unit: mm 1 gaas mmics 1.5 0.1 5.5 0.3 6.5 0.3 0.05 0.04 0 to 0.1 0.5 0.2 + 0.1 - 0 10-0.4 0.1 4-0.9 0.1 2.0 0.2 1.2 0.2 0.5 0.2 7.7 0.3 0.8 1 5 10 6 45? 12? 6? 12? 6? 2.2 0.2 1: v gg1 2: gnd 3: v gg2 4: gnd 5: v dd2 6: p out 7: gnd 8: v dd1 9: gnd 10: p in so-10 package GN05009N gaas ic transmitting amplifier for phs base station other communication equipment n features l high output power amplifier (p out = 25.5dbm) l low consumption current (i dd max. 420ma) l small surface mount package n absolute maximum ratings (ta = 25c) parameter power supply voltage gate voltage circuit current input power operating temperature storage temperature symbol v dd1 v dd2 v gg1 v gg2 i dd1 i dd2 p in t opr t stg ratings 6 6 - 5 - 5 0.12 0.36 7 - 20 to +90 - 30 to +120 unit v v v v a a dbm c c n electrical characteristics (ta = 25 3c) * 1 parameter circuit current * 2, 5 gate current * 3, 5 power gain * 5, 6 modulation distortion * 5, 6 modulation distortion * 5, 7 voltage standing wave ratio * 5, 7 harmonics output ratio * 4, 5, 7 conditions v dd1 = v dd2 = 4.8v, p out = 25.5dbm v dd1 = v dd2 = 4.8v, p out = 25.5dbm v dd1 = v dd2 = 4.8v, p out = 25.5dbm v dd1 = v dd2 = 4.8v, p out = 25.5dbm 600khz detuning, 192khz bandwidth v dd1 = v dd2 = 4.8v, p out = 25.5dbm 900khz detuning, 192khz bandwidth v dd1 = v dd2 = 4.8v, p out = 25.5dbm v dd1 = v dd2 = 4.8v, p out = 25.5dbm min 22 typ max 420 3 30 - 56 - 60 3 - 35 unit ma ma db dbc dbc dbc symbol i dd i gg pg dm 1 dm 2 vswrin * 1 common conditions: f = 1895.15 to 1917.95mhz, duty = 1/2 (t = 5ms), ta = 25c * 2 i dd = i dd1 + i dd2 * 3 current flowing through the gate pin in the measurement circuit diagram. * 4 2nd (2fo), 3rd (3fo), and 4th (4fo) harmonics * 5 v gg is the voltage which adjusts i dd to 0.15a when p in is off. p out is the average output power of p /4 shifted qpsk wave. * 6 sampling inspection items (n = 10/wafer) (c = 0) * 7 design-guaranteed items. 1) about the stability of the load regulation, no abnormal oscillation and no noise increase are caused under following conditions : condition: v dd1 = v dd2 = 3.5 to 5v, v gg = (*1), p in = - 25 to +7dbm, load vswr 3, full phase 2) about the damage capacity, no damage should be caused under following conditions: condition: v dd1 = v dd2 = 0 to 5.2v, v gg = (*1), p in = - 25 to +7dbm, load vswr 3, full phase, t < 10s maintenance/ discontinued maintenance/discontinued includes following four product lifecycle stage. planed maintenance type maintenance type planed discontinued typed discontinued type please visit following url about latest information. http://www.semicon.panasonic.co.jp/en/
gaas mmics 2 GN05009N p out (adj), dm1 ? p in i opr ? f pg ? f acp ? f n measurement circuit circuit-function block diagram 12345 10 9 8 7 6 GN05009N c2 c3 c1 c1 l2 p in c1 c1 r2 r1 c3 l1 l2 v dd1 v gg v dd2 p out ?0.0 10.0 0 5.0 ?.0 10.0 30.0 25.0 15.0 20.0 ?0.0 0 ?0.0 ?0.0 ?0.0 p out =25.5dbm 61dbc i dd =380ma input voltage p in ( dbm ) output power p out ( dbm ) adjacent channel leakage power ( acp ) ( 600khz ) dm1 ( dbc ) 1895 1918 1906 330 380 370 360 350 340 v dd :4.8v idol current:380ma frequency f ( mhz ) operating current i opr ( ma ) 1895 1918 1906 22 27 26 25 24 23 v dd :4.8v idol current:380ma frequency f ( mhz ) power gain pg ( db ) 1895 1918 1906 ?7 ?5 ?3 ?9 ?1 v dd :4.8v idol current:380ma frequency f ( mhz ) adjacent channel leakage power ( acp ) ( dbc ) (component values) r1 = 560 w l1 = 8.2nh c1 = 100pf, 10 m f r2 = 1.8k w l2 = 5.6nh c2 = 1pf c3 = 100pf 1 10 8 3 6 5 7 9 24 maintenance/ discontinued maintenance/discontinued includes following four product lifecycle stage. planed maintenance type maintenance type planed discontinued typed discontinued type please visit following url about latest information. http://www.semicon.panasonic.co.jp/en/
request for your special attention and precautions in using the technical information and semiconductors described in this book (1) if any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially, those with regard to security export control, must be observed. (2) the technical information described in this book is intended only to show the main characteristics and application circuit examples of the products, and no license is granted under any intellectual property right or other right owned by our company or any other company. therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other company which may arise as a result of the use of technical information described in this book. (3) the products described in this book are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). consult our sales staff in advance for information on the following applications: ? special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod- ucts may directly jeopardize life or harm the human body. ? any applications other than the standard applications intended. (4) the products and product specifications described in this book are subject to change without notice for modification and/or im- provement. at the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date product standards in advance to make sure that the latest specifications satisfy your requirements. (5) when designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions (operating power supply voltage and operating environment etc.). especially, please be careful not to exceed the range of absolute maximum rating on the transient state, such as power-on, power-off and mode-switching. otherwise, we will not be liable for any defect which may arise later in your equipment. even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (6) comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (esd, eos, thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. when using products for which damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages. (7) this book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of matsushita electric industrial co., ltd. caution for safety danger this product contains gallium arsenide (gaas). gaas powder and vapor are hazardous to human health if inhaled or ingested. do not burn, destroy, cut, cleave off, or chemically dissolve the product. follow related laws and ordinances for disposal. the product should be excluded from general industrial waste or household garbage. if you have any inquiries or questions about this book or our semiconductor products, please contact one of our sales offices listed on the back or semiconductor company's department. maintenance/ discontinued maintenance/discontinued includes following four product lifecycle stage. planed maintenance type maintenance type planed discontinued typed discontinued type please visit following url about latest information. http://www.semicon.panasonic.co.jp/en/
|
