1 photomicrosensor (transmissive) ee-sx3162/3163/3164-p series ee-sx4162/4163/4164-p series ee-5002 1m slot / connector type ? photo ic output (dark-on / light on) ? connector with strong lock manufactured by jst. mates with ghr-03. ? mounted with m2 screws ? models available for 5-v or 12-v power supply. ? zener diode mounted for greater noise immunity (ee-sx3162-p1-z and EE-SX4162-P1-Z only). ? connector with cable (order separately) is available. ee-5002 1m (refer to page 5.) features models with connectors eliminate the need for a separate pcb all-in-one structure facilitates downsizing models available for mounting on x, y, and z axes models with connectors are available with different mounting directions. be sure to read safety precautions on page 3. photomicro sensor control pcb no pcb designing! enables downsizing! axis x axis z axis y application office automation equipment (copier, printer) amusement equipment home appliances (air cleaner) vending machine, atm
ee-sx3162/3163/3164-p series ee-sx4162/4163/ 4164-p series ee-5002 1m 2 ordering information photomicrosensor ratings, characteristics an d exterior specifications absolute maximum ratings (ta = 25c) * even if the specified conditions are met, perform derating of the voltage and current as required by the temperature rating diagram. also, do not expose the product to freezing or condensation. exterior specifications electrical and optical characteristics (ta = 25c) *1. the value of the response frequency is measured by rotating the disk as shown below. *2. only with models ending in -z. appearance sensing method connecting method sensing distance aperture size (h w) (mm) output type power supply voltage output configuration model side mounting transmissive (slot type) connector emitter 1.4 x 1.4 detector 1.4 x 0.5 photo ic 12 vdc dark-on ee-sx3162-p1 ee-sx3162-p1-z light-on ee-sx4162-p1 EE-SX4162-P1-Z 5 vdc dark-on ee-sx3162-p2 light-on ee-sx4162-p2 l-shaped mounting 12 vdc dark-on ee-sx3163-p1 light-on ee-sx4163-p1 5 vdc dark-on ee-sx3163-p2 light-on ee-sx4163-p2 horizontal mounting 12 vdc dark-on ee-sx3164-p1 light-on ee-sx4164-p1 5 vdc dark-on ee-sx3164-p2 light-on ee-sx4164-p2 14 16 13 5 mm (slot width) 14.7 13.3 13.6 14 8.3 22.6 item symbol rated value unit remarks ee-sx3162-p1 ee-sx3162-p1-z ee-sx3163-p1 ee-sx3164-p1 ee-sx4162-p1 EE-SX4162-P1-Z ee-sx4163-p1 ee-sx4164-p1 ee-sx3162-p2 ee-sx3163-p2 ee-sx3164-p2 ee-sx4162-p2 ee-sx4163-p2 ee-sx4164-p2 power supply voltage v cc 13.2 dc 5.5 dc v ? output voltage v out 13.2 v ? output current i out 16 ma ? permissible output dissipation p out 80 mw ? * operating temperature t opr -20 to +85 c ? * storage temperature t stg -30 to +85 c ? * appearance side mounting l-shaped mounting horizontal mounting item ee-sx3162-p1 ee-sx3162-p1-z ee-sx4162-p1 EE-SX4162-P1-Z ee-sx3162-p2 ee-sx4162-p2 ee-sx3163-p1 ee-sx4163-p1 ee-sx3163-p2 ee-sx4163-p2 ee-sx3164-p1 ee-sx4164-p1 ee-sx3164-p2 ee-sx4164-p2 connecting method connector weight approx. 1.2 g approx.1.4 g approx. 1.1 g material case polybutylene terephthalate (pbt) emitter and receiver sections polyphenylene sulfide (pps) item symbol rated value 12 vdc model 5 vdc model dark- on ee-sx3162-p1 ee-sx3162-p1-z ee-sx3163-p1 ee-sx3164-p1 ee-sx3162-p2 ee-sx3163-p2 ee-sx3164-p2 light- on ee-sx4162-p1 EE-SX4162-P1-Z ee-sx4163-p1 ee-sx4164-p1 ee-sx4162-p2 ee-sx4163-p2 ee-sx4164-p2 power supply voltage v cc 10.8 to 13.2vdc 4.5 to 5.5 vdc current consumption i cc 25 ma max. (with and without incident) low-level output voltage v ol 0.3 v max. (i out =16 ma) (dark-on: without incident, light-on: with incident) high-level output voltage v oh (v cc 0.9 v max. (v out =v cc , r l =47 k )) (dark-on: with incident, light-on: without incident) response frequency f 3 khz min. (v out =v cc , i out =16 ma * 1) 1 khz min. (v out =v cc , i out =16 ma * 1, * 2) 0.5 mm 0.5 mm 2.1 mm disk
ee-sx3162/3163/3164-p series ee-sx4162/4163/ 4164-p series ee-5002 1m 3 engineering data (reference value) safety precautions to ensure safe operation, be sure to read and follow the instruction manual provided with the sensor. this product is not designed or rated for ensuring safety of persons either directly or indirectly. do not use it for such purposes. do not use the product with a voltage or current that exceeds the rated range. applying a voltage or current that is higher than the rated range may result in explosion or fire. do not miswire such as the polarity of the power supply voltage. otherwise the product may be damaged or it may burn. do not short-circuit the load. otherwise explosion or burning may occur. this product does not resist water. do not use the product in places where water or oil may be sprayed