View PD080SL1_7819711.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PD080SL1 t he information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in w hole or in part w i thout prior w r itten permission of pr ime view international co., ltd. page:1 version :3.0 technical specification model no : PD080SL1 the content of this inform ation is subject to be changed without notice. please contact pvi or its agent for further inform ation. custom er?s confirm a tion c u s t o m e r d a t e b y pvi?s confirm a tion confirm e d by prepared by p-511-393(v:3) f o r m o r e i n f o r m a t i o n : a z d i s p l a y s , i n c . 7 5 c o l u m b i a , a l i s o v i e j o , c a , 9 2 6 5 6 h t t p : / / w w w . a z d i s p l a y s . c o m
PD080SL1 the information contained herein is the excl usive property of prime view internati onal co., ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of pr ime view international co., ltd. page:2 revision history rev. eng. issued date revised content v0.1 ??z july 25,2006 preliminary v0.2 ??z oct 16,2006 modify page6 5-1) tft-lcd panel driving v0.3 ??z dec 15,2006 modify page4 4. mechanical drawing of tft-lcd module add page26 16.packing 1.0 ??z jan 11, 2006 new 2.0 ??z may 28, 2007 modify page25 14. reliability test: ltot/ltst from-20
to-25
3.0 ??z july 23, 2007 modify page6 modify connect pin p-511-393(v:3)
PD080SL1 the information contained herein is the excl usive property of prime view internati onal co., ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of pr ime view international co., ltd. page:3 technical specification contents no. item page - cover 1 - revision history 2 - contents 3 1 application 4 2 features 4 3 mechanical specifications 4 4 mechanical drawing of tft-lcd module 5 5 connections and functions for interface pins 7 6 absolute maximum ratings 10 7 electrical characteristics 10 8 pixel arrangement 12 9 display colors and input data signals 12 10 input signal timing 16 11 power on sequence 20 12 optical characteristics 20 13 handling cautions 24 14 reliability test 25 15 packing 26 p-511-393(v:3)
PD080SL1 the information contained herein is the excl usive property of prime view internati onal co., ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of pr ime view international co., ltd. page:4 1.application this data sheet applies to a color tft lcd m odule, PD080SL1.the module applies to notebook pc, sub-note-book pc and other oa product, which re quire high quality flat panel display. prime view assume no responsibility for any damage resulting from the use of the device which dose not comply with the instructions and th e precautions in these specification sheet. 2. features . amorphous silicon tft lcd panel with back-light unit . pixel in stripe configuration . slim and compact, designed for o/a application . display colors j 262,144 colors or 16,777,216 colors . backlight driving dc/ac inverter not included in this module . long life lamp 3.mechanical specifications parameter specifications unit screen size 8 (diagonal) inch display format 800 (rgb) 600 dot display colors 262,144 active area 162(h) 121.5 (v) mm pixel pitch 0.2025 (h) 0.2025 (v) mm pixel configuration stripe outline dimension 200(w) 152(h) 10.5(d) (typ.) mm weight 343 + 15 g back-light ccfl, 2 tubes surface treatment anti-glare display mode normally white gray scale inversion direction 6 (ref to page 20 viewing angle ) o?clock p-511-393(v:3)
PD080SL1 t he information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in w hole or in part w i thout prior w r itten permission of pr ime view international co., ltd. page:5 4. mechanical drawing of tft-lcd module p-511-393(v:3)
PD080SL1 t he information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in w hole or in part w i thout prior w r itten permission of pr ime view international co., ltd. page:6 & u ibo$ifo 1% 4- 's b o l 4i jo 's bol 4i jo $/ -7
