notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com page 1 of 1 maximum ratings typical performance data frequency (mhz) insertion loss (db) low pass filter electrical specifcations operating temperature -55c to 100c storage temperature -55c to 100c rf power input 0.5w max. applications ? linear modulation techniques ? voice transmission applications ? digital communications features ? fat group delay for low pulse distortion ? rugged shielded case ? other sblp models available with wide selection of cut-off frequencies return loss (db) frequency (mhz) group delay (nsec) _ x low pass filter SBLP-933+ rev. c m151107 SBLP-933+ 150928 coaxial 50 ? flat time delay dc to 560 mhz insertion loss 0 10 20 30 40 50 60 0 800 1600 2400 3200 4000 frequency(mhz) insertion loss (db) at rf level of 0 dbm return loss 0 10 20 30 40 50 0 800 1600 2400 3200 4000 frequency(mhz) return loss (db) at rf level of 0 dbm group delay 0.0 0.3 0.6 0.9 1.2 1.5 0 500 1000 1500 2000 2500 3000 frequency (mhz) group delay (nsec) at rf level of 0 dbm passband (mhz) fco, mhz nom. stopband (mhz) vswr (:1) group delay variation (nsec) (loss <1.2 db) min. (loss 3 db) (loss > 10 db) (loss > 20 db) dc-0.2fco x dc-0.6fco x dc-fco x dc-2fco x dc-2.67fco x dc-560 933 1866-2490 2490 1.3:1 2.2:1 0.09 0.2 0.28 electrical schematic 10.0 0.01 0.1 43.3 10.0 0.568 195.0 0.11 0.1 18.1 105.0 0.594 285.0 0.21 0.1 14.5 195.0 0.591 380.0 0.38 0.1 11.6 285.0 0.593 470.0 0.59 0.1 9.4 380.0 0.577 560.0 0.88 0.1 7.6 470.0 0.596 600.0 1.05 0.1 7.0 560.0 0.594 825.0 2.24 0.1 4.2 600.0 0.626 933.0 3.00 0.1 3.3 715.0 0.584 1000.0 3.49 0.1 2.9 825.0 0.654 1250.0 5.97 0.1 1.7 933.0 0.591 1495.0 9.72 0.1 0.8 1000.0 0.609 1620.0 12.16 0.2 0.5 1125.0 0.610 1745.0 14.88 0.2 0.3 1250.0 0.645 1866.0 17.63 0.3 0.2 1375.0 0.601 2000.0 20.52 0.3 0.2 1495.0 0.606 2140.0 23.58 0.3 0.2 1620.0 0.510 2280.0 26.55 0.2 0.2 1745.0 0.528 2350.0 28.00 0.2 0.2 1866.0 0.423 2420.0 29.40 0.2 0.2 2000.0 0.462 2490.0 30.81 0.3 0.3 2070.0 0.422 2500.0 30.99 0.3 0.3 2140.0 0.338 2750.0 35.70 0.5 0.3 2210.0 0.404 3000.0 35.69 1.0 0.4 2280.0 0.430 3250.0 44.45 2.1 0.4 2350.0 0.336 3500.0 50.66 4.7 0.4 2420.0 0.364 3625.0 52.33 4.9 0.3 2490.0 0.310 3750.0 52.01 3.4 0.3 2500.0 0.366 3875.0 50.70 2.2 0.3 2625.0 0.392 4000.0 49.92 2.5 0.3 2750.0 0.519 outline drawing outline dimensions ( ) inch mm 2 0 d b 1 0 d b 3 d b 1 . 2 d b . 1 f c o 0 . 6 1 2 2 . 6 7 f r e q u e n c y , r e l . t o f c o a t t e n u a t i o n , d b t y p i c a l f r e q u e n c y r e s p o n s e i n s e r t i o n l o s s t y p i c a l g r o u p d e l a y f c o d e l a y , n s x f c o , g h z f r e q u e n c y , r e l . t o f c o b d e wt .67 1.98 .312 grams 17.02 50.29 7.92 42.0 permanent damage may occur if any of these limits are exceeded. case style: ff99 connectors model sma SBLP-933+ +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
|
