aee10w-m series 10 watts total power: 10 watts input voltage: 12 v, 24 v or 48 v # of outputs: single, dual special features ? 4200 vac reinforced insulation ? insulation rated for 300 vac working voltage ? medical safety to ul/csa/en/iec 60601-1 3 rd edition ? 2 moop rated ? wide 2:1 input voltage range ? fully regulated output voltage ? low leakage current ? operating temp. range C40c to +85 c (with derating) ? input filter meets en 55022, class a and fcc, level a ? overload protection ? 2x 1 plastic package ? 3 years product warranty safety ? cul/ul60950-1, csa c22.2 no. 60950-1-03 ? ul60601-1, csa c22.2 no.601-1 ? iec/en 60950-1, iec/en 60601-1 3 rd edition, 2 moop ? iec60950-1 cb report, cul/ul 60950-1 certifcate ? ul60601-1 ul certifcate electrical specifcations input input ra nge 9 - 18 vdc; 18 - 36 vdc; 36 - 75 vdc effciency 82% output voltage tolerance 1.0% line regulation 0.5% load regulation 1.2% noise/ripple 100 mv ocp and s/c protection hiccup over voltage protection latched otp protection latched switching frequency 150 khz temperature coeffcient 0.02 /c isolation i/o isolation 4200 vacrms insulation resistance 10 gohm insulation capacitance 80 pf data sheet environmental specifcations operating ambient temperature range -40 c to +85 c storage temperature -50 c to +125 c humidity 5% to 95% (non-condensing) calculated mtbf 1 mhrs power
mechanical drawings pin connectors pin no. single output dual output 1 +vin +vin 2 -vin -vin 3 +vout +vout 4 no pin common 5 -vout -vout t: 11.0 mm (0.43 inch) for 24 v output models t: 10.2 mm (0.40 inch) for other output models ? all dimensions in mm (inches) ? tolerance: x.x0.25 (x.xx0.01) x.xx0.13 ( x.xxx0.005) ? pin dimension tolerance: 0.05 (0.002) physical characteristics case size (24 v output): 50.8 x 25.4 x 11 mm (2.0 x 1.0 x 0.43 inches) case size (other output): 50.8 x 25.4 x 10.2 mm (2.0 x 1.0 x 0.40 inches) case material: aluminium alloy, black anodized coating base material: fr4 pcb (fammability to ul 94v-0 rated) pin material: copper alloy with gold plate over nickel subplate weight: 30 g ordering information artesyn part number input voltage output 1 voltage output 2 voltage maximum power aee01a12-m 9 - 18 v 5 v 1.6 a 8 w aee00b12-m 9 - 18 v 12 v 0.835 a 10 w AEE00BB12-M 9 - 18 v 12 v 0.41 a -12 v 0.41 a 10 w aee00cc12-m 9 - 18 v 15 v 0.333 a -15 v 0.333 a 10 w aee02a24-m 18 - 36 v 5 v 2 a 10 w aee00b24-m 18 - 36 v 12 v 0.835 a 10 w aee00bb24-m 18 - 36 v 12 v 0.41 a -12 v 0.41 a 10 w aee00cc24-m 18 - 36 v 15 v 0.333 a -15 v 0.333 a 10 w aee02a48-m 36 - 5 v 5 v 2 a 10 w aee00b48-m 36 - 5 v 12 v 0.835 a 10 w aee00bb48-m 36 - 5 v 12 v 0.41 a -12 v 0.41 a 10 w aee00cc48-m 36 - 5v 15 v 0.333 a -15 v 0.333 a 10 w aee10w-m ds rev. 01.29.15 aee10w-m series data sheet worldwide offices americas 2900 s.diablo way tempe, az 85282 usa +1 888 412 7832 europe (uk) waterfront business park merry hill, dudley west midlands, dy5 1lx united kingdom +44 (0) 1384 842 211 asia (hk) 14/f, lu plaza 2 wing yip street kwun tong, kowloon hong kong +852 2176 3333 for more information: www.artesyn.com/power for support: productsupport.ep@artesyn.com www.artesyn.com while every precaution has been taken to ensure accuracy and completeness in this literature, artesyn embedded technologies assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. artesyn embedded technologies, artesyn and the artesyn embedded technologies logo are trademarks and service marks of artesyn embedded technologies, inc. all other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. ? 2015 artesyn embedded technologies, inc.
|
