vishay semiconductors tlhg460., tlhr460., tlhy460. document number 83007 rev. 1.7, 16-mar-11 www.vishay.com 1 for technical support, please contact: led@vishay.com this datasheet is subject to change without notice. the product described herein and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 high efficiency led, ? 3 mm tinted total diffused package features ? choice of three bright colors ? standard ? 3 (t-1) package ? small mechanical tolerances ? suitable for dc and high peak current ? very wide viewing angle ? luminous intensity categorized ? yellow and green color categorized ? compliant to rohs directive 2002/95/ec and in accordance to weee 2002/96/ec 19220 description the tlh.46.. series was de veloped for applications which need a very wide radiation angle like backlighting, general indicating and lighting purposes. it is housed in a 3 mm tinted total diffused plastic package. the wide viewing angle of these devices provides a high on-off contrast. several selection types with different luminous intensities are offered. all leds are categorized in luminous intensity groups. the green and yellow leds are categorized additionally in wavelength groups. that allows users to assemble leds with uniform appearance. applications ? status lights ? off/on indicator ? background illumination ? readout lights ? maintenance lights ? legend light product group and package data ? product group: led ? package: 3 mm ? product series: standard ? angle of half intensity: 60 ** please see document ?vishay material category policy?: www.vishay.com/doc?99902 parts table part color, luminous intensity technology tlhr4600 red, i v > 1 mcd gaasp on gap tlhr4605 red, i v > 2.5 mcd gaasp on gap tlhr4605-ms12z red, i v > 2.5 mcd gaasp on gap tlhy4600 ye l l o w, i v > 0.63 mcd gaasp on gap tlhy4600-as12 ye l l o w, i v > 0.63 mcd gaasp on gap tlhy4601 ye l l o w, i v > 1 mcd gaasp on gap tlhy4605 ye l l o w, i v > 2.5 mcd gaasp on gap tlhy4605-as12z ye l l o w, i v > 2.5 mcd gaasp on gap tlhy4605-cs12z ye l l o w, i v > 2.5 mcd gaasp on gap tlhy4605-ms12z ye l l o w, i v > 2.5 mcd gaasp on gap tlhg4600 green, i v > 1 mcd gap on gap TLHG4601-AS21 green, i v > 1.6 mcd gap on gap tlhg4605 green, i v > 4 mcd gap on gap tlhg4605-as12z green, i v > 4 mcd gap on gap tlhg4605-ms21z green, i v > 4 mcd gap on gap
www.vishay.com 2 document number 83007 rev. 1.7, 16-mar-11 vishay semiconductors tlhg460., tlhr460., tlhy460. for technical support, please contact: led@vishay.com this datasheet is subject to change without notice. the product described herein and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note: 1) in one packing unit i vmin. /i vmax. ? 0.5 note: 1) in one packing unit i vmin. /i vmax. ? 0.5 absolute maximum ratings (t amb = 25 c, unless otherwise specified) tlhr460. , tlhy460. , tlhg460. parameter test condition symbol value unit reverse voltage v r 6v dc forward current t amb ? 60 c i f 30 ma surge forward current t p ? 10 s i fsm 1a power dissipation t amb ? 60 c p v 100 mw junction temperature t j 100 c operating temperature range t amb - 20 to + 100 c storage temperature range t stg - 55 to + 100 c soldering temperature t ? 5 s, 2 mm from body t sd 260 c thermal resistance junction/ ambient r thja 400 k/w optical and electrical characteristics (t amb = 25 c, unless otherwise specified) tlhr460., red parameter test condition part symbol min. typ. max. unit luminous intensity 1) i f = 10 ma tlhr4600 i v 14 mcd tlhr4605 i v 2.5 6 mcd dominant wavelength i f = 10 ma ? d 612 625 nm peak wavelength i f = 10 ma ? p 635 nm angle of half intensity i f = 10 ma ? 60 deg forward voltage i f = 20 ma v f 23v reverse voltage i r = 10 a v r 615 v junction capacitance v r = 0, f = 1 mhz c j 50 pf optical and electrical characteristics (t amb = 25 c, unless otherwise specified) tlhy460., yellow parameter test condition part symbol min. typ. max. unit luminous intensity 1) i f = 10 ma tlhy4600 i v 0.63 3.5 mcd tlhy4601 i v 14 mcd tlhy4605 i v 2.5 5 mcd dominant wavelength i f = 10 ma ? d 581 594 nm peak wavelength i f = 10 ma ? p 585 nm angle of half intensity i f = 10 ma ? 60 deg forward voltage i f = 20 ma v f 2.4 3 v reverse voltage i r = 10 a v r 615 v junction capacitance v r = 0, f = 1 mhz c j 50 pf
