cystech electronics corp. spec. no. : c936j3 issued date : 2013.12.09 revised date : page no. : 1/9 MTED6N25KJ3 cystek product specification ln-channel enhancement mode power mosfet MTED6N25KJ3 features ? esd protected ? low gate charge ? fast switching characteristic ? simple drive requirement ? pb-free lead plating and halogen-free package equivalent circuit outline ordering information device package shipping MTED6N25KJ3-0-t3-g to-252 (pb-free lead plating an d halogen-free package) 2500 pcs / tape & reel MTED6N25KJ3 to-252(dpak) bv dss 250v i d @ v gs =10v 8a v gs =10v, i d =5a 422m r dson(typ) v gs =6v, i d =3a 399m g d s g gate d drain ssource environment friendly grade : s for rohs compliant products, g for rohs compliant and green compound products packing spec, t3 : 2500 pc s / tape & reel, 13? reel product rank, zero for no rank products product name
cystech electronics corp. spec. no. : c936j3 issued date : 2013.12.09 revised date : page no. : 2/9 MTED6N25KJ3 cystek product specification absolute maximum ratings (t c =25 c, unless otherwise noted) parameter symbol limits unit drain-source voltage v ds 250 gate-source voltage v gs 20 v continuous drain current @ v gs =10v, t c =25 c (note 1) 8 continuous drain current @ v gs =10v, t c =100 c (note 1) 5 continuous drain current @ v gs =10v, t a =25 c (note 2) 1.5 continuous drain current @ v gs =10v, t a =70 c (note 2) i d 1.2 pulsed drain current (note 3) i dm 16 avalanche current (note 3) i as 2 a avalanche energy @ l=50mh, i d =2a, v dd =50v (note 2) e as 100 repetitive avalanche energy@ l=0.1mh (note 3) e ar 2 mj total power dissipation @t c =25 (note 1) 78 total power dissipation @t c =100 (note 1) p d 21 total power dissipation @t a =25 (note 2) 2.5 total power dissipation @t a =70 (note 2) p dsm 1.6 w operating junction and storage te mperature range tj, tstg -55~+150 c thermal data parameter symbol value unit thermal resistance, junction-to-case, max r th,j-c 1.6 c/w thermal resistance, junction-to-ambient, max (note 2) r ja 50 c/w thermal resistance, junction-to-ambient, max (note 4) r ja 110 c/w note : 1 . the power dissipation p d is based on t j(max) =150 c, using junction-to-case thermal resistance, and is more useful in setting the upper dissipation limit for cases where additional heatsinking is used. 2 . the value of r ja is measured with the device mounted on 1 in 2 fr-4 board with 2 oz. copper, in a still air environment with t a =25 c. the power dissipation p dsm is based on r ja and the maximum allowed junction temperature of 150 c. 3 . repetitive rating, pulse width limited by junction temperature t j(max) =150 c. ratings are based on low frequency and low duty cycles to keep initial t j =25 c. 4. when mounted on the minimum pad size recommended (pcb mount), t 10s.
cystech electronics corp. spec. no. : c936j3 issued date : 2013.12.09 revised date : page no. : 3/9 MTED6N25KJ3 cystek product specification characteristics (tc=25 c, unless otherwise specified) symbol min. typ. max. unit test conditions static bv dss 250 - - v v gs =0v, i d =250 a v gs(th) 2 2.4 4 v v ds =v gs , i d =250 a i gss - - 10 v gs = 20v, v ds =0v - - 1 v ds =200v, v gs =0v i dss - - 25 a v ds =200v, v gs =0v, t j =125c - 422 550 v gs =10v, i d =5a r ds(on) *1 - 399 530 m v gs =6v, i d =3a g fs *1 - 2.4 - s v ds =40v, i d =1.5a dynamic qg *1, 2 - 7.5 - qgs *1, 2 - 2.7 - qgd *1, 2 - 2 - nc v ds =200v, i d =1.5a, v gs =10v t d(on) *1, 2 - 15 - tr *1, 2 - 12 - t d(off) *1, 2 - 42 - t f *1, 2 - 20 - ns v ds =125v, i d =1.5a, v gs =10v, r g =25 ciss - 533 - coss - 43 - crss - 18 - pf v gs =0v, v ds =25v, f=1mhz source-drain diode i s *1 - - 8 i sm *3 - - 16 a v sd *1 - 0.73 1 v i s =1a, v gs =0v trr - 80 - ns qrr - 290 - nc i f =1.5a, di f /dt=100a/ s note : *1.pulse test : pulse width 300 s, duty cycle 2% *2.independent of operating temperature *3.pulse width limited by maximum junction temperature.
