date revision specification control drawing this specification sheet forms a part of the latest issue of raychem specifiction 55pc. h title conductor - tin-coated copper insulation - radiation-crosslinked, modified etfe upper spec limit weight ( lbs/1000 ft. ) diameter ( in.) maximum resistance at 20c (ohms/1000 ft.) target value upper spec limit conductor diameter ( in.) lower spec limit target value conductor stranding (number x awg) wire size (awg) construction details upper spec limit 1.38 1.98 2.90 4.38 6.59 8.37 12.88 19.73 31.12 56.8 89.7 145. 227. 278. 343. 450. target value 26 24 22 20 18 16 14 12 10 8 6 4 2 1 0 00 19 x 38 19 x 36 19 x 34 19 x 32 19 x 30 19 x 29 19 x 27 37 x 28 37 x 26 133 x 29 133 x 27 133 x 25 665 x 30 817 x 30 1045 x 30 1330 x 30 .0362 .0412 .0472 .0557 .0654 .0730 .0882 .1074 .1328 .203 .251 .322 .397 .438 .483 .545 .0345 .0395 .0455 .0540 .0635 .0710 .0860 .1047 .1290 .196 .242 .311 .383 .424 .466 .525 .0328 .0378 .0438 .0523 .0616 .0690 .0838 .1020 .1252 .188 .233 .300 .370 .410 .449 .505 55PC0211 wire, radiation-crosslinked, modified, etfe-insulated, general purpose, light airframe 41.3 26.2 16.2 9.88 6.23 4.81 3.06 2.02 1.26 .701 .445 .280 .183 .152 .116 .091 1.52 2.13 3.06 4.57 6.90 8.70 13.33 20.30 32.13 59.9 94.7 154. 240. 291. 366. 481. part number 1/ part number: the "*" in the part numbers above shall be replaced by color code designators. 1/ example: awg 22, white: 55PC0211-22-9 awg 22, white with black stripe: 55PC0211-22-90 lower spec limit finished wire temperature rating: 150c maximum continuous conductor temperature voltage rating: 600 volts (rms) at sea level color: white preferred crosslink verification: 300 3c for 1 hour identification and color striping durability: 125 cycles (250 strokes) (minimum), 500 g weight insulation elongation and tensile strength: total insulation, elongation, 50% (minimum) tensile strength, 5000 lbf/in2 (minimum) insulation flaws: spark test, 3.0 kv (rms) impulse dielectric test, 8.0 kv (peak) insulation thickness: .008 in. (nominal) total insulation shrinkage: 230 3c for 1 hour, 0.125 in.(maximum) in 12 in. voltage withstand test (post environmental): 2500 volts (rms) 55PC0211-26-* 55PC0211-24-* 55PC0211-22-* 55PC0211-20-* 55PC0211-18-* 55PC0211-16-* 55PC0211-14-* 55PC0211-12-* 55PC0211-10-* 55PC0211- 8-* 55PC0211- 6-* 55PC0211- 4-* 55PC0211- 2-* 55PC0211- 1-* 55PC0211- 0-* 55PC0211-00-* wire ratings and additional requirements 07-08-04 .0183 .0233 .0293 .0375 .0464 .0527 .0659 .0845 .1070 .163 .205 .260 .330 .370 .415 .462 .0175 .0225 .0285 .0365 .0452 .0514 .0644 .0825 .1050 .158 .198 .250 .320 .360 .395 .440 .0191 .0241 .0301 .0385 .0476 .0538 .0674 .0865 .1090 .169 .212 .268 .340 .380 .425 .475 r r r r r wire & cable 501 oakside avenue redwood city, ca 94063-3800 phone: 1-800-227-8816 fax: 1-650-361-6297 1/ colors and color code designators shall be in accordance with mil-std-681. other codes and suffixes may be added to the part number, as necessary, to capture any additional requirements imposed by the purchase order. dimensions are in inches and, unless otherwise designated, are nominal page 1 of 1 this specification sheet takes precedence over documents referenced herein. referenced documents shall be of the issue in effect on date of invitation for bid. tyco electronics also reserves the right to make changes in materials or processing, which do not affect compliance with any sp ecification, without notification to buyer. users should evaluate the suitability of this product for their application. specifications are subject to change without noti ce.
|
