ESP-125-T quartz restrike system features wiring dimensions 12 leads, stripped 0.63 ? for use with hps or metal halide (probe-start or pulse start) magnetic ballasts with a 120v tap or input ? 50/60 hz operation ? compact and simple to wire ? measures the current drawn by the hid circuit rather than voltage across the circuit allowing use with virtually any type of lamp or ballast circuit ? operates on hid circuits from 39-1500 watts ? operates auxiliary lamps up to 500w ? non-arcing switches allow the ESP-125-T to be used in class 1, division ii vapor tight fxtures ? can be wired directly to emergency generator power ? high temperature, fameproof plastic enclosure, 105oc maximum surface temp rating ? timed version (-t) keeps quartz lamp illuminated for 2-3 minutes until hid lamp reaches 25-50% brightness ? patent pending ? not for use with f-can ballasts with ignitors 1.5? 3.83? .75? threaded nipple: ??-nps esp-125 (t) ignitor-based hid 277v 240v 208v 120v ignitor com black white red yellow lamp shell lead cap x1 x2 x3 hid lamp 500w max quartz load esp-125 (t) no-ignitor hid 277v 240v 208v 120v com black white red yellow lamp shell lead cap hid lamp 500w max quartz load the esp-125 is a traditional 120v control that incorporates a current sense circuit that automatically lights a quartz lamp when the main hid lamp is extinguished. it has a built-in timer to keep the quartz lamp on for 2-3 minutes during the hid lamp warm-up period. rev 7-15-14 ?made in usa? of imported and domestic components specifcations subject to change without notice. thomas research products ? 1215 bowes rd ? elgin, il 60123 ? t 847-515-3057 ? f 847-515-3047 ? www.trpssl.com
|