universal ac input protections:short circuit/over load/over voltage cooling by free air convection led indicator for power on small and compact size built-in remote on-off control pwm control and regulated model number output volts output amps ripple & noise min load dc volt adjust peak load volt tolerance single output LPS75-3.3 3.3 volts(dc) 15 amps 80mv pk-pk 0~16.5amps 3~3.5volt(dc) 54.45w 3.0% LPS75-5 5 volts(dc) 15 amps 80mv pk-pk 0~16.5amps 4.75~5.5volt(dc) 82.5w 3.0% LPS75-12 12 volts(dc) 6.2 amps 100mv pk-pk 0~6.8amps 11~13.5volt(dc) 81.6w 2.0% LPS75-15 15 volts(dc) 5.0 amps 100mv pk-pk 0~5.5amps 13.5~16.5volt(dc) 82.5w 2.0% LPS75-24 24 volts(dc) 3.2 amps 120mv pk-pk 0~3.5amps 22~27volt(dc) 84w 2.0% LPS75-48 48 volts(dc) 1.56 amps 120mv pk-pk 0~1.7amps 45~54volt(dc) 81.6w 2.0% 75w single output switching power supply LPS75 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
input specifications input voltage range 90 ~ 264 vac; 127~370 volts(dc) frequency range 47-63 hz inrush current, typ: (cold start) 18amps@115vac / 36amps@230vac input current, typ. 1.9amps@115vac 1.1amps@230vac leakage current < 1mamps /240vac min load see selection chart output specifications voltage and current see selection chart line regulation 1.0% load regulation 3.0%: 3.3~5volts(dc) 2.0%: 12~15volts(dc) 1.0%: 24~48volts(dc) voltage tolerance (note2) see selection chart ripple/noise (note 1) see selection chart hold up time,typ @ fl 60ms/230vac 12ms/115vac setup, rise time @ fl 100ms, 35m/230vac 100ms, 35ms/115vac over voltage protection 3.8 ~ 4.45volt(dc): 3.3volts(dc) 5.75 ~ 6.75volt(dc): 5volts(dc) 13.8 ~ 16.2volt(dc): 12volts(dc) 17.25 ~ 20.25volt(dc): 15volts(dc) 27.6~ 32.4volt(dc): 24volts(dc) 57.6~ 67.2volt(dc): 48volts(dc) hiccup mode, auto recover over current protection 115 ~ 150% rated output power hiccup mode, auto recover dc volt adjust see selection chart peak load, 10s(note 3) see selection chart general specifications safety ul60950-1, tuv en60950-1 approved insulation resistance 100m? / 500volts(dc) emi compliance to en55022b (cispr22b) harmonic current compliance to en61000-3-2,-3 effciency, typ. 69% (lps-75-3.3) 77% (lps-75-5) 80% (lps-75-12) 81% (lps-75-15) 83% (lps-75-24) 83%(lps-75-48) isolation 3000vac input - output 1500vac input - ground 500vac output - ground ems compliance to en61000-4-2, 3, 4, 5, 6, 8, 11; env50204,en61000-6-2(en50082-2) heavy industry level, criteria a remote on/off rc+/rc-: 0~0.8volts(dc)= power on 4~10volts(dc)= power off environmental specifications oper. temperature -20c to +70c (see derate curve) storage temperature -20c to +85c, 10~95% rh relative humidity 20~90% rh non cond temperature coeffcient 0.04% / c (0-50c) mtbf 355khrs min,mil-hdbk-217f(25c) vibration 10~500hz, 2g10min./1cycle, period for 60min. each along x, y, z axes physical specifications size millimeters 222 x 55 x 30 inches 8.74 x 2.17 x 1.18 weight 10.58 oz (300g) note 1. ripple & noise are measured at 20mhz of bandwidth by using a 12 twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 2. tolerance : includes set up tolerance, line regulation and load regula - tion. 3. 33.3% duty cycle maximum within every 30 seconds. average output power should not exceed the rated power. all specifcations are typical at nominal input, full load, and 25c unless other - wise noted 75w single output switching power supply LPS75 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
75w single output switching power supply LPS75 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
75w single output switching power supply LPS75 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
|
