the copyright and authority for the interpretation of the products are reserved by mornsun tax06w-xx 2013.05.08-a/1 page 1 of 3 12.5mm slim case passive signal isolators tax06w-11 series part number system tax06w-xx outputsignal inputsignal case serialnumber channelconfiguratior analogsignal transducertype slim features two-port electrical isolation (input and output) high accuracy (0.1% f.s.) high linearity (0.1% f.s.) low temperature drift(35ppm/ c) high reliability(mtbf>500,000 hours) general description tax06w-xx passive signal isolators, ideal for applied in t he industrial automation system ,receive the 4~20ma signal from the industrial field equipment, and provide an isolated output to dcs/plc. galvanic isolation eliminates ground loops, reduces noise, and blocks transient signals, which improve system stability. the products can also be used in the application of output loop circuit power supply. through this way, it can power the two wire system instruments, and receive 4~20ma signal from the instruments which can be isolated output to plc or dcs without any independent power supply. the product contain 1-input-1-output,2-input-2-output, 3-input-3 -output and so on. the thickness of 12.5mm meeting the need for high density field installation. selection guide model input output channels TA306W-11 4~20ma 4~20ma 3 ta206w-11 4~20ma 4~20ma 2 ta106w-11 4~20ma 4~20ma 1 electrical characteristics input signal 4~20ma input impedance 5v(@20ma input) input input over-current 30ma (over-current protection) output signal 4~20ma output load 300 transmission characteristics zero offset 0.1%f.s. precision 0.1%f.s.(output loop circuit power supply accuracy:0.3%f.s.) response time <0.5s temperature drift coefficient 0.0035%f.s./ (operating temperature:-25 ~ +71 ) isolation characteristics electrical isolation two-port isolation (input and output) isolation strength dc3000v@1min; ac2000v@1min, leakage current 5ma insulation resistance 100m , 500vdc other characteristics operating temperature :-25~+71 ambient temperature transport and storage temperature: -40~+85 package 35mm din-rail package
the copyright and authority for the interpretation of the products are reserved by mornsun tax06w-xx 2013.05.08-a/1 page 2 of 3 weight 90g,typ service environment no dust, strong vibration, shock and corrosion of the gas product in surroundings note:1. all specifications measured at ta=25 c, humidity<75%, nominal input voltage and rated output load unless otherwise specified. 2. all characteristics are meant for listed model, non-standard models may perform differently, you can contact mornsun fae for more details. operation notes 1. please read the user manual carefully before using. if any question, please contact our technical support department. 2. please don t use this product in hazardous area. 3. to avoid void of explosion proof, or any failure, users disassemble this product is forbidden. after-sales service 1. products are carefully inspected and quality controlled during production and before shipment. if they operated abnormally or there was anything wrong, please contact our agent from which you purchased or mornsun fae as soon as possible. 2. mornsun warranty our product for 3 years from manufacturing date. during this period, mornsun will repair or replace the product if product was found to have manufacturing defect. application circuit you can see a application guide to isolation transmitter application circuit diagram & pin description wiring diagram of output loop circuit power supply application + - dcs/plc + - + - 4~20ma + - + - + - 24v 24v 24v rl two wire equipment rl rl channel 1 4~20ma 4~20ma 8 7 10 9 12 11 6 5 4 3 2 1 two wire equipment two wire equipment channel 2 channel 3 channel 1 channel 2 channel 3 output loop circuit of power supply pin description pin description 3 in 3 out 1 iout3 channel 3 current output 2 vin3+ channel 3 power input+ 3 iout 2 channel 2 current output 4 vin 2+ channel 2 power input+ 5 iout 1 channel 1 current output 6 vin 1+ channel 1 power input+ 7 iin1 channel 1 current input 8 vout1+ channel 1 voltage output+ 9 iin 2 channel 2 current input 10 vout2+ channel 2 voltage output+ 11 iin 3 channel 3 current input 12 vout3+ channel 3 voltage output+ wiring diagram of current source application + - + - + - dcs/plc rl rl rl transmitter channel 1 4~20ma 4~20ma 4~20ma 4~20ma 4~20ma 4~20ma + - + - + - 8 7 10 9 12 11 6 5 4 3 2 1 channel 1 channel 2 channel 2 channel 3 channel 3 transmitter transmitter current source input pin description pin description 3 in 3 out 1 si3- signal 3 input- 2 si3+ signal 3 input+ 3 si2- signal 2 input- 4 si2+ signal 2 input+ 5 si1- signal 1 input- 6 si1+ signal 1 input+ 7 so1- signal 1 output- 8 so1+ signal 1 output+ 9 so2- signal 2 output- 10 so2+ signal 2 output+ 11 so3- signal 3 output- 12 so3+ signal 3 output+
the copyright and authority for the interpretation of the products are reserved by mornsun tax06w-xx 2013.05.08-a/1 page 3 of 3 installation & disassembly din35mm standard rail installation: 1. insert the top of the instrument card in the rail; 2. push the bottom of the instrument into the rail. 1 2 1. insert a screwdriver between the bottom of the card lock and the rail; 2. pull up the screwdriver and press the card lock downwards; 3. pull the instrument out of the rail. 1 2 3 packaging dimension & packaging diagram note: 1. all specifications are measured at ta=25 c, humidity<75%, nominal input voltage and rated output load unless otherwise specified. 2. in this datasheet, all the test setup and methods are based on our corporate standards. 3. all characteristics are for listed models, and non-standard models may perform differently. please contact our technical support for more detail. 4. contact us for your specific requirement. 5. specifications are subject to change without prior notice. mornsun science & technology co.,ltd. address: no. 5, kehui st. 1, kehui development center, science ave., guangzhou science city, luogang district, guangzhou,p.r.china. tel: 86-20-38601850 fax:86-20-38601272 e-mail: info@mornsun.cn http://www.mornsun-power.com
|
