the information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. this documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. it is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. neither schneider electric industries sas nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein. nov 5, 2012 1 product data sheet characteristics XPEM110 single foot switch - ip66 - without cover - metallic - blue - 1 nc + 1 no main range of product harmony xpe product or component type foot switch material metal foot switch type single foot switch device short name xpem protective cover without trigger mechanism without trigger mechanism contacts operation 1 step contacts type and com- position 1 nc + 1 no colour blue complementary positive opening with conforming to en/iec 60947-5-1 appendix k connections - terminals screw clamp terminal: <= 2 x 1.5 mm2 with or without cable end screw clamp terminal: <= 1 x 2.5 mm2 with or without cable end cable entry 2 entries tapped for pg 16 cable gland mechanical durability 15000000 cycles [ie] rated operational current 0.27 a, 250 v, dc-13, q300 conforming to en/iec 60947-5-1 appendix a 3 a, 240 v, ac-15, a300 [ui] rated insulation voltage 500 v, degree of pollution: 3 conforming to vde 0110 group c 500 v, degree of pollution: 3 conforming to nf c 20-040 group c 500 v, degree of pollution: 3 conforming to en/iec 60947-1 300 v conforming to ul 508 300 v conforming to csa c22-2 no 14 [uimp] rated impulse withstand voltage 6 kv conforming to en/iec 60947-1 resistance across terminals <= 25 mohm conforming to nf c 93-050 method a <= 25 mohm conforming to iec 60255-7 category 3 short circuit protection 10 a by cartridge fuse type gg conforming to vde 0660-200 10 a by cartridge fuse type gg conforming to en/iec 60947-5-1 operational power in w 7 w dc-13, operating rate: 60 cyc/mn, 5000000 cycles, 48 v, load factor: 0.5 conforming to en/iec 60947-5-1 appendix c 4 w dc-13, operating rate: 60 cyc/mn, 5000000 cycles, 120 v, load factor: 0.5 conforming to en/iec 60947-5-1 appendix c 10 w dc-13, operating rate: 60 cyc/mn, 5000000 cycles, 24 v, load factor: 0.5 conforming to en/iec 60947-5-1 appendix c product weight 1.2 kg environment standards en/iec 60947-5-1 vde 0660-200 product certifications csa fimko protective treatment tc ambient air temperature for operation -25...70 c ambient air temperature for storage -40...70 c vibration resistance 15 gn (f = 10...500 hz) conforming to iec 60068-2-6 shock resistance 20 gn conforming to iec 60068-2-27 150 gn conforming to nf e 09-031 class of protection against electric shock class i conforming to nf c 20-030 class i conforming to en/iec 61140 ip degree of protection ip66 conforming to iec 60529
2 product data sheet performance curves XPEM110 electrical durability of contacts ac-15 utilization category operating rate: 3600 operating cycles/hour. load factor: 0.5. inductive circuit: x current in a y millions of operating cycles dc-13 utilization category refer to the product characteristic operational power in w.
|