document number 83007 rev. 1.7, 16-mar-11 www.vishay.com 3 vishay semiconductors tlhg460., tlhr460., tlhy460. for technical support, please contact: led@vishay.com this datasheet is subject to change without notice. the product described herein and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note: 1) in one packing unit i vmin. /i vmax. ? 0.5 note: luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of 11 %. these type numbers represent the order groups which include only a few brightness groups. only one gr oup will be ship ped on each bag (there will be no mixing of two groups on each bag). in order to ensure availability, single brightness groups will not be orderable. in a similar manner for colors where wavelength groups are measured and binned, single wave length groups will be shipped on any one bag. in order to ensure availability, single wavelength groups will not be orderable. note: wavelengths are tested at a current pulse duration of 25 ms. typical characteristics (t amb = 25 c, unless otherwise specified) optical and electrical characteristics (t amb = 25 c, unless otherwise specified) tlhg460., green parameter test condition part symbol min. typ. max. unit luminous intensity 1) i f = 10 ma tlhg4600 i v 14 mcd tlhg4601 i v 1.6 3.5 mcd tlhg4605 i v 46 mcd dominant wavelength i f = 10 ma ? d 562 575 nm peak wavelength i f = 10 ma ? p 565 nm angle of half intensity i f = 10 ma ? 60 deg forward voltage i f = 20 ma v f 2.4 3 v reverse voltage i r = 10 a v r 615 v junction capacitance v r = 0, f = 1 mhz c j 50 pf luminous intensity classification group light intensity (mcd) standard min. max. k 0.63 1.25 l 1 2 m 1.6 3.2 n 2.5 5 p 4 8 q 6.3 12.5 r 10 20 s 16 32 t 25 50 u 40 80 color classification group dom. wavelength (nm) yellow green min. max. min. max. 0 1 581 584 2 583 586 3 585 588 562 565 4 587 590 564 567 5 589 592 566 569 6 591 594 568 571 7 570 573 8 572 575 figure 1. forward current vs. ambient temperature 0 10 20 30 40 60 i f - for w ard c u rrent (ma) 95 10905 50 t am b - am b ient temperat u re (c) 100 8 0 60 40 20 0 figure 2. forward current vs. pulse length 0.02 0.05 0.1 0.2 1 0.5 t p /t= 0.01 t am b 65 c 0.01 0.1 1 10 1 10 100 1000 10 000 t p - p u lse length (ms) 100 95 10047 i - for w ard c u rrent (ma) f
www.vishay.com 4 document number 83007 rev. 1.7, 16-mar-11 vishay semiconductors tlhg460., tlhr460., tlhy460. for technical support, please contact: led@vishay.com this datasheet is subject to change without notice. the product described herein and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 figure 3. rel. luminous intensity vs. angular displacement figure 4. forward current vs. forward voltage figure 5. rel. luminous intensity vs. ambient temperature 0.4 0.2 0 95 10043 0.6 0.9 0. 8 0 30 10 20 40 50 60 70 8 0 0.7 1.0 i - relati v el u mino u s intensity v rel ? - ang u lar displacement red t p /t = 0.001 t p = 10 s 0.1 1 10 100 1000 95 10026 v f - for w ard v oltage ( v ) i f - for w ard c u rrent (ma) 10 8 6 4 2 0 0 0 0.4 0. 8 1.2 1.6 95 10027 20 40 60 8 0 100 i v rel - relati v e l u mino u s intensity t am b - am b ient temperat u re (c) i f = 10 ma red figure 6. rel. lumin. intensity vs. forw. current/duty cycle figure 7. relative luminous intensity vs. forward current figure 8. relative intensity vs. wavelength 10 20 50 100 200 0 0.4 0. 8 1.2 1.6 2.4 95 10321 500 0.5 0.2 0.1 0.05 0.02 1 i f (ma) t p /t 2.0 i v rel - relati v e l u mino u s intensity red 0.01 0.1 1 10 i f - for w ard c u rrent (ma) 100 10 95 10029 i v rel - relati v e l u mino u s intensity red 1 590 610 630 650 670 0 0.2 0.4 0.6 0. 8 1.2 690 95 10040 - w a v elength (nm) 1.0 red i v rel - relati v e l u mino u s intensity