cystech electronics corp. spec. no. : c936j3 issued date : 2013.12.09 revised date : page no. : 4/9 MTED6N25KJ3 cystek product specification typical characteristics typical output characteristics 0 2 4 6 8 10 12 0369121 5 brekdown voltage vs ambient temperature 0.4 0.6 0.8 1 1.2 1.4 -75 -50 -25 0 25 50 75 100 125 150 175 tj, junction temperature(c) bv dss , normalized drain-source breakdown voltage i d =250 a, v gs =0v v ds , drain-source voltage(v) i d , drain current (a) 10v,9v,8v,7v,6v,5v v gs =4v static drain-source on-state resistance vs drain current 100 1000 10000 0.01 0.1 1 10 100 i d , drain current(a) r ds(on) , static drain-source on-state resistance(m) v gs =4.5v v gs =10v v gs =6v reverse drain current vs source-drain voltage 0.2 0.4 0.6 0.8 1 1.2 024681 i dr , reverse drain current(a) v sd , source-drain voltage(v) 0 tj=25c tj=150c v gs =0v static drain-source on-state resistance vs gate-source voltage 200 400 600 800 1000 1200 1400 024681 0 drain-source on-state resistance vs junction tempearture 0 0.5 1 1.5 2 2.5 3 -65 -35 -5 25 55 85 115 145 175 tj, junction temperature(c) r ds(on) , normalized static drain- source on-state resistance v gs =10v, i d =5a r ds( on) @tj=25c : 422m v gs , gate-source voltage(v) r ds(on) , static drain-source on- state resistance(m) i d =5a
cystech electronics corp. spec. no. : c936j3 issued date : 2013.12.09 revised date : page no. : 5/9 MTED6N25KJ3 cystek product specification typical characteristics(cont.) capacitance vs drain-to-source voltage 10 100 1000 0.1 1 10 100 v ds , drain-source voltage(v) capacitance---(pf) c oss ciss crss threshold voltage vs junction tempearture 0.4 0.6 0.8 1 1.2 1.4 -65 -35 -5 25 55 85 115 145 175 tj, junction temperature(c) v gs(th) , normalized threshold voltage i d =250 a i d =1ma forward transfer admittance vs drain current 0.01 0.1 1 10 0.001 0.01 0.1 1 10 i d , drain current(a) g fs , forward transfer admittance(s) ta=25c pulsed v ds =40v gate charge characteristics 0 2 4 6 8 10 0246810 qg, total gate charge(nc) v gs , gate-source voltage(v) v ds =200v i d =3a maximum safe operating area 0.01 0.1 1 10 100 0.1 1 10 100 1000 v ds , drain-source voltage(v) i d , drain current(a) t c =25c, tj=150c v gs =10v, jc =1.6c/w single pulse dc 100ms r dson limited 1s 100 s 1ms 10ms maximum drain current vs case temperature 0 1 2 3 4 5 6 7 8 9 10 25 50 75 100 125 150 175 t c , case temperature(c) i d , maximum drain current(a) v gs =10v, r jc =1.6c/w
cystech electronics corp. spec. no. : c936j3 issued date : 2013.12.09 revised date : page no. : 6/9 MTED6N25KJ3 cystek product specification typical characteristics(cont.) typical transfer characteristics 0 2 4 6 8 10 12 14 0246810 v gs , gate-source voltage(v) i d , drain current(a) v ds =10v single pulse power rating, junction to case 0 100 200 300 400 500 600 700 800 900 1000 0.001 0.01 0.1 1 10 100 pulse width(s) power (w) t j(max) =150c t c =25c jc =1.6c/w transient thermal response curves 0.001 0.01 0.1 1 1.e-04 1.e-03 1.e-02 1.e-01 1.e+00 1.e+01 1.e+02 1.e+03 t 1 , square wave pulse duration(s) r(t), normalized effective transient thermal resistance single pulse 0.01 0.02 0.05 0.1 0.2 d=0.5 1.r jc (t)=r(t)*r jc 2.duty factor, d=t 1 /t 2 3.t jm -t c =p dm *r jc (t) 4.r jc =1.6c/w recommended soldering footprint
