http://www.ddknet.co.jp specifcations and/or dimenssions in this catalogue are subject to change without notice. your catalogue checking the latest speifcations with our drawings would be highly appreciated. ? low profle, 3mm thinner than dha series connector ?"d" shaped shell polarization to prevent from mis-mating. ? high reliable, scoop-proof cantilever contact design ? plastic hood with inner shell for esd protection ?one touch locking mechanism ? easy termination by assembly tools dhf series is a half pitch interface connector which is low profile emi shielded for small and high density applications. 3 p ) 4 $ p n q m j b o u 3 p ) 4 $ p n q m j b o u half pitch low profle connectors dhf series rated voltage 250v ac(r.m.s.) rated current 0.5a / contact dielectric withstanding voltage 500v ac(r.m.s.) at 1 minute insulation resistance 500m min. at 500v dc contact resistance 35m max. applicable cable awg#28, /0.127 stranded cable 0.58mm item material / finish contact copper alloy / au plating front shell brass / ni plating insulator lcp resin or polyamide resin / black cover polyamide resin / black inner shell steel / ni plating hood abs resin lock lever stainless steel abs resin cable clamp steel / sn-ag plating locator pbt resin or lcp resin / black ground tab copper alloy / ni plating lock screw and nut steel / ni plating specifications feature material / finish 141001 outline
unitmm dhf series http://www.ddknet.co.jp specifcations and/or dimenssions in this catalogue are subject to change without notice. your catalogue checking the latest speifcations with our drawings would be highly appreciated. 2 i/o cable plug connector (hood ) part number number of contact a b c d e (max.) dhf-pda10- -a 1-fa 10 22.75 10.80 5.08 5.0 23.75 dhf-pda20- -a 1-fa 20 29.10 17.15 11.43 5.8 30.10 dhf-pda10-3-a01-fa contact plating 1 contact area: au(0.76 m) over ni plating tail area: sn-ag plating 2 contact area: au(0.25 m) over ni plating tail area: sn-ag plating 3 contact area: au(flash) over ni plating tail area: sn-ag plating mating style p: plug connector hood color 0: black 1: beige 2: gray 3: dark grry connector style da: i/o cable type hood style a: plastic hood straight (long hood) fa: lead free 1: ddk mark number of contact 10, 20 please refer the instruction manual as attached with dhf assemb ly tool set. dhf cable calmp assembly tools are used depend on the number of contact. please refer to the above table. dhf cable calmp assembly tool set dhf cable clamp assembly tool dhf cable clamp locator for dhf-pda10,20 357j-12773 357j-12199 357j-12228-1-2 for dhf-pda10 357j-12773-10 357j-12228-1 for dhf-pda20 357j-12773-20 357j-12228-2 assembly tools $ # & |