freq. range (mhz) isolation (db) insertion loss (db) above 3.0 db phase unbalance (degrees) amplitude unbalance (db) f l -f u l m u l m u l m u l m u ty p. min ty p. min ty p. min ty p. max. ty p. max. ty p. max. max. max. max. max. max. max. 5-1000 24 17 25 20 30 18 0.4 0.8 0.4 1.0 0.8 1.5 3.0 4.0 5.0 0.2 0.3 0.4 l = 5-50 mhz m = 50-500 mhz u = 500-1000 mhz JYPS-2-4-75+ 2 way-0 75 ? 5 to 1000 mhz power splitter/combiner surface mount typical performance data electrical specifcations maximum ratings operating temperature -40c to 85c storage temperature -55c to 100c power input (as a splitter) 0.5w max. internal dissipation 0.125w max. outline drawing outline dimensions ( ) inch mm electrical schematic p c b l a n d p a t t e r n sugges t ed l a y o ut, t o l e r a n c e t o b e w i t hi n . 002 rev. e m151107 JYPS-2-4-75+ ed-4100 dy/td/cp/am 150818 a b c d e f g .395 .500 -- .100 .230 .100 .100 10.03 12.70 -- 2.54 5.84 2.54 2.54 h j k l wt .047 .065 .065 .425 grams 1.19 1.65 1.65 10.80 0.80 case style: bj293 features ? wideband, 5 to 1000 mhz ? excellent insertion loss 0.4 db typ. ? good isolation, 25 db typ. ? excellent vswr, 1.1:1 typ. applications ? cable tv ? vhf/uhf ? communications systems pin connections sum port 1 port 1 3 port 2 6 ground 7,8 not used 2,4,5 demo board mcl p/n: tb-105 suggested pcb layout (pl-069) JYPS-2-4-75 total loss 3.0 3.2 3.4 3.6 3.8 4.0 4.2 0 200 400 600 800 1000 frequency (mhz) total loss (db) s-1(db) s-2(db) JYPS-2-4-75 isolation 20 25 30 35 40 45 50 0 200 400 600 800 1000 frequency (mhz) isolation (db) JYPS-2-4-75 vswr 1.0 1.1 1.2 1.3 1.4 1.5 0 200 400 600 800 1000 frequency (mhz) vswr #s-vswr #1-vswr #2-vswr frequency (mhz) total loss 1 (db) amplitude unbalance (db) isolation (db) phase unbalance (deg.) vswr s vswr 1 vswr 2 s-1 s-2 5.00 3.35 3.33 0.02 24.26 0.03 1.06 1.23 1.24 10.00 3.34 3.35 0.01 25.21 0.01 1.05 1.21 1.21 30.00 3.33 3.34 0.01 25.19 0.05 1.04 1.20 1.21 45.00 3.35 3.35 0.00 25.07 0.08 1.05 1.20 1.21 100.00 3.37 3.36 0.00 25.19 0.16 1.08 1.20 1.20 175.00 3.39 3.38 0.02 25.84 0.34 1.14 1.19 1.19 250.00 3.46 3.42 0.04 26.93 0.46 1.19 1.18 1.18 325.00 3.48 3.43 0.04 28.49 0.61 1.23 1.17 1.17 425.00 3.52 3.44 0.07 31.97 0.73 1.26 1.16 1.15 550.00 3.60 3.47 0.14 42.08 0.86 1.24 1.12 1.11 700.00 3.66 3.48 0.18 37.99 0.84 1.16 1.07 1.06 800.00 3.76 3.55 0.21 32.92 0.84 1.09 1.05 1.07 900.00 3.82 3.56 0.27 31.64 0.59 1.03 1.06 1.10 940.00 3.87 3.57 0.30 31.86 0.42 1.02 1.07 1.12 1000.00 3.92 3.60 0.32 33.30 0.12 1.04 1.07 1.13 permanent damage may occur if any of these limits are exceeded. 1. total loss = insertion loss + 3db splitter loss. notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
|