1 ftr-k1 series n features l ul class b (130c) coil wire insulation l 1 form a (spst-no) or 1 form c (spdt) contact l low profle and space saving - height: 12.5 mm - mounting space: 290 mm 2 l high sensitivity in small package - operating power 110 to 140 mw - nominal power 220 to 290 mw l high insulation in small package - insulation distance : 8.0 mm (between coil and contacts) - dielectric strength : 5,000 vac - surge strength : 10,000 v l plastic materials - ul 94 fame class v-0 - ul cti level class 2 l plastic sealed type l various contact material options l rohs compliant. please see page 6 for more information note: actual marking omits the hyphen (-) or (*) *: v3 is marked at different position on the relay e.g.: ordering code: js-12e-k actual mar king: js12e-k power relay 1 pole - 8a medium load control js series n partnumber information js - 12 m e - k t - v3 * [example] (a) (b) (c) (d) (e) (f ) (g) (a) r elay type js : js-ser ies (b) coil r ated voltage 12 : 5.....60 vdc coil r ating table at page 3 (c) cont act confguration nil : 1 f orm c (spdt) m : 1 f orm a (spst-no) (d) cont act material nil : gold plat e silver cadmium oxide d : sil ver nickel e : sil ver cadmium oxide f : gold plat e silver nickel n : gold plat e silver tin oxide (e) enclosur e k : plas tic sealed type (f) cons truction nil : 3.2mm t : 5.0mm (onl y js-mn) (g) gold plating nil : 0.3 gold o verlay (available with nil, n and f contact) v3 : 3.0 gold o verlay for lower current applications (available with nil and n cont act, not available for t, 5.0mm type)
2 ftr-k1 series n specification * minimum switching loads mentioned above are reference values. please perform the confrmation test with actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. js series item non v3 type v3 type js - ( ) - k js - ( ) d/e/f/n - k js - ( ) - k js - ( ) n - k contact data confguration 1 form a (spst-no), 1 form c (spdt) construction single material (see part number information) 0.3 au plated 3 au plated resistance (initial) max. 100 m at 6vdc, 1a max. 30 m at 6vdc, 1a contact rating 8a, 250vac / 24vdc max. carrying current 10a max. switching voltage 400vac / 150vdc max. switching power 2,000va / 192w min. switching load * 100ma, 5vdc 10ma, 5vdc life mechanical min. 20 x 10 6 operations electrical ac contact rating (resistive load) min. 100 x 10 3 operations (agcd) min. 50 x 10 3 operations (agsno 2 ) min. 20 x 10 3 operations (agni) dc contact rating (resistive load) min. 100 x 10 3 operations (agcd) min. 50 x 10 3 operations (agsno 2 ) min. 20 x 10 3 operations (agni) coil data rated power (at 20 c) 220 - 290mw operate power (at 20 c) 110 - 140mw operating temperature range -40 c to +85 c (no frost) timing data operate (at nominal voltage) max. 10ms (no bounce) release (at nominal voltage) max. 5ms (no diode, no bounce) insulation resistance (initial) min. 1,000m at 500vdc dielectric strength open contacts 1,000vac (50/60hz) 1min contacts to coil 5,000vac (50/60hz) 1min surge strength coil to contacts 10,000v / 1.2 x 50s standard wave clearance 8 mm creepage 8 mm en61810-1, vde0435 voltage 250v pollution degree 3 material group iii a category c / 250v (reference voltage) (vde 01106) other vibration resistance misoperation>1us 10 - 55 - 10 hz double amplitude 1.65mm endurance 10 - 55 - 10 hz double amplitude 3.3mm shock misoperation>1us min. 100m/s2 (11 1ms) 3 directions; 36 shocks (18 with coil energizing, 18 no coil energizing) endurance min. 1,000m/s2 (6 1ms) 3 directions, no coil energizing 18 shocks weight approximately 8.0 g
3 ftr-k1 series n coil rating js series coil code rated coil voltage (vdc) coil resistance +/- 10% (ohm) must operate voltage (vdc) * must release voltage (vdc) * max. coil voltage (vdc) rated power (mw) 5 5 112 3.5 0.5 11.8 225 6 6 160 4.2 0.6 14.1 9 9 360 6.3 0.9 21.2 12 12 660 8.5 1.2 28.3 220 18 18 1,455 12.7 1.8 42.4 225 24 24 2,350 16.8 2.4 56.6 245 48 48 8,000 33.4 4.8 105.6 290 60 60 12,500 41.7 6.0 132.0 n safety standards also complies with sev, ?ve, fimko, bsi, cqc, nemko, demko note: all values in the table are valid for 20c and zero contact current. * specifed operate values are valid for pulse wave voltage. type compliance contact rating ul ul 508 e 56140 flammability: ul 94-v0 (plastics) contact material: nil, e n d, f 8a 24vdc (resistive) 100k 8a, 250vac (resistive) 100k 10a, 30vdc (resistive) 10a, 250vac (resistive) 1/4hp, 125vac / 250vac 1/3hp, 125vac 1/2hp, 250vac pilot duty: c150, b300 pilot duty: 0.27a, 250vdc 8a 24vdc (resistive) 100k 8a, 250vac (resistive) 100k 10a, 30vdc (resistive) 10a, 250vac (resistive) 1/4hp, 125vac / 250vac 1/3hp, 125vac 1/2hp, 250vac pilot duty: a300, b300 c150, r300 8a, 24vdc 8a, 250vac csa c22.2 no. 14 lr 35579 vde 0435, 0631, 0700, 40013847 8a 250vac (cos =1) 8a 24vdc (0 ms) js-( )d-k, js-( )f-k: 6a, 250vac, (cos =1) js-( )md-k, js-( )mf-k: 8a, 250vac semko en 61058-1 + a1: 1993 en 61095:1993 + a11 rated voltage (v): 250 rated current (a): 8 (2) or 8 - -
