91813 tkim tc-00003013 no. a2209-1/6 http://onsemi.com semiconductor components industries, llc, 2013 september, 2013 tig074e8 n-channel igbt 400v, 150a, v ce (sat); 3.8v single ech8 features ? low-saturation voltage ? low voltage drive (2.5v) ? enhansment type ? built-in gate to emitter protection diode ? mounting height 0.9mm, mounting area 8.12mm 2 ? dv / dt guarantee * ? halogen free compliance application ? light-controlling flash applications speci cations absolute maximum ratings at ta=25c parameter symbol conditions p-channel unit collector to emitter voltage v ces 400 v gate to emitter voltage (dc) v ges 4 v gate to emitter voltage (pulse) v ges pw 1ms 5 v collector current (pulse) i cp v ge =2.5v, c m =200 f 150 a maximum collector to emitter dv / dt dv / dt turn off i c =150a, v ce 320v, starting tch=25 c 400 v / s channel temperature tj 150 c storage temperature tstg -40 to +150 c * : concerning dv / dt (slope of collector voltage at the time of turn-off), will be 100% screen-detected in the circuit shown a s fig. 1. electrical characteristics at ta=25c parameter symbol conditions ratings unit min typ max collector to emitter breakdown voltage v (br)ces i c =2ma, v ge =0v 400 v collector to emitter cutoff current i ces v ce =320v, v ge =0v 10 a gate to emitter leakage current i ges v ge =4v, v ce =0v 10 a gate to emitter threshold voltage v ge (off) v ce =10v, i c =1ma 0.4 0.9 v collector to emitter saturation voltage v ce (sat) i c =100a, v ge =2.5v 3.8 5.4 v input capacitance cies v ce =10v, f=1mhz 3100 pf output capacitance coes 32 pf reverse transfer capacitance cres 24 pf ordering number : ena2209 stresses exceeding maximum ratings may damage the device. maximum ratings are stress ratings only. functional operation above t he recommended operating conditions is not implied. extended exposure to stresses above the recommended operating conditions may affect device reliabili ty. ordering information see detailed ordering and shipping information on page 5 of this data sheet.
tig074e8 no. a2209-2/6 i c -- v ce collector to emitter voltage, v ce -- v collector current, i c -- a i c -- v ge gate to emitter voltage, v ge -- v collector current, i c -- a it15154 0 0 25 50 75 125 100 150 it15155 0 0 12 5 7 69 8 34 10 25 50 75 125 100 150 1.0 1.5 0.5 2.0 3.0 2.5 4.0 3.5 v ge =4.0v 3.0v 2.5v v ce =10v 1.8v 25 c 75 c tc= --25 c tc=25 c case temperature, tc -- c gate to emitter cutoff voltage, v ge (off) -- v v ge (off) -- tc collector to emitter voltage, v ce -- v v ce -- v ge gate to emitter voltage, v ge -- v case temperature, tc -- c v ce (sat) -- tc collector to emitter saturation voltage, v ce (sat) -- v collector to emitter voltage, v ce -- v v ce -- v ge gate to emitter voltage, v ge -- v collector to emitter voltage, v ce -- v v ce -- v ge gate to emitter voltage, v ge -- v 130a it15159 05075 100 125 150 25 --25 --50 6 5 8 7 9 10 4 3 2 i c =150a v ge =2.5v 4 3 2 it15156 it15158 1.0 1.5 10 9 8 7 6 5 2.0 3.0 2.5 3.5 4.0 4.5 5.0 130a 100a tc= --25 c i c =150a 4 3 2 it15157 1.0 1.5 10 9 8 7 6 5 2.0 3.0 2.5 3.5 4.0 4.5 5.0 130a 100a tc=25 c i c =150a 100a it15160 0 50 75 100 125 150 25 --25 --50 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 4 3 2 1.0 1.5 10 9 8 7 6 5 2.0 3.0 2.5 3.5 4.0 4.5 5.0 130a 100a tc= 75 c i c =150a v ce =10v i c =1ma gate to emitter voltage, v ge -- v collector current (pulse), i cp -- a i cp -- v ge it15165 1.5 2.0 3.5 5.0 4.5 3.0 4.0 5.5 2.5 1.0 0.5 0 0 20 40 60 80 100 120 140 180 160 v ce =320v c m =100 f tc=25 c tc=70 c
tig074e8 no. a2209-3/6 collector current (pulse), i cp -- a main capacitance, c m -- f c m -- i cp 20 40 60 80 100 120 140 0 160 50 0 100 150 200 250 300 350 400 450 v ge =2.5v v ce =320v tc=25 c tc=70 c it17156 fig.1 large current r load switching circuit note1. the collector voltage gradient dv / dt - turn off ic safety movement domain to protect the device of gate-series resistor rg when it is turned off. 100k c m r l r g v cc + tig074e8 v ge
tig074e8 no. a2209-4/6 de nition of dv/dt dv/dt is de ned as the maximum slope of the below v ce curve during turn-off period. dv/dt= v ce / t= v ce /100ns overall waveform enlarged picture of turn-off period de nition of switching time v ge v ce i c v ge :10% v ce :90% v ge :90% v ce :10% v ce :10% t d (on) t d (off) t r t f i c :90% i c :10% it15324 t t t v,i v ce i c i cp turn off i c t turn-off period t=100ns i c v ce v ce it15323 turn off v ce
tig074e8 no. a2209-5/6 0.4 0.6 2.8 0.65 package dimensions TIG074E8-TL-H sot-28fl/ech8 case 318bf issue o unit : mm 1: emitter 2: emitter 3: emitter 4: gate 5: collector 6: collector 7: collector 8: collector land pattern example ordering & package information device package shipping memo TIG074E8-TL-H ech8 3,000 pcs./reel pb-free and halogen free packing type: tl marking electrical connection 87 6 5 12 3 4 tl zf lot no.
tig074e8 ps no. a2209-6/6 note on usage : tig074e8 has protection diode between gate and emitter but handling it requires suf cient care to be taken. on semiconductor and the on logo are registered trademarks of semiconductor components industries, llc (scillc). scillc owns th e rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. a listing of scillc?s product/patent covera ge may be accessed at www.onsemi.com/site/pdf/patent-marking.pdf. scillc reserves the right to make changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does scillc ass ume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation sp ecial, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/or specifications can and do vary in different ap plications and actual performance may vary over time. all operating parameters, including ?typicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life , or for any other application in which the failure of the scillc product could create a situation where personal injury or death may occur. should buyer purchas e or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its officers, employees, subsidiarie s, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the d esign or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws a nd is not for resale in any manner.
|
