rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-9148 e-mail: info@rfm.com page 1 of 3 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?2001 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF1093A-121504 electrical characteristics characteristic sym notes min typ max units nominal center frequency f c 1 175.000 mhz passband insertion loss at fc il 8 9.0 db 2 db passband bw 2 1, 2 330 460 khz amplitude ripple (peak to adjacent valley) 0.5 db p-p amplitude variation over fc 200 khz 1.0 group delay variation over fc 300 khz gdv <200 260 ns p-p absolute group delay gd 1.3 1.5 s rejection fc-0.9 to fc-0.6 and fc+0.6 to fc+0.9 mhz 1, 2, 3 5 db fc-1.2 to fc-0.9 and fc+0.9 to fc+1.2 mhz 17 fc-6.0 to fc-1.2 and fc+1.2 to fc+6.0 mhz 30 fc-155 to fc-6.0 and fc+6.0 to fc+125 mhz 50 operating temperature range t a 1 -5 +70 c sm13365-12 ? designed for gsm bts transmitter if applications ? low insertion loss ? excellent size-to-performance ratio ? hermetic 13.3 x 6.5 mm surface-mount case ? unbalanced input and output ? complies with directive 2002/95/ec (rohs) absolute maximum ratings rating value units maximum incident power in passband +10 dbm max. dc voltage between any 2 terminals 30 vdc storage temperature range -40 to +85 c suitable for lead-free soldering - max. soldering profile 260c for 30 s 175 mhz saw filter SF1093A notes: 1. unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 w and measured with 50 w network analyzer. 2. unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. 3. rejection is measured as attenuation below the minimum il point in the passband. rejection in final user application is dependent on pcb layout and external impedance matching design. see application note no. 42 for details. 4. "lrip" or "l" after the part number indicates "low rate initial production" and "eng" or "e" indicates "engineering prototypes." 5. the design, manufacturing process, and specifications of this filter are subject to change. 6. either port 1 or port 2 may be used for either input or output in the design. however, impedances and impedance matching may vary between port 1 and port 2, so that the fil- ter must always be installed in one direction per the circuit design. 7. us and international patents may apply. 8. electrostatic sensitive device. observe precautions for handling. connection terminals port 1 hot 2 port 1 gnd return 3 port 2 hot 8 port 2 gnd return 9 case ground all others electrical connections impedance matching to 50 w unbalanced external l-c case style sm13365-12 13.3 x 6.5 mm nominal footprint lid symbolization (yy = year, ww = week) rfm SF1093A yyww pb
175 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-9148 e-mail: info@rfm.com page 2 of 3 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?2001 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF1093A-121504
175 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-9148 e-mail: info@rfm.com page 3 of 3 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?2001 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. SF1093A-121504 sm13365-12 case case dimensions dimension mm inches min nom max min nom max a 13.08 13.31 13.60 0.515 0.524 0.535 b 6.27 6.50 6.80 0.247 0.256 0.268 c 1.91 2.00 0.075 0.079 d 1.50 0.059 e 0.79 0.031 h 1.0 0.039 p 2.54 0.100 12-terminal ceramic surface-mount case 13.3 x 6.5 mm nominal footprint materials solder pad termination au plating 30 - 60 uinches (76.2-152 um) over 80- 200 uinches (203-508 um) ni. lid fe-ni-co alloy electroless nickel plate (8-11% phosphorus) 100-200 uinches thick body al 2 o 3 ceramic pb free electrical connections connection terminals port 1 input or return 2 return or input 3 port 2 output or return 8 return or output 9 ground all others single ended operation return is ground differential operation return is hot c h p (8 places) e (10 places) d b a 4 5 6 7 1 12 11 10 3 9 8 2 top view bottom view 2 3 8 9 1 12 11 10 4 5 6 7
2u874 scale sheet of a fscm no. size dwg no. rev none w/o or ecn SF1093A-demo a 1 2 6797 p ar t identifier description 1 description 2 qty/assy reference description SF1093A-demo demo board,SF1093A SF1093A-000 assy diagram,demo board SF1093A 0 400-1412-001 pcb, demo, 13mm, type 2 1.0000 pcb 500-0003-270 cap,chip,npo,27(j),std 1.0000 c 1 500-0003-330 cap,chip,npo,33(j),std 1.0000 c 2 500-0248-001 conn,coax,flange mt.jack 4 hole 2.0000 j 1,2 500-0010-150 ind,chip,1008cs,15nh,10% 2.0000 l 1,4 500-0010-047 ind,chip,1008cs,4.7nh,10% 2.0000 l 2,3 bill of materials
|
