372 dimensions performance environment al electrical mechanical www.honeywell.com/sensotec n 0.25% non-linearity n stainless steel n 0.5 to 8.0 in. ranges ? 0.19 in. ? 0.81 in. range codes available stroke ranges approx. body weight (oz.) l (in.) x (in.) approx. armature weight (oz.) typical f.s. output at 3v rms x nominal electric zero point m5 x .08 l 0.35 in. model mvl7 ac-ac long stroke lvdt order code by125 hp +/- 0.5 in. 5.0 1.7 6 1.25 2.4v rms hq +/- 1.0 in. 6.0 2.7 8 1.75 3.0v rms hr +/- 2.0 in. 10.6 3.2 13 2.0 4.8v rms hs +/- 3.0 in. 15.0 4.7 16 2.2 4.5v rms ht +/- 4.0 in. 16.75 5.2 20 2.5 9.5v rms hu +/- 6.0 in. 24.25 7.2 29 4.0 7.2v rms hv +/- 8.0 in. 31.75 10.2 42 5.1 4.8v rms wiring codes w ire supply red (+) supply (calibrated @ 3v rms 5 khz) yellow supply return blue output green output return black secondary center tap (normally not connected) s troke range ................ +/- 0.5 to 8.0 in. non-linearity (max.)................+/- 0.25% full scale non-repeatability (max.)................not applicable output sensitivity ................ see t able above resolution................infinite t emperature, operating ................ -58 to 257f temperature, effect zero (max.) ................0.006% full scale/f s p an (max.)................0.006% full scale/f element type................ac-ac lvdt input supply (calibrated) ................3 v rms @ 5 khz input supply (acceptable)................1-7 v rms @ 2-10 khz electrical termination................multiconductor shielded cable material................stainless steel probe material................stainless steel armature type................free unguided probe thread................m5 x 0.8 weight................see table above s pring force (max.)................not applicable 1-888-282-9891
373 www.honeywell.com/sensotec 1-888-282-9891 typical system diagram range range code +/- 0.5 in. hp +/- 1.0 in. hq +/- 2.0 in. hr +/- 3.0 in. hs +/- 4.0 in. ht +/- 6.0 in. hu +/- 8.0 in. hv range codes special customer requirements (consult factory) options how to order the order code consist s of the product model, the desired range code and the available options. model code range code options code sample code: by125 hq l10 moisture resistant radiation resistance 100m rads longer cable length, limited on certain models threaded body t .e.d.s. ieee 1451.4 module signature calibration model mvl7 ac input display unit s d m sc500 sc1000 s c2000 sc3004 in-line amplifiers dld-vh dld-ch (required for ac lvdt?s and if ac input display units a re not being used) customer supplied c hart recorder alarm panel d ata acquisition computer plc mounting blocks aa937 mounting block supplied as standard model mvl7 fast t rack delivery built to order stroke ranges +/- 0.5 to 8.0 in. electrical t ermination multiconductor shielded cable (6 f t.) tm405. axial bendix connector on body radial (side) tm406. bendix connector on body electrical cable orientation tm49. axial cable exit mounting threads tm51 1. 13/16 - 32 unf improved linearity l10. +/- 0.1% max. linearity (less than or equal to +/- 4 in.) higher temperature tm315. 400 f up to +/- 4.0 in. mounting options rod end bearing -not rohs compliant
|