)7
)7

p-511-393(v:3)
PD080SL1 t he information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in w hole or in part w i thout prior w r itten permission of pr ime view international co., ltd. page:7 p-511-393(v:3)
PD080SL1 t he information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in w hole or in part w i thout prior w r itten permission of pr ime view international co., ltd. page:8 p-511-393(v:3)
PD080SL1 t he information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in w hole or in part w i thout prior w r itten permission of pr ime view international co., ltd. page:9 p-511-393(v:3)
PD080SL1 t he information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in w hole or in part w i thout prior w r itten permission of pr ime view international co., ltd.page:10 denb input signal. if custom er wanted to of f the denb m ode , y ou m u st keep the denb alway s high or low . ud %& /# ud (tc: the period of sam pling clock) 6. absolute maxim u m ratings: gnd=0v , t a =25
p a r a m e t e r s s y m b o l m i n . max . u n i t r e m a r k supply v o ltage v dd - 0 . 3 + 4 . 0 v input signals v o ltage v in - 0 . 3 v d d + 0 . 3 v n o t e 6 - 1 backlight driving v o ltage v l - 2 0 0 0 v backlight driving frequency f l 2 5 8 0 k h z note 6-1: l vds signal. 7. electrical characteristics 7 - 1 ) r e c o m m e n d e d o p e r a t i n g c o n d i t i o n s : gnd = 0v d ta = 25
item s y m bol m i n . ty p . max. u n i t rem a r k supply voltage v dd 3 . 0 3 . 3 3 . 6 v current dissipation i dd - 1 5 3 - m a n o t e 7 - 1 t o tal power consum ption p dd 0 . 4 6 0 . 5 1 0 . 5 6 w lvds differential input high threshold vth - - 100 m v lvds differential input low threshold vtl -100 - - - note 7-2 h i g h v i h 0.7vcc - v c c v input voltage for dps & fpc signal l o w v i l 0 - 0.2vcc v note 7-1 : to test the current dissipation of v dd , using the ?color bars? testing pattern shown as below. 1 2345678 1. wh i t e 2. yel l ow 3. cyan 4. g r een 5. m agent a 6. red 7. bl ue 8. bl ack i dd current dissipation testing pattern note7-2 : please refers to thc63lvdm83a specification by thin corporation. this lcd m odule conform s to lvds standard. p-511-393(v:3)
PD080SL1 t he information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in w hole or in part w i thout prior w r itten permission of pr ime view international co., ltd.page:11 7-2) recom m e nded driving condition for back light item s y m bol m i n . ty p . max. u n i t rem a r k lam p current i fl 3 5 8 ma 5m a : 420 cd/ note 7-3 e note 7-5 lam p driving frequency f l 25 4 0 8 0 khz lam p v o ltage v l - 5 1 0 - vr m s i fl =5m a d note 7-3 starting voltage (25
) (reference value) vs - - 9 6 0 v r m s starting voltage (0
) (reference value) vs - - 1 0 3 0 v r m s starting voltage (-25
) (reference value) vs - - 1 1 2 0 v r m s note 7-4 t o tal power consum ption (at i fl =5m a ) - - 5 . 1 8 w n o t e 7 - 6 note 7-3 : the back-light driving waveform s hould be as closed to sine-wave as possible. in order to satisfy the quality of b/l , no m a tter use what kind of inverter , the each output lam p current m u st between min. and max. to avoid the abnorm a l display im age caused by b/l. note 7-4 : the ?starting voltage ? m eans the m i nim u m volta ge of inverter to turn on the ccfl. and it should be applied to the lam p for m o re than 1 second to star t up. otherwise the lam p m a y not be turned on. note 7-5: lam p current is m easured with current m e ter for high frequency as shown below i nverter tf t-l c d module ~ a 1 2 4 * pin 4 is v lo w ** current meter : yokog awa 2016-01 lam p current dissipation testing configuration note 7-6 : not including the efficiency of backlight dc/ac inverter 7-3) backlight driving connector ty pe : ?bhr-04vs-1? of japan solder less term inal mfg co. ltd pin no. symbol description remark 1 v l 1 i n p u t v o l t a g e ( h i g h ) 2 v l 2 i n p u t v o l t a g e ( h i g h ) 3 n c 4 v l 4 i n p u t v o l t a g e ( l o w ) p-511-393(v:3)
