designed and manufactured in germany designed and manufactured in germany AXE10LN rev.2 www.axtal.com roemerring 9 drawing d0 fon: +49 (6261) 939834 d-74821 mosbach page 1(3) fax: +49 (6261) 939836 germany e-mail: info@axtal.com gmbh & co. kg specification AXE10LN rev.: 2 date: 2014-04-04 oscillator type: low phase noise smd spxo with hcmo s output parameter min. typ. max. unit condition frequency range 10 165 mhz frequency stability ppm initial tolerance 5 ppm vs. operating temperature range 5 ppm vs. supply voltage variation 0.5 ppm v s 5% vs. load change 0.5 ppm load 5% long term (aging) 1 st year 1 ppm @ 40c frequency adjustment range electronic frequency control (efc) n.a. ppm on re quest rf output signal waveform hcmos load 15 pf rise & decay time 5 ns symmetry (duty cycle) 40 60 % @ v s /2 start-up time 4 ms phase noise @ 100 mhz (note 3) -95 -125 -150 -155 -160 dbc/hz dbc/hz dbc/hz dbc/hz dbc/hz 10 hz 100 hz 1 khz 10 khz 100 khz supply voltage v s 3.15 4.75 3.3 5.0 3.45 5.25 v v option = ?33 option = ?50 current consumption (steady state) 30 ma @ +25c operating temperature range 0 +50 c (note 2) enclosure (see drawing) 14.4x9.5x6.0 max. mm iec 61837 co 27 weight 2 g packing tape & reel iec 60286-3 notes: 1. terminology and test conditions are according to ie c60679-1 and mil-prf-55310, unless otherwise stated 2. other temperature range and stabilities on request 3. phase noise at other frequencies on request absolute maximum ratings parameter min. max. unit condition supply voltage v s -0.5 v s + 10% v v s to gnd storage temperature -55 +125 c ordering code model option [supply voltage] revision frequency [mhz] AXE10LN 50 rev.2 100.000 example: AXE10LN-50_rev.2 C 100.000 mhz
designed and manufactured in germany designed and manufactured in germany AXE10LN rev.2 www.axtal.com roemerring 9 drawing d0 fon: +49 (6261) 939834 d-74821 mosbach page 2(3) fax: +49 (6261) 939836 germany e-mail: info@axtal.com gmbh & co. kg enclosure drawing pin connections pin # symbol function 1 n.c. no connection 2 n.c. no connection 3 gnd ground 4 rf out rf output 5 n.c. no connection 6 vs supply voltage handling and testing parameter procedure source handling and testing application note axan-011 www. axtal.com processing application note axan-012 www.axtal.com parameter procedure condition electrostatic discharge (esd) thd devices iec60749-26 hbm 2000 v smd devices iec60749-27 mm 200 v washable yes no rohs compliant yes no
designed and manufactured in germany designed and manufactured in germany AXE10LN rev.2 www.axtal.com roemerring 9 drawing d0 fon: +49 (6261) 939834 d-74821 mosbach page 3(3) fax: +49 (6261) 939836 germany e-mail: info@axtal.com gmbh & co. kg environmental conditions test iec 60068 part iec 60679-1 clause mil-std- 202g method mil-std- 810f method mil-prf- 55310d clause test conditions (iec) sealing tests (if applicable) 2-17 5.6.2 112e 3.6.1.2 gross leak: test qc, fine leak: test qk solderability resistance to soldering heat 2-20 2-58 5.6.3 208h 210f 3.6.52 3.6.48 test ta method 1 test td 1 method 2 test td 2 method 2 shock* 2-27 5.6.8 213b 516.4 3.6.40 test ea, 3 x pe r axes 100g, 6 ms half-sine pulse vibration, sinusoidal* 2-6 5.6.7.1 201a 204d 516.4-4 3.6.38.1 3.6.38.2 test fc, 30 min per axes, 10 hz - 55 hz 0,75mm; 55 hz - 2 khz, 10g vibration, random* 2-64 5.6.7.3 214a 514.5 3.6.38.3 3.6.38.4 test fdb endurance tests - ageing - extended aging 5.7.1 5.7.2 108a 4.8.35 30 days @ 85c, ocxo @25c 1000h, 2000h, 8000h @85c other environmental conditions on request data sheet is for information purposes only and may be subject to modifications or may be discontinued without notice. revision history rev. drawing date [dd.mm.yyyy] remarks author checked 1 d0 01.10.2012 first issue bn bn 2 d0 04.04.2014 stability parameters updated, 100 m hz phase noise added, environmental conditions updated, editorial changes hh hh
|