oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2011 oscilent controlled document ordering code / part number product description 813-sl125.0m-28 low-loss 125mhz if saw filter 28.5mhz bandwidth specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency response notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 813-sl125.0m-28 january 2011 rev a low-loss 125mhz if saw filter 28.5mhz bandwidth product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit pin description a, b, c, d, f, g, h, i, j, l ground k input e output test fixture & values input l1=33nh q>40 output l2=33nh q>40 source/load impedance 50 ?
oscilent part number 813-sl125.0m-28 january 2011 rev a low-loss 125mhz if saw filter 28.5mhz bandwidth product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c -30 - +80 storage temperature range c -40 - +85 maximum dc voltage v - - 10 maximum input power dbm - - 10 source impedance (single ended) (1) ? - 50 - load impedance (single ended) (1) ? - 50 - notes: with matching network (ref. test ing environment circ uit as shown above). those impedances could be modified wi th different impedance values and/or structures, if necessary. electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz - 125.0 - insertion loss at fo db - 15.5 17.0 temperature coefficient ppm/c - -86 - amplitude ripple within fo 13.0 mhz db p-p - 0.4 1.0 group delay variation within fo 13.0 mhz nsec - 25 50 absolute delay at fo sec - 0.85 - bandwidth at ?1.0 db mhz 27.5 28.5 - bandwidth at ?3.0 db mhz 28.5 29.5 - bandwidth at ?40.0 db mhz - 33.3 34.5 relative attenuation: lower sidelobe db 40 47 - upper sidelobe db 40 47 -
oscilent part number 813-sl125.0m-28 january 2011 rev a low-loss 125mhz if saw filter 28.5mhz bandwidth product specification p. 3 www.oscilent.com frequency response
|