 1.1 rf connectors technical data sheet pe4362 smb jack bulkhead mount connector clamp/solder attachment for pe-sr405al, pe-sr405fl, rg405
3 pe4362 rev 1.1 scale n/a dwg title cad file 2233 fscm no. 53919 rev. - 081604 size a pe4362 notes: 1. unless otherwise specified all dimensions are nominal. 2. all specifications are subject to change without notice at any time. 3. dimensions are in inches [mm]. 4. fits mil-c-17 and equivalent cables. 1. strip cable as shown. do not nick center conductor & dielectric. slide clamp nut (1) over cable. 2. push sleeve (2) over cable until sleeve (2) bottoms on outer conductor with center conductor protruding through hole. solder sleeve (2) to outer conductor. 3. solder contact to center conductor. clean excess solder. slide assembly into body & tighten. assembly procedures smb jack bulkhead mount connector clamp/solder attachment for pe-sr405al, pe-sr405fl, rg405 pe4362 cad drawing
|
