series c84/93 lo-pro ? file dual beam solder tail edge-grip sockets note: aries specializes in custom design and production. in addition to the standard products shown on this page, special materials, platings, sizes, and configurations can be furnished, depending on quantities. aries reserves the right to change product specifications without notice. features: ? anti-wicking design on lo-pro?file sockets eliminates flux or sol- der contamination. ? dual beam, edge-grip contacts provide high retention and positive contact. ? end-to-end and side-to-side stackable. specifications: ? body is black ul-94v-0 glass-filled nylon 4/6. ? dual beam contact is phosphor bronze alloy 521. ? contact plating: (all over 50 ? [1.27 m] nickel per sae-ams-qq- n-290) tin = 200 ? [5.08 m] min matte tin per astm b545-97. tin/lead = 100-150 ? [2.54-3.81 m] min. 90/10 tin/lead per mil-p-81728. gold = 10 ? [0.25 m] min. gold per mil-g-45204 in contact area and 100-150 ? [2.54-3.81 m] min 90/10 tin/lead per mil-p- 81728 on solder tail ? wafer is nomex, .005 [.13] thick. ? contact current rating=1 amp. ? contact resistance=20 mohms initial. ? insulation resistance=100 mohms @ 500 vdc per mil-std-1344, method 3003.1. ? dielectric withstanding voltage=1000 vac. ? operating temperature= -67f to 221f [-55c to 105c] tin = -67f to 257f [-55c to 125c] gold ? accepts leads up to .011 x .018 .003 [.28 x .46 .08] or .021 [.53] diameter. ? accepts leads .070-.135 [1.78-3.43] long. mounting considerations: ? suggested pcb hole size=.036 .002 [.91 .05] dia. ordering informa tion all tolerances .005 [.13] unless otherwise specified a ll dimensions : inches [ millimeters ] no. of pins dim ?a? dim. ?b? centers ?c? dim. ?d? dim. ?e? dim. ?f? 6 .290 [7.37] .200 [5.08] .300 [7.62] .395 [10.03] --- --- 8 .390 [9.91] .300 [7.62] .300 [7.62] .395 [10.03] --- --- 14 .690 [17.53] .600 [15.24] .300 [7.62] .395 [10.03] --- .350 [8.89] 16 .790 [20.07] .700 [17.78] .300 [7.62] .395 [10.03] --- .400 [10.16] 18 .890 [22.61] .800 [20.32] .300 [7.62] .395 [10.03] --- .450 [11.43] 20 .990 [25.15] .900 [22.86] .300 [7.62] .395 [10.03] --- .500 [12.70] 24 1.190 [30.23] 1.100 [27.94] .300 [7.62] .395 [10.03] .400 [10.16] --- 24 1.190 [30.23] 1.100 [27.94] .600 [15.24] .695 [17.65] .400 [10.16] --- 28 1.390 [35.31] 1.300 [33.02] .600 [15.24] .695 [17.65] .500 [12.70] --- 40 1.990 [50.55] 1.900 [48.26] .600 [15.24] .695 [17.65] .500 [12.70] 1.000 [25.40] cont act det ail 6 pin socket is closed frame as shown 12001 rev.d printouts of this document may be out of date and should be considered uncontrolled north america frenchtown, nj usa tel: (908) 996-6841 fax:(908) 996-3891 europe tel: +44 870 240 0249 fax: +44 871 919 6033 europe@arieselec.com http://www.arieselec.com ? info@arieselec.com abc wafer on underside of socket c xx xx- xx tl series pin plating: 93= gold 84= tin no. of pins (see table) -02= nomex wafer (standard) -03= 24 pin on .300 center (comes with wafer) plating option: tin/lead
|
