maximum ratings operating temperature -55c to 85c storage temperature -55c to 100c absolute max. supply voltage (vcc) 6v absolute max. tuning voltage (vtune) 30v all specifcations 50 ohm system rev. a m152326 edr-8792f2 zx95-1015+ rav 150923 page 1 of 2 electrical specifcations coaxial voltage controlled oscillator zx95-1015+ case style: gb956 connectors model sma ZX95-1015-S+ ? r & d ? lab ? instrumentation ? wireless communications ? mobile tv applications ? low phase noise ? low pushing ? low pulling ? protected by us patent 6,790,049 features linear tuning 750 to 1010 mhz model freq. power phase noise tuning non harmonics pulling pushing dc no. (mhz) output dbc/hz ssb at offset harmonic (dbc) pk-pk (mhz/v) operating (dbm) frequencies,khz voltage sensi- port 3 db spurious @12 dbr power range tivity cap modulation (dbc) (mhz) typ. (v) (mhz/v) (pf) bandwidth vcc current (mhz) (volts) (ma) min. max. typ. 1 10 100 1000 min. max. typ. typ. typ. typ. typ. max. typ. typ. max. zx95-1015+ 750 1010 +6 -85 -113 -134 -154 0.5 28 7-15 70 35 -90 -20 -10 1 1.5 5 35 permanent damage may occur if any of these limits are exceeded. outline drawing outline dimensions ( ) inch mm a b c d e f g h j k l m n p q r s t wt. 1.20 .75 .46 1.18 .04 .38 .38 .57 .18 .33 .21 .22 .18 1.00 .50 .35 .18 .106 grams 30.48 19.05 11.68 29.97 1.02 9.65 9.65 14.48 4.57 8.38 5.33 5.59 4.57 25.40 12.70 8.89 4.57 2.69 35.0 http:// www .minicircuits .com/app/an40-010.pd f http:// www .minicircuits .com/app/an40-010.pd f http:// www .minicircuits .com/app/an40-010.pd f note: when soldering the dc connections, caution must be used to avoi d overheating the dc terminals. see application note an-40-10 . ! notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
performance data & curves* page 2 of 2 *at 25 o c unless mentioned otherwise zx95-1015+ zx95-1015+ frequency and tuning sensitivity 700 750 800 850 900 950 1000 1050 0 4 8 12 16 20 24 28 tuning voltage (v) frequency (mhz) 0 4 8 12 16 20 24 28 tuning sensitivity (mhz/v) freq. @ -55c freq. @ +25c freq. @ +85c t.sens @ +25c zx95-1015+ power output 4.0 4.5 5.0 5.5 6.0 6.5 7.0 0 4 8 12 16 20 24 28 tuning voltage (v) output power (dbm) -55c +25c +85c zx95-1015+ frequency pulling & pushing (vcc 5%) 0.0 0.5 1.0 1.5 2.0 2.5 0 4 8 12 16 20 24 28 tuning voltage (v) pushing (mhz/v) 0.0 0.5 1.0 1.5 2.0 2.5 pulling (mhz) pulling pushing zx95-1015+ phase noise vs. tuning voltage -160 -150 -140 -130 -120 -110 -100 -90 -80 0 4 8 12 16 20 24 28 tuning voltage (v) phase noise (dbc/hz) 1khz 10khz 100khz 1mhz zx95-1015+ harmonics level -50 -40 -30 -20 -10 0 0 4 8 12 16 20 24 28 tuning voltage (v) harmonics (dbc) f2 f3 f4 zx95-1015+ phase noise -160 -150 -140 -130 -120 -110 -100 -90 -80 1 10 100 1000 frequency