PD080SL1 t he information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in w hole or in part w i thout prior w r itten permission of pr ime view international co., ltd.page:12 8. pixel arrangem e nt the lcd m odule pixel arrangem e nt is the stripe. r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b r g b 3 rd l i n e 2 n d li n e 1 st l i ne 600 th l i n e 599 th l i n e 598 th l i n e r g b r g b r g b r g b 1 s t p i x e l 800 th p i x e l 1 p i x e l = r g b 9. display colors and input data signals p-511-393(v:3)
PD080SL1 t he information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in w hole or in part w i thout prior w r itten permission of pr ime view international co., ltd.page:13 p-511-393(v:3)
PD080SL1 t he information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in w hole or in part w i thout prior w r itten permission of pr ime view international co., ltd.page:14 p-511-393(v:3)
PD080SL1 t he information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in w hole or in part w i thout prior w r itten permission of pr ime view international co., ltd.page:15 p-511-393(v:3)
PD080SL1 the information contained herein is the excl usive property of prime view internati onal co., ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of pr ime view international co., ltd.page:16 10. input signal timing: denb pin have high priority than sync mode(hsvc+vsync). when ic only use sync pin, denb pin have to connect to ground. (a) timing specifications (denb mode): item symbol min. typ. max. unit remark 604 x t3 628x t3 800 x t3 - frame cycling period t1 14 16.58 20 ms vertical display period t2 600 x t3 600 x t3 600 x t3 - 920 x t5 1056 x t5 1064 x t5 - horizontal scanning time t3 24 26.4 33 ?s horizontal display period t4 800 x t5 800 x t5 800 x t5 - clock cycle t5 20 25.0 31.25 ns clock high level time t6 9.0 - - ns clock low level time t7 9.0 - - ns hold time t8 4.0 - - ns set-up time t9 5.0 - - ns (b) timing specifications (sync mode) item symbol min. typ. max. unit remark 24 26.4 33 us period hp 920 1056 1064 tc display period hdp 800 800 800 tc pulse width hpw 12 128 202 tc back-porch hbp 12 86 202 tc front-porch hfp 42 42 42 tc hpw+hbp 214 214 214 tc hsync-clk hhc 10 - tc-10 ns hsync vsync-hsync hvh 0 0 200 tc 14 16.58 20 ms period (frame cycling period) vp 604 628 800 hp note 1 display period vdp 600 600 600 hp pulse width vpw 2 4 27 hp back-porch vbp 0 23 25 hp front-porch vfp 1 1 1 hp vsync vpw+vbp 27 27 27 hp note 1: frame cycling period is optimum in 16.58ms.(60hz) p-511-393(v:3)
PD080SL1 t he information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in w hole or in part w i thout prior w r itten permission of pr ime view international co., ltd.page:17 (c)tim ing chart: x , 0 x , 1 x , 2 x, 3 x , 597 x , 5 9 8 x , 599 x, y t 1 t 2 t 3 t 3 cl k de nb r5 ~ r 0 g5 ~ g 0 b5 ~ b 0 t 3 t 4 t c clk de nb r5 ~r0 g5 ~ g 0 b5 ~ b 0 0, y 1 , y 2 , y 3 , y 4 , y 5, y 6, y x, y 79 7, y 7 9 9 , y 79 6, y 7 9 8 , y p-511-393(v:3)
PD080SL1 t he information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in w hole or in part w i thout prior w r itten permission of pr ime view international co., ltd.page:18 )4:/$ r, g , b val i d data hp w hp hbp hfp hdp clk hhc hsyn c hs y n c vs y n c hv h p-511-393(v:3)
PD080SL1 t he information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in w hole or in part w i thout prior w r itten permission of pr ime view international co., ltd.page:19 vs y n c r , g , b val i d dat a vp w vp vb p vf p vd p clk t 6 t 7 t 5 7 *) . j o
7 dd 7 *- .by
7 dd hysnc vsy n c de nb r7-r0 g7 - g 0 b7-b0 va lid da ta *o qv u4jho bm $foufs -fwfm 7 dd 7 *) .jo
