technical data sheet adaptor rpc-1.00 plug C rpc-1.85 jack 01S108-K00D3 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 email : info@rosenberger.de page 1 / 2 rf_35/09.14/6.2 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg all dimensions are in mm; tolerances according to i so 2768 m-h interface rpc-1.00 side according to iec 61169-31 rpc-1.85 side according to iec 61169-32 mechanically compatible with rpc-2.40 documents n/a material and plating connector parts material plating center conductor cube gold, min. 1.27 m, over nick el outer conductor cube or equiv. gold, min. 1.27 m, over nickel coupling nut stainless steel passivated dielectric peek
technical data sheet adaptor rpc-1.00 plug C rpc-1.85 jack 01S108-K00D3 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 email : info@rosenberger.de page 2 / 2 rf_35/09.14/6.2 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg electrical data frequency dc to 70 ghz return loss 3 19 db, dc to 20 ghz 3 17 db, 20 ghz to 50 ghz 3 14 db, 50 ghz to 70 ghz mechanical data rpc-1.00 rpc-1.85 mating cycles 3 500 3 500 maximum torque 0.70 nm 1.65 nm recommended torque 0.35 nm 0.90 nm gauge 0.00 mm to 0.03 mm 0.00 mm to 0.05 mm environmental data temperature range - 40 c to +85 c rohs compliant packing standard 1 pce in box weight 3.6 g/pce draft date approved date rev. engineering change n umber name date herbert babinger 25.01.05 markus mller 24.08.16 e 00 16-1394 marion striegler 24.08.16 while the information has been carefully compiled t o the best of our knowledge, nothing is intended as representation or warr anty on our part and no statement herein shall be construed as recommendation to infringe existing patents. in the effort to improve our products, we reserve the right to make changes judg ed to be necessary.
|