4 ftr-k1 series n characteristic data js series
5 ftr-k1 series js series n dimensions js-mk l dimensions l schematics js-k l dimensions l pc board mounting hole layout (bottom view) l schematics js-mn-kt l dimensions l schematics l pc board mounting hole layout (bottom view) l pc board mounting hole layout (bottom view) unit: mm
6 ftr-k1 series js series 1. general information l all signal and power relays produced by fujitsu components are compliant with rohs directive 2002/95ec including amendments. l cadmium as used in electrical contacts is exempted from the rohs directives on october 21st, 2005. (ame ndment to directive 2002/95/ec) l all of our signal and power relays are lead-free. please refer to lead-free status info for older date codes at : http://www.fujitsu.com/us/downloads/micro/fcai/relays/lead-free-letter.pdf l lead free solder plating on relay terminals is sn-3.0ag-0.5cu, unless otherwise specified. this mat erial has been verified to be compatible with pbsn assembly process. 2. recommended lead free solder profile l recommended solder sn-3.0ag-0.5cu. rohs compliance and lead free information 3. moisture sensitivity l moisture sensitivity level standard is not applicable to electromechanical relays, unless otherwise indicated. 4. tin whiskers l dipped snagcu solder is known as presenting a low risk to tin whisker development. no considerable length whisk er was found by our in house test. we highly recommend that you confrm your actual solder conditions flow solder condition: pre-heating: maximum 120?c soldering: dip within 5 sec. at 260?c solder bath solder by soldering iron: soldering iron temperature: maximum 360?c duration: maximum 3 sec.
7 ftr-k1 series fujitsu components international headquarter offces js series japan fujitsu component limited gotanda-chuo building 3-5, higashigotanda 2-chome, shinagawa-ku tokyo 141, japan tel: (81-3) 5449-7010 fax: (81-3) 5449-2626 email: promothq@ft.ed.fujitsu.com web: www.fcl.fujitsu.com north and south america fujitsu components america, inc. 250 e. caribbean drive sunnyvale, ca 94089 u.s.a. tel: (1-408) 745-4900 fax: (1-408) 745-4970 email: components@us.fujitsu.com web: http://us.fujitsu.com/components europe fujitsu components europe b.v. diamantlaan 25 2132 wv hoofddorp netherlands tel: (31-23) 5560910 fax: (31-23) 5560950 email: info@fceu.fujitsu.com web: emea.fujitsu.com/components/ asia pacifc fujitsu components asia ltd. 102e pasir panjang road #01-01 citilink warehouse complex singapore 118529 tel: (65) 6375-8560 fax: (65) 6273-3021 email: fcal@fcal.fujitsu.com web: http://www.fujitsu.com/sg/services/micro/components/ ?2012 fujitsu components europe b.v. all rights reserved. all trademarks or registered trademarks are the property of their respective owners. the contents, data and information in this datasheet are provided by fujitsu component ltd. as a service only to its user and only for general information purposes. the use of the contents, data and information provided in this datasheet is at the users own risk. fujitsu has assembled this datasheet with care and will endeavor to keep the contents, data and information correct, accurate, comprehensive, complete and up to date. fujitsu components europe b.v. and affliated companies do however not accept any responsibility or liability on their behalf, nor on behalf of its employees, for any loss or damage, direct, indirect or consequential, with respect to this datasheet, its contents, data, and information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. nor do fujitsu components europe b.v. and affliated companies accept on their behalf, nor on behalf of its employees, any responsibility or liability for any representation or warrant of any kind, express or implied, including warranties of any kind for merchantability or ftness for particular use, with respect to these datasheets, its contents, data, information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. rev. march 23, 2012
|