7 dd 7 *- .by
7 dd cl k a b 7 dd d u ty ( a ,b ) : 50 +10% t 8 t 9 p-511-393(v:3)
PD080SL1 t he information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in w hole or in part w i thout prior w r itten permission of pr ime view international co., ltd.page:20 11.power on sequence 3. 0 v 3. 0 v 0 s < t <35 m s 0 s < t <35 m s u u s i gna l b a c k l i ght 7 %% 1. the supply voltage for input signals should be sam e as v dd. 2. when the power is off , please keep whole signals (hsy nc, vsy n c, denb, clk, data) low level or high im pedance. 12. optical characteristics 12-1) specification: ta = 25
p a r a m e t e r s y m b o l c o n d i t i o n min. typ. m a x . u n i t r e m a r k s horizontal 5 5 6 0 - d e g (to 6 ?clock) 4 5 5 0 - d e g n o t e 1 2 - 1 viewing angle vertical (to 12 o?clock) cr 10 3 0 3 5 - d e g contrast ratio cr optim um direction 2 0 0 4 0 0 - - note 1 2 - 2 r i s e t r - 1 5 3 0 m s response tim e f a l l t f =0 =0 - 2 5 5 0 m s note 12-4 lum i n a n c e l =0 / =0 3 9 0 4 2 0 - cd/ i fl =5m a note 12-3 lum i nance uniform ity u - 75 80 - % note 12-5 x =0 / =0 0 . 2 9 0 . 3 2 0 . 3 5 - white chrom a ticity y =0 / =0 0 . 3 2 0 . 3 5 0 . 3 8 - lam p life tim e - 25
50000 - - h r s i fl =5m a cross talk ratio ctk - - - 3.5 % note 12-6 all the optical m easurem e nt shall be executed 30 m i nutes after backlight being turn-on. the optical characteristics shall be m easured in dark room (am b ient illum i nation on panel surface less than 1 lux). the m easuring configuration shows as following figure. p-511-393(v:3)
PD080SL1 t he information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in w hole or in part w i thout prior w r itten permission of pr ime view international co., ltd.page:21 5 0 0 m m + / - 5 0 m m tft-lcd m odule dc/ac inverter photom eter (topcon bm-5a or bm-7 fast) field = 1 optical characteristics m easuring configuration note 12-1 j the definitions of viewing angles are as follows. 12 o? cl oc k 3 o ? cl oc k 9 o ? cl oc k 6 o? cl ock l amp connector note 12-2 : the definition of contrast ratio $3 -vnj obodf bu hsbzmfwfm -vnj obodfb u hsbzm f wfm = note 12-3 j the ty pical lum i nance value is m easured at lam p current 5 m a . the m a x lum i nance value is m easured at lam p current 8 m a . p-511-393(v:3)
PD080SL1 t he information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in w hole or in part w i thout prior w r itten permission of pr ime view international co., ltd.page:22 note 12-4: definition of response tim e tr and tf: 100% 90% 10% 0% whit e w hit e bright ness blac k t r t f note 12-5: the uniform ity of lcd is defined as the minim u m brightness of the 9 testing points u = the maxim u m brightness of the 9 testing points lum i nance m e ter : bm-5a or bm-7 fast(topcon) measurem ent distance : 500 m m +/- 50 m m am bient illum i nation : < 1 lux measuring direction : perpendicular to the surface of m odule the test pattern is white (gray level 63). 25% 5 0% 75% 25% 50% 75% p-511-393(v:3)
PD080SL1 t he information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in w hole or in part w i thout prior w r itten permission of pr ime view international co., ltd.page:23 ? ya-yb ? note 12-6: cross talk (ctk) = ya 100% ya: brightness of pattern a yb: brightness of pattern b lum i nance m e ter : bm 5a (topcon) measurem ent distance : 500 m m +/- 50 m m am bient illum i nation : < 1 lux measuring direction : perpendicular to the surface of m odule p a t t er n a ( g r a y level 31) p a t t er n b (g ra y l e v e l 3 1 , c e n t ra l bl ack box exc l us i v e) : m easur i ng p o i n t ( a and b ar e at t he s a m e poi nt . ) ya yb 1/ 3 1/ 3 1/ 3 1/ 3 1 / 3 1/ 3 bl a c k ( g r a y level 0) p-511-393(v:3)
