technical data sheet fmc straight jack pcb 16p141 - 40m l4 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18 - 0 page p.o.box 1260 d - 84526 tittmoning germany www.rosenberger.de email: info@rosenberger.de 1 / 2 rf_35/11.05/3.1 all dimensions are in mm; tolerances according to iso 2768 m - h interface according to n/a documents pcb layout b 191 tape & reel packaging vg55.2m500 material and plating connector parts material plating center contact beryllium copper gold, min. 0.8 m, over chemical nickel outer contact brass gold, min. 0.15 m, over chemical nickel dielectric lcp
technical data sheet fmc straight jack pcb 16p141 - 40m l4 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18 - 0 page p.o.box 1260 d - 84526 tittmoning germany www.rosenberger.de email: info@rosenberger.de 2 / 2 rf_35/11.05/3.1 electrical data impedance 50 ? frequency dc to 10 ghz return loss 25 db, dc to 5 ghz 22 db, 5 to 10 ghz insertion loss 0.1 db x [ghz] f insu lation resistance 5 x10 3 m? center contact resistance 6 m ? outer contact resistance 2 m ? test voltage 500 v rms working voltage 335 v rms rf - leakage (valid for screened connection only) - 80 db up to 3 ghz - 65 db up to 10 ghz contact current 1.2 a dc max. - dependent on pcb layout - mechanical data mating cycles min. 100 engagement force 9 n max. disengagement force 2.2 n min. environmental data temperature range - 40 c to +105 c (completely deflected) max. soldering temperature iec 617 60 - 1, +260c for 10 sec. rapid change of temperature iec 60169 - 1 clause 16.4 ( - 40 c to +105 c) mixed flowing gas din en 60068 - 2 - 60 meth. 4 (10 d) vibration iec 61169 - 1 clause 9.3.3 (10 - 2000 hz; 15 g) shock iec 60169 - 1 clause 15.8 (50 g 11 ms half - sine) d amp heat iec 60169 - 1 clause 16.3 (+40 c 56 d) rohs compliant suitable cables n/a weight weight 0.25 g/pce draft date approved date rev. engineering change number name date andreas fellner 13/07/05 e _schwangler 0 4.05.16 i 0 0 1 6 - 0708 a _wallner 0 4.05.16 while the information has been carefully compiled to the best of our knowledge, nothing is intended as representatio n or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents. in the effort to improve our products, we reserve the right to make changes judged to be necessary.
|