page 1 of 2 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com electrical specifcations at 25c maximum ratings parameter ratings operating temperature -40c to 85c storage temperature -55c to 100c rf power 0.25w dc current 30ma pin connections function pin number primary dot 6 primary 4 secondary dot 1 secondary 3 not used 2 permanent damage may occur if any of these limits are exceeded. TC1-1-13M-75X+ 75 ? 4.5 to 3000 mhz parameter frequency (mhz) min. typ. max. unit impedance ratio 1 ohm frequency range 4.5 3000 mhz insertion loss* 2000 - 3000 3.0 db 1000 - 2000 2.0 4.5 - 1000 1.0 amplitude unbalance 1000 - 2000 0.5 db 4.5 - 1000 0.7 phase unbalance 1000 - 2000 3.0 degree 4.5 - 1000 2.0 a vailable t ape and reel at no extra cost reel size devices/reel 7? 20, 50, 100, 200, 500 13? 1000, 2000 features ? wideband, 4.5 to 3000 mhz ? balanced transmission line ? good return loss ? excellent amplitude unbalance, 0.7 db typ. and phase unbalance, 2 deg typ. in 1 db bandwidth ? plastic base with leads ? aqueous washable * insertion loss is referenced to mid-band loss, 0.5 db typ. case style: at1521 rev. a m164261 TC1-1-13M-75X+ ig/cp/am 171010 top hat ? surface mount rf transformer +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
page 2 of 2 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com TC1-1-13M-75X+ outline drawing additional notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp insertion loss 0.0 0.5 1.0 1.5 2.0 2.5 3.0 0 500 1000 1500 2000 2500 3000 frequency (mhz) insertion loss (db) input return loss 5 10 15 20 25 30 35 40 0 500 1000 1500 2000 2500 3000 frequency (mhz) return loss (db) typical performance data outline dimensions ( ) inch mm pcb land patter n sugg ested l a y o ut, t ol eranc e t o be withi n .002 note: 1. case material plastic 2. termination finish: tin plate over nickel plate. 3. lead #1 identi er shall be located in the cross-hatched area shown, on bottom view. identi er may be either a molded or marked feature. 4.top-hat total thickness: 0.13 inches max. frequency (mhz) insertion loss (db) input r. loss (db) amplitude unbalance (db) phase unbalance (deg.) a b c d e f .150 .150 .160 .050 .040 .025 3.81 3.81 4.06 1.27 1.02 0.64 g h j k wt .028 .065 .190 .030 grams 0.71 1.65 4.83 0.76 0.15 4.50 0.31 29.45 1.10 5.08 10.00 0.29 29.98 0.90 2.60 50.00 0.30 33.14 0.88 0.06 100.00 0.33 34.00 0.91 0.32 500.00 0.55 21.95 0.65 0.81 1000.00 0.71 16.13 0.61 2.12 1500.00 0.96 13.75 0.21 1.23 2000.00 1.19 12.82 0.30 0.38 2500.00 1.63 10.98 0.47 4.03 3000.00 2.39 8.36 0.49 8.50 confg. g demo board mcl p/n: tb-145+ suggested pcb layout (pl-244)
|
