es1a-m3, es1b-m3, es1c-m3, ES1D-M3 www.vishay.com vishay general semiconductor revision: 19-feb-15 1 document number: 89273 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 surface mount ultrafast plastic rectifier typical applications for use in high frequency rectification and freewheeling application in switching mode converters and inverters for consumer, computer, automoti ve and telecommunication. features ? low profile package ? ideal for automated placement ? glass passivated pellet chip junction ? ultrafast recovery ti mes for high efficiency ? low forward voltag e, low power losses ? high forward surge capability ? meets msl level 1, per j-st d-020, lf maximum peak of 260 c ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 mechanical data case: do-214ac (sma) ? molding compound meets ul 94 v-0 flammabi lity rating ? base p/n-m3 - halogen-free, rohs-compliant, and commercial grade terminals: matte tin plated leads, solderable per j-std-002 and jesd 22-b102 ? m3 suffix meets jesd 201 class 2 whisker test polarity: color band denotes cathode end primary characteristics i f(av) 1.0 a v rrm 50 v, 100 v, 150 v, 200 v i fsm 30 a t rr 15 ns v f at i f = 1.0 a 0.92 v t j max. 150 c package do-214ac (sma) diode variatio ns single die do-214ac ( s ma) maximum ratings (t a = 25 c unless otherwise noted) parameter symbol es1a es1b es1c es1d unit device marking code ea eb ec ed maximum repetitive pe ak reverse voltage v rrm 50 100 150 200 v maximum rms voltage v rms 35 70 105 140 v maximum dc blocking voltage v dc 50 100 150 200 v maximum average forward rectified current (fig. 1) i f(av) 1.0 a peak forward surge current 8. 3 ms single ha lf sine-wave superimposed on rated load i fsm 30 a operating junction and storage temperature range t j , t stg -55 to +150 c
es1a-m3, es1b-m3, es1c-m3, ES1D-M3 www.vishay.com vishay general semiconductor revision: 19-feb-15 2 document number: 89273 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) pulse test: 300 s pulse width, 1 % duty cycle note (1) units mounted on pcb 5.0 mm x 5.0 mm (0.013 mm thick) land areas electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol value unit maximum instantaneous forward voltage i f = 0.6 a v f (1) 0.865 v i f = 1.0 a v f 0.920 maximum dc reverse current at rated dc blocking voltage t a = 25 c i r 5.0 a t a = 100 c 100 maximum reverse recovery time i f = 0.5 a, i r = 1.0 a, l rr = 0.25 a t rr 15 ns maximum reverse recovery time i f = 0.6 a, v r = 30 v, ? di/dt = 50 a/s, i rr = 10 % i rm t j = 25 c t rr 25 ns t j = 100 c 35 maximum stored charge i f = 0.6 a, v r = 30 v, ? di/dt = 50 a/s, i rr = 10 % i rm t j = 25 c q rr 10 nc t j = 100 c 25 typical junction capa citance 4.0 v, 1 mhz c j 10 pf thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol es1a es1b es1c es1d unit typical thermal resistance r ? ja (1) 85 c/w r ? jl (1) 35 ordering information (example) preferred p/n unit weight (g) preferred pa ckage code base quantity delivery mode ES1D-M3/61t 0.064 61t 1800 7" diam eter plastic tape and reel ES1D-M3/5at 0.064 5at 7500 13" diam eter plastic tape and reel
es1a-m3, es1b-m3, es1c-m3, ES1D-M3 www.vishay.com vishay general semiconductor revision: 19-feb-15 3 document number: 89273 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ratings and characteristics curves (t a = 25 c unless otherwise noted) fig. 1 - maximum forward current derating curve fig. 2 - maximum non-repetitive peak forward surge current fig. 3 - typical instantaneous forward characteristics fig. 4 - typical reverse leakage characteristics fig. 5 - typical j unction capacitance fig. 6 - typical thermal impedance 0 1.2 80 90 100 110 120 130 140 150 0.8 1.0 0.2 0.4 0.6 average forward re ctified current (a) lead temperature (c) resistive or inductive load p.c.b. mounted on 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pad areas 1 10 100 5 10 15 20 25 30 0 8.3 ms single half sine-wave number of cycles at 60 hz peak forward surge current (a) t j = 150 c t j = 125 c t j = 100 c t j = 25 c 100 10 1 0.1 0.01 instantaneous forward current (a) instantaneous forward voltage (v) 0.2 0.4 0.6 0.8 1.0 1.2 1.4 t j = 150 c t j = 125 c t j = 100 c t j = 25 c percent of rated peak reverse voltage (%) 0 20406080100 1000 100 10 1 0.1 instantaneous reverse leakage current (a) t j = 25 c f = 1.0 mhz v sig = 50mvp-p reverse voltage (v) junction capacitance (pf) 14 12 10 8 6 4 2 0 0.1 1 10 100 mounted on 0.2" x 0.2" (5 mm x 7 mm) copper pad areas 100 10 1 0.1 1 10 100 t - pulse duration (s) transient thermal impedance (c/w)
es1a-m3, es1b-m3, es1c-m3, ES1D-M3 www.vishay.com vishay general semiconductor revision: 19-feb-15 4 document number: 89273 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package outline dimensions in inches (millimeters) 0.008 (0.203) 0.194 (4.93) 0.208 (5.28) 0.157 (3.99) 0.177 (4.50) 0.100 (2.54) 0.110 (2.79) 0.078 (1.98) 0.090 (2.29) 0.006 (0.152) 0.012 (0.305) 0.049 (1.25) 0.065 (1.65) cathode band 0 (0) do-214ac ( s ma) mountin g pad layout 0.074 (1.88) max. 0.208 (5.28) ref. 0.066 (1.68) min. 0.060 (1.52) min. 0.030 (0.76) 0.060 (1.52)
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
