apr. 5, 2010 saw filter for gsm1800(rx) murata part number : SAFEA1G84FA0F00 marking : laser printing package dimensions specification 1/5 (1) (3)(4) others unit : unbalance port : balance port : ground : mm s z 1.35 0.05 5-0.25 0.05 0.5max. 2-0.25 0.05 5-0.325 0.050 (0.075) 2-0.25 0.05 (0.05) (1) (2) (3) (5) (4) (0.17) dot marking( ? 0.3 ) 1.05 0.05 2-0.25 0.05 nominal center frequency(fc) 1) 100 to 1300 mhz 35 db min. 35 db min. 39 db 2) 1300 to 1705 mhz 25 db min. 25 db min. 33 db 3) 1705 to 1785 mhz 10 db min. 13 db min. 17 db 4) 1920 to 1980 mhz 12 db min. 15 db min. 17 db 5) 1980 to 3000 mhz 15 db min. 15 db min. 18 db 6) 3000 to 4000 mhz 40 db min. 40 db min. 46 db 7) 4000 to 5000 mhz 35 db min. 35 db min. 42 db 8) 5000 to 6000 mhz 27 db min. 27 db min. 30 db max. max. input signal lev el 20mw(+13dbm),2000 hours (1805 to 1880mhz) 1.5db max. 1.0db max. (1805 to 1880mhz) (1805 to 1880mhz) phase balance 18012deg. 18010deg. 0.3 db vswr 2.1 max. 1.9 max. 1.6 balance port matching impedance (nominal) 150 w //18nh 50 w 180+3deg. (1805 to 1880mhz) max. unbalance port matching impedance (nominal) max. 0.7db item specification -30 to 85c 252c typ. ripple deviation 1.5db 1.2db amplitude balance 1842.5mhz (1805 to 1880mhz) insertion loss absolute attenuation 2.2db max. 1.7db max. 1.4 db
apr. 5, 2010 saw filter for gsm1800(rx) murata part number : SAFEA1G84FA0F00 frequency performance 2/5 amplitude balance phase balance
apr. 5, 2010 saw filter for gsm1800(rx) murata part number : SAFEA1G84FA0F00 3/5 dimensions of carrier tape dimensions of reel SAFEA1G84FA0F00r14 4000pcs/reel dimensions of tape unit: mm unit: mm 160 ... 1 9 0 80 ...1 2 0 4 0 0 ... 56 0 trailer tape components leader cavity unit : m m 2.0 0.5 9.0 0.5 13 .5max. ( ? 60) ?? 1 7 8 ) ? 13.0 0.5 s z direction of feed cover tape 4.0 0.1 2 . 0 0 0. 05 3 max. +0.1 ? 0.8 -0.0 1.3 0.1 0.30 0. 05 1.6 0.1 3 max. 0.70 0.10 8.0 0.2 3.50 0.0 5 1.75 0.10 4.0 0.1 +0.1 ? 1.5 -0.0 s z s z
apr. 5, 2010 saw filter for gsm1800(rx) murata part number : SAFEA1G84FA0F00 4/5 recommended land pattern test circuit 50 150 18nh 1 5 4 2 3 : land pattern unit : mm 0.25 1.3 0.25 0.325 0.425 0.425 0.325 0.525 0.25 1.6 0.25 0.325 0.525
apr. 5, 2010 saw filter for gsm1800(rx) murata part number : SAFEA1G84FA0F00 ? caution - limitation of applications please contact us before using our products for the applications listed below which require especially for the prevention of defects which might directly cause damage to the third partys life, body or property. a. aircraft equipment b. aerospace equipment c. undersea equipment d. nuclear control equipment e. medical equipment f. transportation equipment (vehicles, trains, ships, etc.) g. traffic signal equipment h. disaster prevention / crime prevention equipment i. data - processing equipment j. application of similar complexity and / or reliability requirements to the applications listed in the above ? this pdf datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf datasheet has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. rohs compliance this component is compliant with rohs directive. this component was always rohs compliant from the first date of manufacture. 5/5
|
