11/13/2013 features ? plastic package has underwriters laboratory flammability classification 94 v-o ? glass passivated chip junction in molded plastic package ? 1500w surge capability at 1ms ? excellent clamping capability ? low zener inpedance ? fast response time: typically less than 1.0 ps from 0 volts to bv min. ? typical ir less than 1a above 10v ? high temperature soldering guaranteed: 250c/10 seconds/ .375", (9.5mm) lead length, 5lbs., (2.3kg) tension ? includes 1n6373 thru 1n6385 mechanical data case: jedec do-201 molded plastic terminals: plated axial leads, solderable per mil-std-750, method 2026 polarity: color band denoted positive end (cathode) except bipolar mounting position: any weight: 0.045 ounces, 1.2 grams ratings at 25c ambient temperature unless otherwise specified. rating symbol value units peak pulse power dissipation at ta = 25 c, tp = 1ms (note 1) i ppm see table 1 amps superimposed on rated load, (jedec method)(note 3) operatings and storage temperature range t j , t stg -55 +175 c notes: 1. non-repetitive current pulse, per fig.3 and derated above ta=25 c per fig.2. 2. mounted on copper pad area of 0.8x0.8" (20x20mm) per fig.5. 3. 8.3ms single half sine-wave, or equivalent square wave, duty cycle=4 pulses per minutes maximum. certified rohs compliant ul file # e223026 glass passivated junction transient voltage suppressor standoff voltage- 5.0 to 45.0v volt maximum instantaneous forward voltage at 100a for unidirectional only v f 3.5 minimum 1500 watts p m (av) 5.0 mde semiconductor, inc. 78-150 calle tampico, unit 210, la quinta, ca., usa 92253 tel : 760-564-8656 ? fax : 760-564-2414 1-800-831-4881 email: sales@mdesemiconductor.com web: www.mdesemiconductor.com 1500 watt peak power icte5.0 to icte15c mpte-5 to mpte-45 1n6373 to 1n6381 and 1n6382 to 1n6389 steady state power dissipation at t l = 75c lead lengths .375", 9.5mm (note 2) peak forward surge current, 8.3ms single half sine-wave i fsm 200 peak pulse current of on 10/1000 s waveform (note 1) maximum ratings and characteristics amps watts p ppm
11/13/2013 reverse standoff voltage (vrwm) (v) minimum breakdown voltage vbr @ 1ma (volts) maximum reverse leakage ir @ vr (a) minimum clamping voltage (vc) @ ipp=1a (volts) maximum clamping voltage (vc) @ ipp=1a (volts) maximum peak pulse current ipp (a) icte-5* 1n6373 mpte-5* 5* 6.0 300.0 7.1 7.5 160.0 icte-8 1n6374 mpte-8 8.0 9.4 25.0 11.3 11.5 100.0 icte-10 1n6375 mpte-10 10.0 11.7 2.0 13.7 14.1 90.0 icte-12 1n6376 mpte-12 12.0 14.1 2.0 16.1 16.5 70.0 icte-15 1n6377 mpte-15 15.0 17.6 2.0 20.1 20.6 60.0 icte-18 1n6378 mpte-18 18.0 21.2 2.0 24.2 25.2 50.0 icte-22 1n6379 mpte-22 22.0 25.9 2.0 29.8 32.0 40.0 icte-36 1n6380 mpte-36 36.0 42.4 2.0 50.6 54.3 23.0 icte-45 1n6381 mpte-45 45.0 52.9 2.0 63.3 70.0 19.0 icte-8c 1n6382 mpte-8c 8.0 9.4 50 11.4 11.6 100.0 icte-10c 1n6383 mpte-10c 10.0 11.7 2.0 14.1 14.5 90.0 icte-12c 1n6384 MPTE-12C 12.0 14.1 2.0 16.7 17.1 70.0 icte-15c 1n6385 mpte-15c 15.0 17.6 2.0 20.8 21.4 60.0 icte-18c 1n6386 mpte-18c 18.0 21.2 2.0 24.8 25.5 50.0 icte-22c 1n6387 mpte-22c 22.0 25.9 2.0 30.8 32.0 40.0 icte-36c 1n6388 mpte-36c 36.0 42.4 2.0 50.6 54.3 23.0 icte-45c 1n6389 mpte-45c 45.0 52.9 2.0 63.3 70.0 19.0 *icte-5 is not available in bi-directional. suffix 'c' denotes bi-directional device. certified rohs compliant ul file # e223026 mde semiconductor, inc. 1-800-831-4881 email: sales@mdesemiconductor.com web: www.mdesemiconductor.com icte5.0 to icte15c mpte-5 to mpte-45 1n6373 to 1n6381 and 1n6382 to 1n6389 part numbers 78-150 calle tampico, unit 210, la quinta, ca., usa 92253 tel : 760-564-8656 ? fax : 760-564-2414 glass passivated junction transient voltage suppressor standoff voltage- 5.0 to 45.0v 1500 watt peak power
|