cystech electronics corp. spec. no. : c936j3 issued date : 2013.12.09 revised date : page no. : 7/9 MTED6N25KJ3 cystek product specification reel dimension carrier tape dimension
cystech electronics corp. spec. no. : c936j3 issued date : 2013.12.09 revised date : page no. : 8/9 MTED6N25KJ3 cystek product specification recommended wave soldering condition product peak temperature soldering time pb-free devices 260 +0/-5 c 5 +1/-1 seconds recommended temperature profile for ir reflow profile feature sn-pb eutectic assembly pb-free assembly average ramp-up rate (tsmax to tp) 3 c/second max. 3 c/second max. preheat ? temperature min(t s min) ? temperature max(t s max) ? time(ts min to ts max ) 100 c 150 c 60-120 seconds 150 c 200 c 60-180 seconds time maintained above: ? temperature (t l ) ? time (t l ) 183 c 60-150 seconds 217 c 60-150 seconds peak temperature(t p ) 240 +0/-5 c 260 +0/-5 c time within 5 c of actual peak temperature(tp) 10-30 seconds 20-40 seconds ramp down rate 6 c/second max. 6 c/second max. time 25 c to peak temperature 6 minutes max. 8 minutes max. note : all temperatures refer to topside of t he package, measured on the package body surface.
cystech electronics corp. spec. no. : c936j3 issued date : 2013.12.09 revised date : page no. : 9/9 MTED6N25KJ3 cystek product specification to-252 dimension marking: device nam e date code ed6 n25k 1 2 3 4 style: pin 1.gate 2.drain 3.source 4.drain 3-lead to-252 plastic surface mount package cystek package code: j3 inches millimeters inches millimeters dim min. max. min. max. dim min. max. min. max. a 0.087 0.094 2.200 2.400 e 0.086 0.094 2.186 2.386 a1 0.000 0.005 0.000 0.127 e1 0.172 0.188 4.372 4.772 b 0.039 0.048 0.990 1.210 h 0.163 ref 4.140 ref b 0.026 0.034 0.660 0.860 k 0.190 ref 4.830 ref b1 0.026 0.034 0.660 0.860 l 0.386 0.409 9.800 10.400 c 0.018 0.023 0.460 0.580 l1 0.114 ref 2.900 ref c1 0.018 0.023 0.460 0.580 l2 0.055 0.067 1.400 1.700 d 0.256 0.264 6.500 6.700 l3 0.024 0.039 0.600 1.000 d1 0.201 0.215 5.100 5.460 p 0.026 ref 0.650 ref e 0.236 0.244 6.000 6.200 v 0.211 ref 5.350 ref notes: 1.controlling dimension: millimeters. 2.maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material. 3.if there is any question with packing specification or packing method, please c ontact your local cystek sales office. material: ? lead : pure tin plated. ? mold compound: epoxy resin family, flammability solid burning class: ul94v-0. important notice: ? all rights are reserved. reproduction in whole or in part is prohibited without the prior written approval of cystek. ? cystek reserves the right to make changes to its products without notice. ? cystek semiconductor products are not warranted to be suitable for use in life-support applications, or systems. ? cystek assumes no liability for any consequence of customer pr oduct design, infringement of pat ents, or application assistance .
|
