Part Number Hot Search : 
B102S XFGIB100 4HC404 56F83 56F83 6601C 56F83 SM8S24A
Product Description
Full Text Search
 

To Download TG220111 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  page 1 of 14 tg.22.0111 specifcation part no. tg.22.0111 product name penta-band cellular connector mount gsm-dcs-pcs-umts-cdma-gprs-edge-hspa 800mhz ~2200 mhz feature 0dbi gain straight sma male, 50 ohms rohs compliant close-up of connector and pin spe-11-8-109/e/ss |
page 2 of 14 the tg.22.0111, penta-band gsm-dcs- pcs-umts-cdma-gprs-edge-hspa 800mhz to 2200mhz monopole helical antenna is a quality robust antenna with high gain in a small form factor. connection is made via straight sma(m) connector. with a hardened waterproof pu casing, this antenna is a low cost small form factor external antenna solution for telematics devices this antenna also comes in a white version. tg.22.0111w 1. introduction 2. key antenna performance indicators parameter specifcation frequency range 800mhz to 2200mhz bands gsm-dcs-pcs-umts-cdma-gprs-edge-hspa vswr 2.3 polarization linear power handling 20 w impedance 50 ohms connector straight sma(m) parameter specifcation temperature -40 to +85 radome color black radome material pu weight 6 g 2.1 electrical specifcations 2.2 environmental & mechanical characteristics spe-11-8-109/e/ss |
page 3 of 14 3. test set up figure 1. ee euree e spe-11-8-109/e/ss |
0 -5 -10 -15 -20 -25 -30 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400 (mhz) page 4 of 14 4. antenna parameters 4.1 return loss figure 2. eur .22.111 spe-11-8-109/e/ss |
page 5 of 14 5 4 3 2 1 0 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400 (mhz) 4.2 vswr figure 3. .22.111 spe-11-8-109/e/ss |
25% 20% 15% 10% 5% 0% 600 800 1000 1200 1400 1600 1800 2000 2200 2400 (mhz) page 6 of 14 4.3 effciency (db) frequency 824 836 849 869 880 894 900 915 925 940 960 effciency 13.18% 14.31% 15.37% 16.30% 16.21% 15.43% 16.01% 16.83% 18.20% 19.92% 17.11% frequency effciency frequency 1710 1750 1785 1805 1840 1850 1880 1910 1920 1930 1950 effciency 18.33% 17.96% 18.03% 17.45% 17.55% 18.01% 17.90% 17.13% 18.18% 17.50% 18.53% frequency 1960 1980 1990 2110 2140 2170 effciency 18.48% 18.81% 18.35% 18.62% 18.72% 17.92% spe-11-8-109/e/ss |
page 7 of 14 4.4 radiation pattern data z y x spe-11-8-109/e/ss |
page 8 of 14 4.4.1 radiation pattern, aligned at the connector spe- 11 -8- 10 9/c /ss page 6 of 6# 3.3.1 radiation pattern, aligned at the connector -30 -25 -20 -15 -10 -5 0 850mhz 900mhz 1800mhz 1900mhz 2170mhz 1575mhz gps spe-11-8-109/e/ss |
page 9 of 14 4.4.2 radiation pattern, azimuth plane (xy) spe- 11 -8- 10 9/c /ss page 7 of 7# 3.3.2 radiation pattern, azimuth plane (xy) -30 -25 -20 -15 -10 -5 0 850mhz 900mhz 1800mhz 1900mhz 2170mhz 1575mhz gps spe-11-8-109/e/ss |
page 10 of 14 4.4.3 radiation pattern C aligned at the connector 1575mhz only spe- 11 -8- 10 9/c /ss page 8 of 8# 3.3.4 radiation pattern C aligned at the connector 1575mhz only spe-11-8-109/e/ss |
page 11 of 14 4.4.4 radiation pattern, azimuth plane (xy) C 1575mhz only spe- 11 -8- 10 9/c /ss page 9 of 9# 3.3.5 radiation pattern, azimuth plane (xy) C 1575mhz only -30 -25 -20 -15 -10 -5 0 spe-11-8-109/e/ss |
page 12 of 14 5. drawing and dimensions (unit: mm) this drawing and its inherent design concepts are property of taoglas. not to be copied or given to third parties without the written consent of taoglas. tw design centre all initial design kiwi 2011/10/26 a sma(m) st antenna housing tpee brass black gold sma(m) st name material finish qty 1 1 000111f0300xxa 200211j000002a p/n name p/n material finish quantity 1 antenna housing 000111f0300xxa tpee black 1 2 sma(m) st 200211j000002a brass gold 1 spe-11-8-109/e/ss |
page 13 of 14 6. packaging 1pcs antennas per small pe bag. 100 small pe bags per big pe bag. 100pcs antennas per big sealed pe bag. unless other specified tolerances on x x.x x.xx angles holedia scale xxxx unit mm drawn by : jason chec ked by: jimmy designed by: jimmy approved by : jimmy document page rev. title : tg. 22 antenna assembly no. iso no: psp -12-8- page 6 of 6 5 b ? 5.1 ? pe 1 ? 1 pcs antennas per small pe bag . 5.2 ? pe 100 pe , ?D? 100 small pe bags per big pe bag . 5.3 ? pe ? 10 0pcs ? 10 0pcs antennas per big pe bag . 5.4 ?r???? , b?sy antenna should be placed flat and neat in the pe bag. h ot seal the pe bag without pressing or damage the antenna . 5.5 c??? confirm the quantity in each pe bag . tg.22 pe pe spe-11-8-109/e/ss |
page 14 of 14 taoglas makes no warranties based on the accuracy or completeness of the contents of this document and reserves the right to make changes to specifcations and product descriptions at any time without notice. taoglas reserves all rights to this document and the information contained herein. reproduction, use or disclosure to third parties without express permission is strictly prohibited. copyright ? taoglas ltd. 7. installation sop for tighten sma connector sop for tighten sma connector sop for tighten sma connector sop for tighten sma connector 1. use hand to screw the sma connector. tighten it until you feel a little tight. 2.use torque wrench which have 0.9 nm torque limit to tighten it. do not use normal wrench. sop for tighten sma connector sop for tighten sma connector sop for tighten sma connector sop for tighten sma connector 1. use hand to screw the sma connector. tighten it until you feel a little tight. 2.use torque wrench which have 0.9 nm torque limit to tighten it. do not use normal wrench. sop for tighten sma connector sop for tighten sma connector sop for tighten sma connector sop for tighten sma connector 1. use hand to screw the sma connector. tighten it until you feel a little tight. 2.use torque wrench which have 0.9 nm torque limit to tighten it. do not use normal wrench. sop for tighten sma connector sop for tighten sma connector sop for tighten sma connector sop for tighten sma connector 1. use hand to screw the sma connector. tighten it until you feel a little tight. 2.use torque wrench which have 0.9 nm torque limit to tighten it. do not use normal wrench. 1) use hand to screw the sma connector. tight en it until it feels a little tight. 2) use torque wrench which has 0.9 nm t orque limit to tighten it. 3) do not use normal wrench. spe-11-8-109/e/ss |


▲Up To Search▲   

 
Price & Availability of TG220111

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X