filename: tfs 1668.doc version 1.6 07.01.2014 vectron international filter specification tfs 1668 1/5 vectron international gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh reserves the right to ma ke changes to the product(s) and/or information con tained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. measurement condition ambient temperature: 23 c input power level: 0 dbm terminating impedance: * input: 49,53 || -1,0 pf output: 49,53 || -1,0 pf characteristics remark: the maximum attenuation in the pass band is defined as the insertion loss a e . the nominal frequency f n is fixed at 1668,3 mhz without any tolerance or li mit. the values of absolute attenuation a abs are guaranteed for the whole operating temperature range. the frequency shift of the filter in the op erating temperature range is included in the production tol erance scheme. d a t a typ. value tolerance / limit insertion loss a e 3,5 db max. 4,5 db nominal frequency f n - 1668,3 mhz passband 89 mhz f n 37,5 mhz absolute attenuation a abs 1 mhz ... 1500 mhz 30 db min. 28,5 db 1500 mhz ... 1550 mhz 26 db min. 20 db 1790 mhz ... 2000 mhz 20,5 db min. 18,5 db input power level wilthin pb - max. 7 dbm return loss within pb 10 db min. 7 db operating temperature range otr - - 30 c ... + 85 c storage temperature range - - 40 c ... + 85 c temperature coefficient of frequency tc f ** - 40 ppm/k - *) the terminating impedances depend on parasitics and q-values of matching elements and the board use d, and are to be understood as reference values only. should there be additional questions do not h esitate to ask for an application note or contact o ur design team. **) ? f(hz) = tc f (ppm/k) x (t-t 0 ) x f to (mhz). generated: checked / approved:
filename: tfs 1668.doc version 1.6 07.01.2014 vectron international filter specification tfs 1668 2/5 vectron international gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh reserves the right to ma ke changes to the product(s) and/or information con tained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. filter characteristic construction and pin connection (all dimensions in mm) 1 2 3 4 5 6 1,2 max. 0,6 0,75 3 ,0 +/-0,15 0,6 0,30x0,30 1 3 6 4 date code 50 ? matching network 1, 3, 4, 6 l1 l2 5 2 h68 e02 1 input rf return 2 input 3 ground 4 output rf return 5 output 6 ground date code: year + week e 2014 f 2015 g 2016 ... 1533 1560 1587 1614 1641 1668 1695 1722 1749 1776 1803 -40 -36 -32 -28 -24 -20 -16 -12 -8 -4 0 frequency in mhz magnitude in db 1618 1628 1638 1648 1658 1668 1678 1688 1698 1708 1718 -10 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 frequency in mhz magnitude in db 1618 1628 1638 1648 1658 1668 1678 1688 1698 1708 1718 -0.038 0.01 0.058 0.106 0.154 0.202 0.25 0.298 0.346 0.394 0.442 frequency in mhz delay in s
filename: tfs 1668.doc version 1.6 07.01.2014 vectron international filter specification tfs 1668 3/5 vectron international gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh reserves the right to ma ke changes to the product(s) and/or information con tained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. stability characteristics, reliability after the following tests the filter shall meet the whole specification: 1. shock: 500g, 1 ms, half sine wave, 3 shocks each plane; din iec 68 t2 - 27 2. vibration: 10 hz to 500 hz, 0.35 mm or g respec tively, 1 octave per min, 10 cycles per plane, 3 planes; din iec 68 t2 - 6 3. change of temperature: -55 c to 125c / 15 min. each / 1 00 cycles din iec 68 part 2 ? 14 test n 4. resistance to solder heat (reflow): reflow possible: three ti mes max.; for temperature conditions, see page 4: "air reflo w temperature conditions" 5. esd ansi/esd s20.20-1999 , class 1a for hbm this filter is rohs compliant (2011/65/eu) packing tape & reel: iec 286 ? 3, with exception of value f or n and minimum bending radius; tape type ii, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: 9000 reel of empty components at start: min. 300 mm reel of empty components at start including leader : min. 500 mm trailer: min. 300 mm g do w ct f e g d1 p2 p1 po bo ao pull off direction pin marker typ date code ko t a c n w 1 w 2 the minimum bending radius is 45 mm. tape (all dimensions in mm) w : 8,00 0,3 po : 4,00 0,1 do : 1,50 +0,1/-0 e : 1,75 0,1 f : 3,50 0,05 g(min) : 0,75 p2 : 2,00 0,05 p1 : 4,00 0,1 d1(min) : 1,50 ao : 3,25 0,1 bo : 3,25 0,1 ct : 5,5 0,1 reel (all dimensions in mm) a : 330 w1 : 8,4 +1,5/-0 w2(max) : 14,4 n(min) : 50 c : 13,0 +0,5/-0,2
filename: tfs 1668.doc version 1.6 07.01.2014 vectron international filter specification tfs 1668 4/5 vectron international gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh reserves the right to ma ke changes to the product(s) and/or information con tained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. air reflow temperature conditions conditions exposure average ramp-up rate (30c to 217c) less than 3c/ second > 100c between 300 and 600 seconds > 150c between 240 and 500 seconds > 217c between 30 and 150 seconds peak temperature max. 260c time within 5c of actual peak temperature between 10 and 30 seconds cool-down rate (peak to 50c) less than 6c/second time from 30c to peak temperature no greater than 300 seconds temperature / c time / s max. 260c 217c 10 ... 30 s 30 ... 150 s max. 300 s chip-mount air reflow profile
filename: tfs 1668.doc version 1.6 07.01.2014 vectron international filter specification tfs 1668 5/5 vectron international gmbh potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@vectron.com vectron international gmbh reserves the right to ma ke changes to the product(s) and/or information con tained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. history version reason of changes name date 1.0 - generation of specification according to cust omer requirements. roizengaft 16.02.2004 1.1 - add of matching network roizengaft 25.02.2004 1.2 - change of value in the rejection from absolu te to relative roizengaft 05.03.2004 1.3 - change of definition of rejection back to abs olute strehl 09.09.2005 - add typical values and filter characteristic - generation of filter specification 1.4 - terminating impedance corrected pfeiffer 25.02.2008 - limits of insertion loss and return loss changed - filter characteristics updated 1.5 - package drawing corrected pfeiffer 22.10.2008 1.6 - maximum input power updated kortenbeutel 07.01.2014
|
