specification control drawing 300 constitution drive menlo park, ca 94025, usa thermofit devices title: soldersleeve shield termination environment resistant with lead unless otherwise specified dimensions are in millim eters. inches dimensions are between brackets. document no.: s02-07/-08/-10-r-xx tolerances: 0.00 n/a 0.0 n/a 0 n/a angles: n/a roughness in micron te connectivity reserves the right to amend this drawing at any time. users should evaluate the suitability of the product for their application. dcr number: d000419 replaces: n/a drawn by: m. foronda date: 27-sept-00 prod. rev. see table doc issue: 2 scale: none size: a sheet: 1 of 1 print date: 12-may-11 if this document is printed it becomes uncontrolled . check for the latest revision product revision component dimensions cable dimensi ons product name ident. code l 1.75 (l 0.07) ?b min ?c min h min ?d max ?e max ?f min ?g max s02-07-r-xx * size2r 16.5 (0.650) 2.65 (0.105) 3.68 (0.140) 8.25 (0.325) 2.65 (0.105) 3.68 (0.140) 1.40 (0.055) 0.72 (0.030) s02-08-r-xx * size3r 16.5 (0.650) 4.30 (0.170) 5.08 (0.200) 8.25 (0.325) 4.30 (0.170) 5.08 (0.200) 2.15 (0.085) 1.25 (0.050) s02-10-r-xx * size5r 19.1 (0.750) 7.00 (0.275) 7.60 (0.300) 8.25 (0.325) 7.00 (0.275) 7.60 (0.300) 4.30 (0.170) 2.50 (0.100) * consult raychem for individual product revision . contains more than 1 part name. materials 1. insulation sleeve: heat-shrinkable, transparent blue, radiation cross-linked modified polyvinyliden e fluoride. 2. solder preform with flux: solder: type sn63 per ansi j-std-006. flux: type rol1 per ansi-j-std-004. thermal indicator: color change violet to color less. 3. meltable rings: thermally stabilized thermoplast ic. color: blue. 4. pre-installed lead: mil-w-22759/32-22-xx*. (rayc hem 55a0111-22-xx*) *xx: part name and lead callout shall be replaced w ith lead color designation per mil-std-681. colors available: solid and with single stripe. application 1. these parts are designed to provide an environme nt protected shield termination on cables, rated fo r 105 c minimum, meeting the dimensional criteria listed and having tin or silver plated shields and insulation compatible with the insert material. for compatible insulations, see sae-as83519/2 o r consult raychem. 2. when installed per raychem process standard rcps -100-70, assemblies will meet those requirements of raychem specification rt-1404 and sae-as83519/2. 3. for assembly information, refer to raychem docum ent rcps-100-70. 4. parts shall be marked with identification code p er table. for best results,prepare the cable as show n: - strip length of shield: 6.35 C 8.25 (.250 - .325 ) - use methods (a) or (b) with cable rated for 125 c and above. use method (c) for cables rated for 10 5 c and cable with spiral wrapped shields. a) window strip b) end strip c) end str ip with fold back
|