document number 83007 rev. 1.7, 16-mar-11 www.vishay.com 5 vishay semiconductors tlhg460., tlhr460., tlhy460. for technical support, please contact: led@vishay.com this datasheet is subject to change without notice. the product described herein and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 figure 9. forward current vs. forward voltage figure 10. rel. luminous intens ity vs. ambient temperature figure 11. rel. lumin. intensity vs. forw. current/duty cycle 0.1 1 10 100 1000 10 8 6 4 2 0 95 10030 v f - for w ard v oltage ( v ) i f - for w ard c u rrent (ma) yello w t p /t = 0.001 t p = 10 s 0 0 0.4 0. 8 1.2 1.6 95 10031 20 40 60 8 0 100 i v rel - relati v e l u mino u s intensity t am b - am b ient temperat u re (c) yello w i f = 10 ma yello w 10 20 50 100 200 0 0.4 0. 8 1.2 1.6 2.4 95 10260 500 0.5 0.2 0.1 0.05 0.02 1 i f (ma) t p /t i spec - specific l u mino u s intensity 2.0 figure 12. relative luminous intensity vs. forward current figure 13. relative intensity vs. wavelength figure 14. forward current vs. forward voltage yello w i f - for w ard c u rrent (ma) 100 0.1 1 10 95 10033 i v rel - relati v e l u mino u s intensity 10 1 0.01 550 570 590 610 630 0 0.2 0.4 0.6 0. 8 1.2 650 95 10039 - w a v elength (nm) 1.0 yello w i rel - relati v e intensity 0.1 1 10 100 1000 10 8 6 4 2 0 95 10034 v f - for w ard v oltage ( v ) i f - for w ard c u rrent (ma) green t p /t = 0.001 t p = 10 s
www.vishay.com 6 document number 83007 rev. 1.7, 16-mar-11 vishay semiconductors tlhg460., tlhr460., tlhy460. for technical support, please contact: led@vishay.com this datasheet is subject to change without notice. the product described herein and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 figure 15. rel. luminous intens ity vs. ambient temperature figure 16. rel. lumin. intensity vs. forw. current/duty cycle figure 17. relative luminous intensity vs. forward current 0 0.4 0. 8 1.2 1.6 95 10035 i v rel - relati v e l u mino u s intensity green i f = 10 ma t am b - am b ient temperat u re (c) 20 40 60 8 0 0100 10 20 50 100 200 0 0.4 0. 8 1.2 1.6 2.4 164 8 6 500 v rel 2.0 green i - specific l u mino u s intensity 1 0.5 0.2 0.05 0.02 t p /t i f /ma 0.1 i f - for w ard c u rrent (ma) 100 green 0.1 1 10 95 10037 i v rel - relati v e l u mino u s intensity 10 1 figure 18. relative intensity vs. wavelength 520 540 560 5 8 0600 0 0.2 0.4 0.6 0. 8 1.2 620 95 1003 8 - w a v elength (nm) 1.0 green i rel - relati v e intensity
document number 83007 rev. 1.7, 16-mar-11 www.vishay.com 7 vishay semiconductors tlhg460., tlhr460., tlhy460. for technical support, please contact: led@vishay.com this datasheet is subject to change without notice. the product described herein and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters ? 3.2 0.15 ? 2.9 0.15 0.4 + 0.15 - 0.05 < 0.6 3.5 0.1 4.5 0.3 5. 8 0.3 30.3 0.5 1.5 0.25 0.6 0.15 2.54 nom. dra w ing- n o.: 6.544-5255.01-4 iss u e: 7; 25.09.0 8 95 10913 specifications according to di n technical dra w ings a c area not plane (2.5) r 1.4 (sphere)
www.vishay.com 8 document number 83007 rev. 1.7, 16-mar-11 vishay semiconductors tlhg460., tlhr460., tlhy460. for technical support, please contact: led@vishay.com this datasheet is subject to change without notice. the product described herein and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 tape ammopack note: as12z and as21z still valid for already existing types but not for new design tape dimensions in millimeters figure 19. led in tape paper adhesi v e tape identification la b el reel tape diodes: anode b efore cathode phototransistors: emitter b efore collector code 21 diodes: cathode b efore anode phototransistors: collector b efore emitter code 12 94 8 671 figure 20. tape direction tape feed c b a 94 8 667-1 la b el option dim. ?h? 0.5 mm as 17.3 ms 25.5 cs 22.0 reel (mat. - n o. 1764) q u antity per: 2000 94 8 171 0.3 0.2 2.54 + 0.6 - 0.1 12.7 0.2 5.0 8 0.7 1 8 + 1 - 0.5 9 0.5 meas u re limit o v er 20 index-holes: 1 12 0.3 0.9 max. 6.35 0.7 ? 4 0.2 12.7 1 1 ?h? 2
legal disclaimer notice www.vishay.com vishay revision: 12-mar-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products no t expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale , including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding th e design or manufacture of the part. please contact authorized vishay personnel t o obtain written terms and conditions regardin g products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu.
|