PD080SL1 the information contained herein is the excl usive property of prime view internati onal co., ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of pr ime view international co., ltd.page:24 13. handling cautions 13-1) mounting of module 4. please power off the module when you connect the input/output connector. b) please connect the ground pattern of the inverter ci rcuit surely. if the connection is not perfect, some following problems may happen possibly. 1. the noise from the backlight unit will increase. 4. the output from inverter circuit will be unstable. 4. in some cases a part of module will heat. c) polarizer which is made of soft material and susceptible to flaw must be handled carefully. d) protective film (laminator) is applied on surface to protect it against scratches and diets. it is recommended to peel off the laminator before use and taking care of static electricity. 13-2) precautions in mounting a) when metal part of the tft-lcd module (shielding lid and rear case) is soiled, wipe it with soft dry cloth. b) wipe off water drops or finger grease immediatel y. long contact with water may cause discoloration or spots. c) tft-lcd module uses glass which breaks or cracks easily if dropped or bumped on hard surface. please handle with care. d) since cmos lsi is used in the module. so take care of static electricity and earth yourself when handling. 13-3) adjusting module a) adjusting volumes on the rear face of the module have been set optimally before shipment. b) therefore, do not change any adjusted values. if adjusted values are changed, the specifications described may not be satisfied. 13-4) others a) do not expose the module to direct sunlight or intensive ultraviolet rays for many hours. b) store the module at a room temperature place. c) the voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) if lcd panel breaks, it is possibly that the liquid crystal escapes from the panel. avoid putting it into eyes or mouth. when liquid cr ystal sticks on hands, clothes or feet. wash it out immediately with soap. e) observe all other precautionary requirement s in handling general electronic components. f) please adjust the voltage of common electrode as material of attachment by 1 module. p-511-393(v:3)
PD080SL1 the information contained herein is the excl usive property of prime view internati onal co., ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of pr ime view international co., ltd.page:25 14. reliability test no test item test condition 1 high temperature storage test ta = +80
, 240 hrs 2 low temperature storage test ta = -25
, 240 hrs 3 high temperature operation test ta =+80
, 240 hrs 4 low temperature operation test ta = -25
, 240 hrs 5 high temperature & high humidity operation test ta = +60
, 90%rh, 240 hrs (no condensation) 6 thermal cycling test (non-operating) -20
?? +80
, 100 cycles 30 min 30 min 7 vibration test (non-operating) frequency j 10 ~ 57 h z , amplitude j 0.15 mm 58~500hz, 1g sweep time j 11 min ; test period j 3 hrs (1 hr for each direction of x, y, z) 8 shock test (non-operating) 80g, 6ms, x,y, z 1 times for each direction 9 electron static discharge c=150pf,r=330 ? contact=8kv d air=15kv 10 times/terminal ta: ambient temperature note: the protective film must be removed before temperature test [criteria] in the standard conditions, there is not display function ng issue occurred. (including: line defect, no image). all the cosmetic specification is judged before the reliability stress. p-511-393(v:3)
PD080SL1 t he information contained herein is the excl usive property of prime view internati onal co., ltd. and sha ll not be distributed, reproduced, or disclosed in w hole or in part w i thout prior w r itten permission of pr ime view international co., ltd.page:26 15.packing p-511-393(v:3)

▲Up To Search▲

Price & Availability of PD080SL1

	To Download PD080SL1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .