connector accessories glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 printed in u.s.a. www.glenair.com cage code 06324 ? 2010 glenair, inc. e-mail: sales@glenair.com h-12 h 319-065 composite self-locking rotatable coupling swing-arm strain relief with composite emi/rfi shield sock & optional split ring u.s. patent no. 6419519 h flats (typ) anti-rotation device (typ) straight position captivated self-locking telescoping screws (typ) emi shroud (typ) a thread (typ) b (typ) k (typ) l j g d f (typ) e (typ) closed .062 (1.8) min .250 (6.4) max screw protrusion (typ) composite 75% - 25% amberstrand? basic number product series shell size 319 f 065 xo 16 r connector designator (f and h) finish r = split ring (687-207) & band (600-052) supplied (omit if not required) captive position- screw locks swing arm in 45 incre- ments (see notes 2, 3) screw head same side (typ) 45 position (see note 2) optional split ringp/n 687-207 90 position connector designator mil-dtl-38999 series i, ii (f) mil-dtl-38999 series iii and iv (h) f-h self-locking rotatable coupling
connector accessories glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 printed in u.s.a. www.glenair.com cage code 06324 ? 2010 glenair, inc. e-mail: sales@glenair.com h-13 h 319-065 composite self-locking rotatable coupling swing-arm strain relief with composite emi/rfi shield sock & optional split ring application notes 1. glenair series 600 backshell assembly tools are recommended for assembly and installation. 2. swing arm locks in 45 incrementsCsizes 08 thru 24, additional positioning increments are manufacturers option. 3. captive screw remains engaged to the body when positioning the arm. when tightened, the screw shall not protrude into the inside surfaces. 4. fits connector designators: mil-dtl-38999 series i, ii (f), mil-dtl-38999 series iii and iv (h), mil-dtl-5015 (a), and mil-dtl-26482 (a) 5. metric dimensions (mm) are indicated in parentheses. consult factory for additional entry sizes available. table iii: connector shell size order number shell size for connector designator f h b dia max d max e .06 (1.5) f min g max h flats max min j .06 (1.5) k ref l min 08 09 .812 (20.6) .980 (24.9) .265 (6.7) .220 (5.9) 1.060 (26.9) .750 (19.1) .736 (18.7) .940 (23.9) .265 (6.7) 7.000 (177.8) 10 11 .938 (23.8) 1.050 (26.7) .310 (7.9) .270 (6.9) 1.090 (27.7) .875 (22.2) .860 (21.8) .970 (24.6) .370 (9.4) 7.000 (177.8) 12 13 1.125 (28.6) 1.200 (30.5) .390 (9.9) .350 (8.9) 1.180 (30.0) 1.000 (25.4) .980 (24.9) 1.030 (26.2) .506 (12.9) 7.000 (177.8) 14 15 1.250 (31.8) 1.300 (33.0) .506 (12.9) .470 (11.9) 1.240 (31.5) 1.125 (28.6) 1.100 (27.9) 1.090 (27.7) .580 (14.7) 9.000 (228.6) 16 17 1.375 (34.9) 1.440 (36.6) .591 (15.0) .550 (14.0) 1.320 (33.5) 1.250 (31.8) 1.224 (31.1) 1.120 (28.4) .705 (17.9) 11.000 (279.4) 18 19 1.500 (38.1) 1.560 (39.6) .661 (16.8) .620 (15.7) 1.390 (35.3) 1.375 (34.9) 1.469 (37.3) 1.150 (29.2) .784 (19.9) 11.000 (279.4) 20 21 1.625 (41.3) 1.690 (42.9) .744 (18.9) .700 (17.8) 1.550 (39.4) 1.500 (38.1) 1.500 (38.1) 1.180 (30.0) .909 (23.1) 11.000 (279.4) 22 23 1.750 (44.5) 1.770 (45.0) .826 (21.0) .780 (19.8) 1.550 (39.4) 1.625 (41.3) 1.581 (40.2) 1.250 (31.8) 1.034 (26.3) 11.000 (279.4) 24 25 1.875 (47.6) 1.890 (48.0) .896 (22.8) .850 (21.6) 1.610 (40.9) 1.750 (44.5) 1.960 (49.8) 1.280 (32.5) 1.149 (29.2) 11.000 (279.4) table ii: finishes symbol finish xb composite material, no plating, color black, brass interface shroud and adapter - nickel plated xmt composite material, no plating, color black and brown, brass interface shroud and adapter - ni-ptfe 1000 hour grey tm (nickel-fluorocarbon polymer) xn composite material, no plating, color black and brown, brass interface shroud and adapter - selectively cadmium plated xo composite material, no plating, color black and brown, brass interface shroud and adapter - nickel plated
|