onto the product. do not use the product in atmospheres or environments that exceed product ratings. dispose of this product as industrial waste. fig 1. output allowable dissipation vs. ambient temperature characteristics fig 2. sensing position characteristics (typical) fig 3. sensing posi tion characteristics (typical) ambient temperature ta (c) 0 20 40 60 8 0 100 -40 -30 -20 -10 0 10 20 30 40 50 60 70 8 090100 output allo w able dissipation pout (mw) distance d (mm) -3 d 1 = 00.3 mm v cc = 12 v ta = 25c r l = 47 k d 1 -2 -1 0 1 2 3 d (center of axis) off (on) output transistor light interrupting plate on off ( ) output off (high) output on (lo w ) -3 d2 = 00.7 mm -2-10123 d d 2 distance d (mm) v cc = 12 v ta = 25c r l = 47 k (center of axis) output transistor caution precautions for safe use precautions for correct use
ee-sx3162/3163/3164-p series ee-sx4162/4163/ 4164-p series ee-5002 1m 4 dimensions and internal circuit (unit: mm) photomicrosensor 6 (4.5) optical axis 2.7 13 11.6 7.5 8.3 4.5 5 (7) 6.4 (14) a a apert u re width (3) (1) (2) man u fact u red b y jst recommended mating connectors: jst (japan solderless terminal) ghr-03 2 16 11 8.3 5.6 2.5 5 cross section view a-a (detector side) 1.4 0.5 2.5 dia. 2-r1.55 marked s u rface ( b rand, model n u m b er, and lot) v o g v o g ee-sx3162-p1 ee-sx3162-p1-z ee-sx4162-p1 EE-SX4162-P1-Z ee-sx3162-p2 ee-sx4162-p2 internal circuit unless otherwise specified, the tolerances are as shown below. note: dimensions in parentheses are for reference only. dimensions tolerance 3 mm max. 0.2 3 < mm 6 0.24 6 < mm 10 0.29 10 < mm 18 0.35 18 < mm 30 0.42 terminal no. name (1) ground (gnd) (2) output (out) (3) power supply (v cc ) aperture size (h w) emitter detector 1.4 1.4 1.4 0.5 note: only with models ending in -z. man u fact u red b y jst (3) (1) (2) recommended mating connectors: jst (japan solderless terminal) ghr-03 (6.65) (13.2) 1.4 0.5 5.6 5 8.3 2.4 2.5 7.5 8.4 5 13.6 12.4 2.7 6.4 7.5 2.7 6.3 a a 2-r1.55 2.5 dia. optical axis apert u re width cross section view a-a (detector side) marked s u rface ( b rand, model n u m b er, and lot) v o g ee-sx3163-p1 ee-sx4163-p1 ee-sx3163-p2 ee-sx4163-p2 internal circuit aperture size (h w) emitter detector 1.4 1.4 1.4 0.5 terminal no. name (1) ground (gnd) (2) output (out) (3) power supply (v cc ) unless otherwise specified, the tolerances are as shown below. note: dimensions in parentheses are for reference only. dimensions tolerance 3 mm max. 0.2 3 < mm 6 0.24 6 < mm 10 0.29 10 < mm 18 0.35 18 < mm 30 0.42
ee-sx3162/3163/3164-p series ee-sx4162/4163/ 4164-p series ee-5002 1m 5 connector with cable (order separately) optical axis (8.5) (4.15) 1.4 0.5 8.3 5.6 5 12.6 5 2.5 22.6 2.7 10 11.6 (7) 6.4 17.6 7.5 2.7 8.4 (14) a a 2 2.5 dia. 2-r1.55 cross section view a-a (detector side) apert u re width recommended mating connectors: jst (japan solderless terminal) ghr-03 man u fact u red b y jst (3) (1) (2) marked s u rface ( b rand, model n u m b er, and lot) ee-sx3164-p1 ee-sx4164-p1 ee-sx3164-p2 ee-sx4164-p2 terminal no. name (1) ground (gnd) (2) output (out) (3) power supply (v cc ) aperture size (h w) emitter detector 1.4 1.4 1.4 0.5 unless otherwise specified, the tolerances are as shown below. note: dimensions in parentheses are for reference only. dimensions tolerance 3 mm max. 0.2 3 < mm 6 0.24 6 < mm 10 0.29 10 < mm 18 0.35 18 < mm 30 0.42 v o g internal circuit 3 2 1 (3) (1) (2) 1,000 10 3 0.5 ee-5002 1m no. name model/ specifications quantity manufacturer (1) connector, hs for 101-150 harness ghr-03v-s 1 jst (2) connector, ct for 101-150 harness sshl-002tp0.2 3 jst (3) lead wires ul1061 awg26 3 ? wiring connector circuit number lead-wire color 1blue 2black 3brown
? application examples provided in this doc u ment are for reference only. in act u al applications, confirm eq u ipment f u nctions and safety b efore u sing the prod u ct. ? cons u lt yo u r omro n representative b efore u sing the prod u ct u nder conditions which are not descri b ed in the man u al or applying the prod u ct to n u clear control systems, railroad systems, aviation systems, vehicles, com bu stion systems, medical eq u ipment, am u sement machines, safety eq u ipment, and other systems or eq u ipment that may have a serio u s infl u ence on lives and property if u sed improperly. make s u re that the ratings and performance characteristics of the prod u ct provide a margin of safety for the system or eq u ipment, and b e s u re to provide the system or eq u ipment with do ub le safety mechanisms. omron corporation electronic and mechanical components company contact: www.omron.com/ecb cat. no. e460-e1-04 1217(1016)(o) note: do not use this document to operate the unit.
|
