visit us at www.anaren.com usa/canada: toll free: europe: asia: (315) 4328909 (800) 4116596 +44 2392232392 +86 51262749282 model p d 0409 j 7575 s 2 hf rev a ultra low profile 0805 power divider 75 to 75 description the PD0409J7575S2HF is a low profile, subminiatur e wilkinson power divider in an easy to use surface mount package. the pd0409j7 575s2hf is ideal for high volume manufacturing and delivers higher performanc es than traditional printed and lumped element solutions. the PD0409J7575S2HF is m atched to 75 and has a height profile of 0.5 mm which is ideal for high le vel integrations in the following markets: gsm, wcdma, dvbh (europe) and terrestrial tv. the PD0409J7575S2HF does not include the resistive elem ent and therefore, requires an external resistor for operation. the pd0409j757 5s2hf is available on tape and reel for high volume manufacturing pick and place. etailed electrical specifications: specifications subject to change without notice. room (25 c) parameter min. typ. max unit frequency 400 900 mhz input port impedance 75 output port impedance 75 return loss 10 12 db insertion loss* 0.5 0.6 db amplitude balance 0.1 0.6 db phase balance 1 3 degrees isolation (output ports) 8.2 9.3 db power handling 2 watts features: ? 400900 mhz ? 9.3 db isolation (output ports) ? good return loss ? 0.5mm height profile ? 75 input / 75 outputs ? low insertion loss ? surface mountable ? tape & reel ? nonconductive surface ? rohs compliant ? external resistor required ? halogen free operating temperature 55 +85 oc * insertion loss stated at room temperature (insert ion loss is approximately 0.1 db higher at +85 oc) outline drawing top view (near side) side view bottom view (far side) 2x 0.15 4x 0.37 designation gnd input gnd output 1 gnd output 2 5 4 2 16 3 pin mechanical outline dimensions are in millimeters 2.040.10 1.290.10 0.540.05 1 2 3 6 5 6x 0.30 6x 0.22 4x 0.65 6x 0.98 orientation marker denotes pin location 4 orientation marker denotes pin location
visit us at www.anaren.com usa/canada: toll free: europe: asia: (315) 4328909 (800) 4116596 +44 2392232392 +86 51262749282 model p d 0409 j 7575 s 2 hf rev a typical broadband performance: 500 mhz. to 8.0 ghz. return loss input 36 33 30 27 24 21 18 15 12 9 6 3 0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 frequency [mhz] [db] insertion loss 36 33 30 27 24 21 18 15 12 9 6 3 0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 frequency [mhz] [db] amplitude balance 2 1.5 1 0.5 0 0.5 1 1.5 2 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 frequency [mhz] [db] phase balance 20 15 10 5 0 5 10 15 20 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 frequency [mhz] deg isolation 36 33 30 27 24 21 18 15 12 9 6 3 0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 frequency [mhz] [db]
visit us at www.anaren.com usa/canada: toll free: europe: asia: (315) 4328909 (800) 4116596 +44 2392232392 +86 51262749282 model p d 0409 j 7575 s 2 hf rev a typical performance: 300 mhz. to 1000 mhz. return loss input 36 33 30 27 24 21 18 15 12 9 6 3 0 300 400 500 600 700 800 900 1000 frequency [mhz] [db] insertion loss 3.6 3.3 3.0 2.7 2.4 2.1 1.8 1.5 1.2 0.9 0.6 0.3 0.0 300 400 500 600 700 800 900 1000 frequency [mhz] [db] amplitude balance 2 1.5 1 0.5 0 0.5 1 1.5 2 300 400 500 600 700 800 900 1000 frequency [mhz] [db] phase balance 20 15 10 5 0 5 10 15 20 300 400 500 600 700 800 900 1000 frequency [mhz] deg isolation 36 33 30 27 24 21 18 15 12 9 6 3 0 300 400 500 600 700 800 900 1000 frequency [mhz] [db]
visit us at www.anaren.com usa/canada: toll free: europe: asia: (315) 4328909 (800) 4116596 +44 2392232392 +86 51262749282 model p d 0409 j 7575 s 2 hf rev a mounting configuration: in order for xinger surface mount components to wor k optimally, the proper impedance transmission line s must be used to connect to the rf ports. if this condition is not satisfied, insertion loss, isolation and vs wr may not meet published specifications. all of the xinger components are constructed from o rganic ptfe based composites which possess excellen t electrical and mechanical stability. xinger compone nts are compliant to a variety of rohs and green st andards and ready for pbfree soldering processes. pads are gol d plated with a nickel barrier. an example of the pcb footprint used in the testing of these parts is shown below. in specific designs , the transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying pick and place equipment tolerances. in addition, s ince the PD0409J7575S2HF is a wilkinson power divid er, an external 0603 150 resistor must be mounted in locations r1 as shown in the figure below. pad footprint w/ 0603 resistor locations circuit pattern footprint pad (s) solder resist mounting footprint dimensions are in millimeters 6x .41 6x .33 .04 4x .25 .66 3x plated thru holes to ground 3x transmission lines r1
visit us at www.anaren.com usa/canada: toll free: europe: asia: (315) 4328909 (800) 4116596 +44 2392232392 +86 51262749282 model p d 0409 j 7575 s 2 hf rev a packaging and ordering information parts are available in reels and are packaged per e ia 4812. parts are oriented in tape and reel as s hown below. minimum order quantities are 4000 per reel. see model numbers be low for further ordering information . .81 8.00 4.00 2.00 1.75 3.50 4.00 1.60 .25 2.41
|