offset (khz) phase noise (dbc/hz) v tune frequency power output icc harmonics (dbc) freq. freq. phase noise (dbc/hz) freq phase tune sens (mhz) (dbm) (ma) push pull at offsets offset noise at (mhz/v) (mhz/v) (mhz) (khz) 880 mhz -55 c +25 c +85 c -55 c +25 c +85 c f2 f3 f4 1khz 10khz 100khz 1mhz (dbc/hz) 0.00 14.17 723.9 722.6 721.6 6.71 6.66 6.15 23.06 -16.5 -41.1 -36.0 0.49 0.60 -87.2 -114.8 -136.3 -156.6 1.0 -83.22 0.50 12.87 731.0 729.7 728.7 6.58 6.61 6.19 23.09 -16.9 -40.1 -35.3 0.27 0.51 -88.1 -115.7 -137.1 -156.9 2.0 -93.07 2.00 11.27 749.7 748.4 747.3 6.31 6.48 6.26 23.12 -17.7 -37.4 -32.4 0.05 0.26 -90.3 -117.2 -138.5 -157.1 3.5 -100.38 4.00 12.68 772.9 771.4 770.0 6.21 6.38 6.29 23.06 -18.4 -35.4 -29.9 0.05 0.19 -89.5 -117.2 -138.7 -156.5 6.0 -106.96 6.00 14.48 799.1 797.7 796.2 6.16 6.25 6.26 22.93 -19.8 -33.5 -30.0 0.20 0.58 -89.2 -116.9 -138.5 -156.2 8.5 -110.45 8.00 15.29 828.5 827.2 825.7 6.13 6.11 6.14 22.82 -20.9 -30.5 -31.8 0.71 0.75 -87.2 -116.2 -138.0 -156.7 10.0 -112.04 10.00 15.40 859.1 857.9 856.3 6.11 5.98 5.96 22.74 -22.1 -27.7 -34.3 1.23 0.58 -85.4 -114.1 -136.0 -155.4 20.8 -119.59 11.00 15.30 874.5 873.3 871.7 6.15 5.95 5.88 22.69 -22.2 -27.3 -34.9 1.44 0.39 -85.0 -112.6 -135.0 -154.7 35.5 -125.08 12.00 14.99 889.9 888.6 886.9 6.20 5.96 5.81 22.68 -22.8 -26.0 -35.7 1.62 0.15 -83.9 -111.7 -134.2 -153.9 60.7 -129.77 13.00 14.49 905.1 903.6 901.9 6.23 5.97 5.75 22.70 -23.2 -25.6 -34.9 1.77 0.62 -83.7 -111.2 -133.7 -153.2 86.7 -132.84 14.00 13.82 919.7 918.1 916.4 6.25 5.96 5.66 22.71 -23.1 -24.8 -35.1 1.89 1.13 -83.6 -111.2 -133.7 -153.5 100.0 -134.27 15.00 13.07 933.6 931.9 930.3 6.23 5.92 5.55 22.72 -23.3 -24.3 -35.2 1.98 1.48 -84.3 -111.2 -134.1 -153.5 148.1 -137.47 16.00 12.30 946.8 945.0 943.4 6.23 5.88 5.43 22.72 -23.3 -24.1 -35.1 2.02 1.58 -84.8 -111.0 -134.6 -154.0 177.0 -139.00 17.00 11.51 959.1 957.3 955.6 6.22 5.83 5.33 22.72 -23.4 -23.9 -35.1 1.99 1.50 -85.2 -111.1 -134.6 -154.2 211.6 -140.82 18.00 10.71 970.6 968.8 967.1 6.22 5.80 5.24 22.73 -23.1 -23.9 -35.2 1.89 1.27 -85.9 -111.0 -134.9 -153.8 302.4 -144.15 20.00 9.12 991.2 989.4 987.5 6.22 5.72 5.09 22.82 -23.1 -23.4 -35.3 1.53 0.43 -85.8 -111.2 -134.5 -153.4 361.5 -145.88 22.00 7.68 1008.8 1006.9 1004.8 6.15 5.62 4.94 22.92 -23.1 -23.9 -34.6 1.17 0.75 -85.5 -111.2 -134.6 -153.9 507.5 -148.37 24.00 6.45 1023.5 1021.6 1019.4 6.06 5.49 4.77 22.98 -22.6 -23.2 -35.3 0.93 1.37 -85.4 -111.0 -134.1 -153.2 606.7 -150.29 26.00 5.35 1035.9 1034.0 1031.6 5.98 5.35 4.59 23.03 -22.6 -23.2 -34.8 0.81 1.71 -86.4 -110.7 -133.4 -152.5 851.6 -153.21 28.00 4.08 1046.0 1044.1 1041.4 5.83 5.17 4.44 23.07 -22.6 -23.6 -35.4 0.70 1.77 -85.4 -110.7 -133.2 -152.7 1000.0 -153.92 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com
|