oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2011 oscilent controlled document ordering code / part number product description 835-if150.0m-06a 150.0mhz if saw filter 6.5 mhz bandwidth specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency response o smith chart o vswr notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 835-if150.0m-06a january 2011 rev a 150.0mhz if saw filter 6.5 mhz bandwidth product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit pin description b, c, d, f ground a in e out test fixture & values input l1=33 nh, c1=39 pf output l2=33 nh, c2=36pf source/load impedance 50 ?
oscilent part number 835-if150.0m-06a january 2011 rev a 150.0mhz if saw filter 6.5 mhz bandwidth product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c -20 - 70 storage temperature range c -40 - 85 maximum dc voltage v - - 10 maximum input power dbm - - 10 source impedance (single ended) (1) ? - 50 - load impedance (single ended) (1) ? - 50 - notes: with matching network (ref. test ing environment circ uit as shown above). those impedances could be modified wi th different impedance values and/or structures, if necessary. electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz - 150.0 - insertion loss at fo db - 28.6 30.0 absolute delay us - 4.79 4.85 temperature coefficient ppm/ c - -18 - amplitude ripple(fo3.125mhz) db - 0.89 1.20 group delay variation(fo3.125mhz) nsec - 75 120 bandwidth at -1db mhz - 6.50 - bandwidth at -3db mhz - 6.67 - bandwidth at -40db mhz - 7.36 7.42 bandwidth at -50db mhz - 7.43 - ultimate rejection db 42 52 - relative attenuation delta 625khz db - 45 -
oscilent part number 835-if150.0m-06a january 2011 rev a 150.0mhz if saw filter 6.5 mhz bandwidth product specification p. 3 www.oscilent.com frequency response bandwidth at ?1.0 db bandwidth at ?3.0 db bandwidth at ?40.0 db relative attenuation
oscilent part number 835-if150.0m-06a january 2011 rev a 150.0mhz if saw filter 6.5 mhz bandwidth product specification p. 4 www.oscilent.com ripple variation (fo3.125mhz) group delay variation(fo3.125mhz) smith chart
oscilent part number 835-if150.0m-06a january 2011 rev a 150.0mhz if saw filter 6.5 mhz bandwidth product specification p. 5 www.oscilent.com vswr
|